Overclock.net › Forums › Intel › Intel CPUs › Help OC E6600 past 2.85 GHz please!
New Posts  All Forums:Forum Nav:

Help OC E6600 past 2.85 GHz please! - Page 2

post #11 of 17
Just bump the FSB up. Give the NB a little more voltage and make sure your CPU has enough voltage. Hell with the 1.1 ram ratio its stupid.
VICE
(19 items)
 
  
CPUMotherboardGraphicsRAM
AMD Ryzen 5 1600 ASUS ROG STRIX B350-F GAMING ASUS ROG Strix RX 560 4g OC CORSAIR Vengeance LPX 16GB DDR4-3000 
Hard DriveHard DriveHard DriveCooling
Corsair Force MP500 Series M.2 SSD 240GB  256gb Kingston HyperX Savage SSD 240gb Sandisk Extreme SSD  Barrow LTYK3A-04 
CoolingCoolingCoolingOS
EK 480mm Radiator 2x XSPC Photon 170 D5 Pump/Res Combos 360mm Swiftech Radiator  Windows 10 64-Bit 
MonitorKeyboardPowerCase
Dell UltraSharp U2412M Custom WASD mechanical Evga 750w SuperNOVA G2 CaseLabs Merlin SM8 
MouseMouse PadAudio
CM Storm Xornet ROG Asus SupremeFX Realtek 1220 
  hide details  
Reply
VICE
(19 items)
 
  
CPUMotherboardGraphicsRAM
AMD Ryzen 5 1600 ASUS ROG STRIX B350-F GAMING ASUS ROG Strix RX 560 4g OC CORSAIR Vengeance LPX 16GB DDR4-3000 
Hard DriveHard DriveHard DriveCooling
Corsair Force MP500 Series M.2 SSD 240GB  256gb Kingston HyperX Savage SSD 240gb Sandisk Extreme SSD  Barrow LTYK3A-04 
CoolingCoolingCoolingOS
EK 480mm Radiator 2x XSPC Photon 170 D5 Pump/Res Combos 360mm Swiftech Radiator  Windows 10 64-Bit 
MonitorKeyboardPowerCase
Dell UltraSharp U2412M Custom WASD mechanical Evga 750w SuperNOVA G2 CaseLabs Merlin SM8 
MouseMouse PadAudio
CM Storm Xornet ROG Asus SupremeFX Realtek 1220 
  hide details  
Reply
post #12 of 17
Thread Starter 
K I will give the NB more volts and the CPU.... Here's to hoping
post #13 of 17
Might be easier to if you set your ram to "Unlinked"
VICE
(19 items)
 
  
CPUMotherboardGraphicsRAM
AMD Ryzen 5 1600 ASUS ROG STRIX B350-F GAMING ASUS ROG Strix RX 560 4g OC CORSAIR Vengeance LPX 16GB DDR4-3000 
Hard DriveHard DriveHard DriveCooling
Corsair Force MP500 Series M.2 SSD 240GB  256gb Kingston HyperX Savage SSD 240gb Sandisk Extreme SSD  Barrow LTYK3A-04 
CoolingCoolingCoolingOS
EK 480mm Radiator 2x XSPC Photon 170 D5 Pump/Res Combos 360mm Swiftech Radiator  Windows 10 64-Bit 
MonitorKeyboardPowerCase
Dell UltraSharp U2412M Custom WASD mechanical Evga 750w SuperNOVA G2 CaseLabs Merlin SM8 
MouseMouse PadAudio
CM Storm Xornet ROG Asus SupremeFX Realtek 1220 
  hide details  
Reply
VICE
(19 items)
 
  
CPUMotherboardGraphicsRAM
AMD Ryzen 5 1600 ASUS ROG STRIX B350-F GAMING ASUS ROG Strix RX 560 4g OC CORSAIR Vengeance LPX 16GB DDR4-3000 
Hard DriveHard DriveHard DriveCooling
Corsair Force MP500 Series M.2 SSD 240GB  256gb Kingston HyperX Savage SSD 240gb Sandisk Extreme SSD  Barrow LTYK3A-04 
CoolingCoolingCoolingOS
EK 480mm Radiator 2x XSPC Photon 170 D5 Pump/Res Combos 360mm Swiftech Radiator  Windows 10 64-Bit 
MonitorKeyboardPowerCase
Dell UltraSharp U2412M Custom WASD mechanical Evga 750w SuperNOVA G2 CaseLabs Merlin SM8 
MouseMouse PadAudio
CM Storm Xornet ROG Asus SupremeFX Realtek 1220 
  hide details  
Reply
post #14 of 17
Thread Starter 
K if I set it to unlink then what should my ram settings be? I'm pretty new to this so far I have left it linked.
post #15 of 17
Thread Starter 
And also any recommended NB settings? Right now its at 1.34 volts, I'm going to increase, just not sure by how much.
post #16 of 17
Thread Starter 
I DID IT! I'm running at 3.0GHz!!! Thanks to you guys and your recommendations. I also did some more research and decided to alter some of my bios settings from Auto to settings I found desirable. My settings are as follows:

AI Tuning: Manual
Nvidia GPU Ex: Disabled
LinkBoost: Disabled

FSB - Memory Clock Mode: Unlinked
x FSB - Memory Raio: N/A
FSB (QDR), Mhz: 1200 (means 300FSB)
Actual FSB (QDR), Mhz: 1200
MEM (DDR), Mhz: 800 (means 333mhz speeds)
Actual MEM (DDR), Mhz: 800

Vcore Voltage:1.4250
Memory Voltage: 2.2
1.2v HT Voltage: 1.35
NB Core Voltage: 1.40
SB Core Voltage: 1.5
CPU VTT Voltage: 1.35
DDRII Controller Ref Voltage:auto
DDRII Channel A Ref Voltage:auto
DDRII Channel B Ref Voltage:auto

tCL (CAS Latency): 4
tRCD: 4
tRP: 4
tRAS: 12
Command Per Clock (CMD): 2 clock (2T)

Mulitplier 10x

Advance Memory Settings
tRRD: AUTO
tRC: AUTO
tWR: AUTO
tWTR: AUTO
tREF: AUTO
tRD: AUTO
tRFC: AUTO
Async Latency: AUTO

CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
MCP PCIE Spread Spectrum: Disabled
SATA Spread Spectrum: Disabled
LDT Spread Spectrum: Disabled

CPU Internal Thermal Control: Disabled
Limit CPUID MaxVal: Disabled
Enhanced C1 (C1E): Disabled
Execute Disable Bit: Disabled
Virtualization Technology: Disabled
Enhanced Intel Speedstep Tech: Disabled
LDT Frequency: 5x

PCIEX16_1 Frequency (Mhz): 100
PCIEX16_2 Frequency (Mhz): 100
PCIEX16_3 Frequency (Mhz): 100
SPP<->MCP Ref Clock, Mhz: 200


Also The reason I wasn't getting about 2.85GHz before I believe is because of my RAM settings. I had it linked, and it set and 1:1 ratio, however after a little more research someone suggested that I change that to Unlinked and leave my Ram at what it was originally, which was 800. So now its unlinked and FBS running at 333.33 (1333.33) and RAM at 800. Changing this setting is the thing that allowed my comp to start without BSOD after pushing it past 2.85GHz! I'm so excited. My temps on windows idle is 33 C for core and MB is 36 C. Will do some stress testing at 3.0GHz to check stability. Also I changed my timings back to tighter timings, (4-4-4-12 and 2T).

However I do have one more question. If I keep increasing my FBS, how long can I maintain my RAM @ 800 before having to alter it? Any recommended settings?

Once again thank you to everyone that looked at this thread and replied!
post #17 of 17
Set all your voltages to auto. Then head to Asus's overclock settings. Manual mode. FSB settings. Unlinked. 1333 CPU 800FSB RAM. Worked fine exactly like that for me on a 650i.
    
CPUMotherboardGraphicsRAM
Intel Core 2 Quad Q9450 2.66ghz Asus Striker II Formula nForce 780i Nvidia eVGA Superclocked 8800GT SLI 4 x 1GB OCZ PC8500 1066mhz SLI READY 
Hard DriveOptical DriveOSMonitor
2 x WD 250GB SATA RAID 0 + 2 x SG 320GB Storage 2 x DVD-RW SATA+IDE Windows Vista™ Ultimate 64-bit Service Pack 1 Samsung Syncmaster 2032BW 
KeyboardPowerCaseMouse
Logitech EX110 Keyboard OCZ 600W StealthXStream Antec P182 Logitech EX110 Cordless Mouse 
Mouse Pad
Random Mouse Pad 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Core 2 Quad Q9450 2.66ghz Asus Striker II Formula nForce 780i Nvidia eVGA Superclocked 8800GT SLI 4 x 1GB OCZ PC8500 1066mhz SLI READY 
Hard DriveOptical DriveOSMonitor
2 x WD 250GB SATA RAID 0 + 2 x SG 320GB Storage 2 x DVD-RW SATA+IDE Windows Vista™ Ultimate 64-bit Service Pack 1 Samsung Syncmaster 2032BW 
KeyboardPowerCaseMouse
Logitech EX110 Keyboard OCZ 600W StealthXStream Antec P182 Logitech EX110 Cordless Mouse 
Mouse Pad
Random Mouse Pad 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Help OC E6600 past 2.85 GHz please!