post #1 of 1
Thread Starter 
So I finally found the hardware to mount my Zalman 9500 on my Phenom 9600 that is in my folding rig/media center. I mounted it and went to turn it back on and I just get lights on and hard drives spinning but no beeps or video. I reset the BIOS and get the same thing. I take it all apart with just the bare essentials and still get the same thing. I then put the stock HSF back on and it boots up no problem (weird, I know). I put the Zalman back on and get no boot again. I then just placed the Zalman on the chip without mounting it and it booted up fine. As soon as I mount it I run into a no boot situation.

This is a really bazaar situation and I don't know what to do.
HTPC
(13 items)
 
  
CPUMotherboardGraphicsRAM
i3 2120T Gigabyte Z68XP-UD3 i3 HD2000 8gb Kingston HyperX Blu 
Hard DriveOptical DriveOSMonitor
9.5 TB Storage Samsung BD-ROM Windows 7 Prof 47in LG LCD 
KeyboardPowerCaseMouse
I/O Gear Wireless 500W FSP CM690 Dell M2010 Remote 
  hide details  
Reply
HTPC
(13 items)
 
  
CPUMotherboardGraphicsRAM
i3 2120T Gigabyte Z68XP-UD3 i3 HD2000 8gb Kingston HyperX Blu 
Hard DriveOptical DriveOSMonitor
9.5 TB Storage Samsung BD-ROM Windows 7 Prof 47in LG LCD 
KeyboardPowerCaseMouse
I/O Gear Wireless 500W FSP CM690 Dell M2010 Remote 
  hide details  
Reply