Overclock.net › Forums › Intel › Intel CPUs › stock voltage on q6600?
New Posts  All Forums:Forum Nav:

stock voltage on q6600?

post #1 of 6
Thread Starter 
What is the stock voltage of a q6600?

Thanks
The up/downgrade
(14 items)
 
  
CPUMotherboardGraphicsRAM
|Intel 6800K @ 4ghz 1.24v| |Asus ROG Strix X99| |Gainward GTX 1070 @ ~2ghz| |4x4gb Corsair XMS 3000mhz CL14| 
Hard DriveOSMonitorKeyboard
|840 Pro 256gb| |OCZ Vertex 2 120gb| |WD Red 2tb| |Windows 10 Pro x64| |27" QNIX QX2710 @ 2560x1440 120hz| |Logitech G810 Orion Spectrum RGB| 
PowerCaseMouseAudio
|EVGA SuperNOVA 1000 G2| |Corsair 750D| |Logitech G502 Proteus Spectrum RGB|  |JBL L890 speakers| 
AudioAudio
|Emotiva XDA-2 receiver| |2x Advanced Acoustic MAA-705 @ 200w 8ohm| 
  hide details  
Reply
The up/downgrade
(14 items)
 
  
CPUMotherboardGraphicsRAM
|Intel 6800K @ 4ghz 1.24v| |Asus ROG Strix X99| |Gainward GTX 1070 @ ~2ghz| |4x4gb Corsair XMS 3000mhz CL14| 
Hard DriveOSMonitorKeyboard
|840 Pro 256gb| |OCZ Vertex 2 120gb| |WD Red 2tb| |Windows 10 Pro x64| |27" QNIX QX2710 @ 2560x1440 120hz| |Logitech G810 Orion Spectrum RGB| 
PowerCaseMouseAudio
|EVGA SuperNOVA 1000 G2| |Corsair 750D| |Logitech G502 Proteus Spectrum RGB|  |JBL L890 speakers| 
AudioAudio
|Emotiva XDA-2 receiver| |2x Advanced Acoustic MAA-705 @ 200w 8ohm| 
  hide details  
Reply
post #2 of 6
depends on the chip..

if you run core temp it will tell you the VID, which is the voltage needed to run at stock on that particular chip. some are 1.21 others 1.32

Usually it will go to 3.0 on that voltage as well.
The Money Pit
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7-950 - 4.24 @ 1.40v Batch #3941B089 EVGA X58 SLI LE MSI 580 GTX Lightning - 950/1900/2200 @ 1.1v 6GB Mushkin @ 1475 - 6-8-6-24 
Hard DriveHard DriveOptical DriveCooling
120GB Vertex Plus 2 x 500GB WD Blues RAID0 Lite-On DVD/CD Custom H20 Loop 
OSMonitorPowerCase
Win 7 Ulti-64 25" I-Inc iH253 Antec TruePower New TP-750 CoolerMaster HAF 932 
  hide details  
Reply
The Money Pit
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7-950 - 4.24 @ 1.40v Batch #3941B089 EVGA X58 SLI LE MSI 580 GTX Lightning - 950/1900/2200 @ 1.1v 6GB Mushkin @ 1475 - 6-8-6-24 
Hard DriveHard DriveOptical DriveCooling
120GB Vertex Plus 2 x 500GB WD Blues RAID0 Lite-On DVD/CD Custom H20 Loop 
OSMonitorPowerCase
Win 7 Ulti-64 25" I-Inc iH253 Antec TruePower New TP-750 CoolerMaster HAF 932 
  hide details  
Reply
post #3 of 6
Thread Starter 
I have the GO stepping! I will check this out
The up/downgrade
(14 items)
 
  
CPUMotherboardGraphicsRAM
|Intel 6800K @ 4ghz 1.24v| |Asus ROG Strix X99| |Gainward GTX 1070 @ ~2ghz| |4x4gb Corsair XMS 3000mhz CL14| 
Hard DriveOSMonitorKeyboard
|840 Pro 256gb| |OCZ Vertex 2 120gb| |WD Red 2tb| |Windows 10 Pro x64| |27" QNIX QX2710 @ 2560x1440 120hz| |Logitech G810 Orion Spectrum RGB| 
PowerCaseMouseAudio
|EVGA SuperNOVA 1000 G2| |Corsair 750D| |Logitech G502 Proteus Spectrum RGB|  |JBL L890 speakers| 
AudioAudio
|Emotiva XDA-2 receiver| |2x Advanced Acoustic MAA-705 @ 200w 8ohm| 
  hide details  
Reply
The up/downgrade
(14 items)
 
  
CPUMotherboardGraphicsRAM
|Intel 6800K @ 4ghz 1.24v| |Asus ROG Strix X99| |Gainward GTX 1070 @ ~2ghz| |4x4gb Corsair XMS 3000mhz CL14| 
Hard DriveOSMonitorKeyboard
|840 Pro 256gb| |OCZ Vertex 2 120gb| |WD Red 2tb| |Windows 10 Pro x64| |27" QNIX QX2710 @ 2560x1440 120hz| |Logitech G810 Orion Spectrum RGB| 
PowerCaseMouseAudio
|EVGA SuperNOVA 1000 G2| |Corsair 750D| |Logitech G502 Proteus Spectrum RGB|  |JBL L890 speakers| 
AudioAudio
|Emotiva XDA-2 receiver| |2x Advanced Acoustic MAA-705 @ 200w 8ohm| 
  hide details  
Reply
post #4 of 6
as 10acjed said - the stock voltage varies from chip to chip - mine has a high stock voltage of 1.3125v
The core VID is the stock voltage and this is what the motherboard should set as the auto voltage level at default clocks [2.4ghz] - but who runs a Q6600 at stock....i run mine at 3.6ghz - much faster

I can overclock my processor to 3ghz with less than stock voltage [1.268v vs 1.3125v] and the lower the voltage needed, the lower the temps

i can get 3.2ghz at about 1.325v also but then for 3.6ghz it is much higher - almost 1.5v [about 1.46v]

Anything up to 3.2ghz is easy with the stock heatsink, but anything higher and you will want another heatsink
hope that helps
My System
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 4771 GA-Z87X-UD3H 2*HD5850 4gb G.Skill Ripjaw + 8gb Corsair XMS3 1600 cl8 
Hard DriveOSMonitorKeyboard
Samsung 840 Pro 256gb | 3*3TB Raid 5 | Corsair F60 Windows 8 x64 *EYEFINITY* Dell 2405FPW + 2*E248WFP Logitech Illuminated 
PowerCaseMouseAudio
Corsair HX-850v2 Lian Li v2010b M$ Basic  Asus Xonar D2X 
AudioAudio
Swan D1080 MK II 08  Shure SRH-440 
  hide details  
Reply
My System
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 4771 GA-Z87X-UD3H 2*HD5850 4gb G.Skill Ripjaw + 8gb Corsair XMS3 1600 cl8 
Hard DriveOSMonitorKeyboard
Samsung 840 Pro 256gb | 3*3TB Raid 5 | Corsair F60 Windows 8 x64 *EYEFINITY* Dell 2405FPW + 2*E248WFP Logitech Illuminated 
PowerCaseMouseAudio
Corsair HX-850v2 Lian Li v2010b M$ Basic  Asus Xonar D2X 
AudioAudio
Swan D1080 MK II 08  Shure SRH-440 
  hide details  
Reply
post #5 of 6
Thread Starter 
Quote:
Originally Posted by scottath View Post
as 10acjed said - the stock voltage varies from chip to chip - mine has a high stock voltage of 1.3125v
The core VID is the stock voltage and this is what the motherboard should set as the auto voltage level at default clocks [2.4ghz] - but who runs a Q6600 at stock....i run mine at 3.6ghz - much faster

I can overclock my processor to 3ghz with less than stock voltage [1.268v vs 1.3125v] and the lower the voltage needed, the lower the temps

i can get 3.2ghz at about 1.325v also but then for 3.6ghz it is much higher - almost 1.5v [about 1.46v]

Anything up to 3.2ghz is easy with the stock heatsink, but anything higher and you will want another heatsink
hope that helps
hehe.. I have watercooling so no problem I can run mine at 3.2ghz with 1.33v in realtime! I think thats good?
The up/downgrade
(14 items)
 
  
CPUMotherboardGraphicsRAM
|Intel 6800K @ 4ghz 1.24v| |Asus ROG Strix X99| |Gainward GTX 1070 @ ~2ghz| |4x4gb Corsair XMS 3000mhz CL14| 
Hard DriveOSMonitorKeyboard
|840 Pro 256gb| |OCZ Vertex 2 120gb| |WD Red 2tb| |Windows 10 Pro x64| |27" QNIX QX2710 @ 2560x1440 120hz| |Logitech G810 Orion Spectrum RGB| 
PowerCaseMouseAudio
|EVGA SuperNOVA 1000 G2| |Corsair 750D| |Logitech G502 Proteus Spectrum RGB|  |JBL L890 speakers| 
AudioAudio
|Emotiva XDA-2 receiver| |2x Advanced Acoustic MAA-705 @ 200w 8ohm| 
  hide details  
Reply
The up/downgrade
(14 items)
 
  
CPUMotherboardGraphicsRAM
|Intel 6800K @ 4ghz 1.24v| |Asus ROG Strix X99| |Gainward GTX 1070 @ ~2ghz| |4x4gb Corsair XMS 3000mhz CL14| 
Hard DriveOSMonitorKeyboard
|840 Pro 256gb| |OCZ Vertex 2 120gb| |WD Red 2tb| |Windows 10 Pro x64| |27" QNIX QX2710 @ 2560x1440 120hz| |Logitech G810 Orion Spectrum RGB| 
PowerCaseMouseAudio
|EVGA SuperNOVA 1000 G2| |Corsair 750D| |Logitech G502 Proteus Spectrum RGB|  |JBL L890 speakers| 
AudioAudio
|Emotiva XDA-2 receiver| |2x Advanced Acoustic MAA-705 @ 200w 8ohm| 
  hide details  
Reply
post #6 of 6
Well it isnt Go actually,its G0,Gee Zero
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › stock voltage on q6600?