Overclock.net › Forums › Intel › Intel Motherboards › DFI NB heatsink is huge!!
New Posts  All Forums:Forum Nav:

DFI NB heatsink is huge!!

post #1 of 15
Thread Starter 
The dang heatsink on my DFI board prevented me from properly installing my ACF7Pro. It's on there but blowing up into my hard drives and PSU.

I just ordered a Xigmatek HDT-S1283 from the egg and I hope this think clears that NB heatsink. The ACF7Pro didn't clear it, the fins off the heat pipes were too close to the base and it ran into the NB heatsink and I couldn't mount it (the right way, blowing out the back).

Does anyone have this Xigmatek heatsink or a DFI LP UT P35 T2R? If so what HSF do you have installed?

I didn't want a Tuniq. I was going for a TRUE but the egg was out and I read this xigmatek was equal to it, and cheaper.

Cause I am having a hard time with finding a good HSF that will clear the NB.

Vegeta 2.0
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 @ 3.2GHz (400 x 8 @ 1.4v) «Lapped» DFI Lan Party UT P35 T2R BFG 8800GTS 640MB (625/1950/1400) 4GB (2 x 2GB) OCZ Platinum 1066MHz 
Hard DriveOptical DriveOSMonitor
Seagate 320GB and 160GB || Western Digital 250GB DVD-RW Vista Ultimate x64 2 x 19" Widescreens (2880x900) 
KeyboardPowerCase
Eclipse II Antec Earthwatts 500W Thermaltake Armor 
  hide details  
Reply
Vegeta 2.0
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 @ 3.2GHz (400 x 8 @ 1.4v) «Lapped» DFI Lan Party UT P35 T2R BFG 8800GTS 640MB (625/1950/1400) 4GB (2 x 2GB) OCZ Platinum 1066MHz 
Hard DriveOptical DriveOSMonitor
Seagate 320GB and 160GB || Western Digital 250GB DVD-RW Vista Ultimate x64 2 x 19" Widescreens (2880x900) 
KeyboardPowerCase
Eclipse II Antec Earthwatts 500W Thermaltake Armor 
  hide details  
Reply
post #2 of 15
a TRUE won't fit so be glad you didn't get it, but Tuniq fits fine but I don't know about the Xigma.
Eowyn
(13 items)
 
  
CPUMotherboardGraphicsRAM
1055T x6 Biostar TA890FXE MSI 465(470)TFII GE 750/1900 G.Skill 2x2GB DDR3 
Hard DriveOSMonitorKeyboard
WD 640AAKS Ubuntu 10.10 2x24" Asus MS Arc 
PowerCaseMouse
610 PC P&C Silencer P182 Logitech Marathon 
  hide details  
Reply
Eowyn
(13 items)
 
  
CPUMotherboardGraphicsRAM
1055T x6 Biostar TA890FXE MSI 465(470)TFII GE 750/1900 G.Skill 2x2GB DDR3 
Hard DriveOSMonitorKeyboard
WD 640AAKS Ubuntu 10.10 2x24" Asus MS Arc 
PowerCaseMouse
610 PC P&C Silencer P182 Logitech Marathon 
  hide details  
Reply
post #3 of 15
Thread Starter 
Yeah... I heard a bunch of things about the TRUE so I bypassed it. The xigmatek seems high enough to clear it, but I dunno. If not I might have to dremel some of the fin off to make it fit. Someone reviewed it on the egg and said it fit their DFI DK P35. And those have the same NB as the DFI LP UT, just black.
Vegeta 2.0
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 @ 3.2GHz (400 x 8 @ 1.4v) «Lapped» DFI Lan Party UT P35 T2R BFG 8800GTS 640MB (625/1950/1400) 4GB (2 x 2GB) OCZ Platinum 1066MHz 
Hard DriveOptical DriveOSMonitor
Seagate 320GB and 160GB || Western Digital 250GB DVD-RW Vista Ultimate x64 2 x 19" Widescreens (2880x900) 
KeyboardPowerCase
Eclipse II Antec Earthwatts 500W Thermaltake Armor 
  hide details  
Reply
Vegeta 2.0
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 @ 3.2GHz (400 x 8 @ 1.4v) «Lapped» DFI Lan Party UT P35 T2R BFG 8800GTS 640MB (625/1950/1400) 4GB (2 x 2GB) OCZ Platinum 1066MHz 
Hard DriveOptical DriveOSMonitor
Seagate 320GB and 160GB || Western Digital 250GB DVD-RW Vista Ultimate x64 2 x 19" Widescreens (2880x900) 
KeyboardPowerCase
Eclipse II Antec Earthwatts 500W Thermaltake Armor 
  hide details  
Reply
post #4 of 15
You sure? I've got the DK P35 board, and my Freezer 7 Pro fits..

Which way are you exhausting, out the back or upwards?? (edit - Just seen, same way as mine)

Xigma has some issues i think, look for one of Ch3f's threads, explains it in there.

Fits, see:





I've just ordered the big ol' Noctua sink, that fits just fine (i hope!)
post #5 of 15
Quote:
Originally Posted by wigseryc View Post
You sure? I've got the DK P35 board, and my Freezer 7 Pro fits..

Which way are you exhausting, out the back or upwards?? (edit - Just seen, same way as mine)

Xigma has some issues i think, look for one of Ch3f's threads, explains it in there.

Fits, see:





I've just ordered the big ol' Noctua sink, that fits just fine (i hope!)
My ACF7Pro fit as well.
Upgrade
(13 items)
 
For Sale: For Sale: Single Stage Phase Change
$300 (USD) or best offer
 
CPUMotherboardGraphicsRAM
7600K Gigabyte Z270P-D3-CF Nvidia GTX 1060 6GB Ballistix Elite 8GB Kit (4GBx2) DDR4 3000 MT/s 
CoolingOSMonitorKeyboard
Custom Loop|360 Rad w/3x H1011|D5Vario|Custom M... Win10 Pro PX2710MW G510 
PowerCaseMouseMouse Pad
Seasonic SSR-650RM DangerDen Torture Rack G500 Big! 
Audio
ASUS Xonar DX 
  hide details  
Reply
Upgrade
(13 items)
 
For Sale: For Sale: Single Stage Phase Change
$300 (USD) or best offer
 
CPUMotherboardGraphicsRAM
7600K Gigabyte Z270P-D3-CF Nvidia GTX 1060 6GB Ballistix Elite 8GB Kit (4GBx2) DDR4 3000 MT/s 
CoolingOSMonitorKeyboard
Custom Loop|360 Rad w/3x H1011|D5Vario|Custom M... Win10 Pro PX2710MW G510 
PowerCaseMouseMouse Pad
Seasonic SSR-650RM DangerDen Torture Rack G500 Big! 
Audio
ASUS Xonar DX 
  hide details  
Reply
post #6 of 15
Thread Starter 
Oh eff. I guess there is a difference in those heatsinks then between the DK and LP UT... I had to exhaust pointing up because I couldn't fit it exhausting back. It was very very close, and I probably could have forced it to fit but then I was afraid it would have mounted incorrectly. My NB might be a tad closer than yours...
Vegeta 2.0
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 @ 3.2GHz (400 x 8 @ 1.4v) «Lapped» DFI Lan Party UT P35 T2R BFG 8800GTS 640MB (625/1950/1400) 4GB (2 x 2GB) OCZ Platinum 1066MHz 
Hard DriveOptical DriveOSMonitor
Seagate 320GB and 160GB || Western Digital 250GB DVD-RW Vista Ultimate x64 2 x 19" Widescreens (2880x900) 
KeyboardPowerCase
Eclipse II Antec Earthwatts 500W Thermaltake Armor 
  hide details  
Reply
Vegeta 2.0
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 @ 3.2GHz (400 x 8 @ 1.4v) «Lapped» DFI Lan Party UT P35 T2R BFG 8800GTS 640MB (625/1950/1400) 4GB (2 x 2GB) OCZ Platinum 1066MHz 
Hard DriveOptical DriveOSMonitor
Seagate 320GB and 160GB || Western Digital 250GB DVD-RW Vista Ultimate x64 2 x 19" Widescreens (2880x900) 
KeyboardPowerCase
Eclipse II Antec Earthwatts 500W Thermaltake Armor 
  hide details  
Reply
post #7 of 15
If it makes a difference, my F7Pro fan frame, the black plastic bit that snaps around the edge of the fins, touches the NB heatsink ever so slightly..

Makes no difference to temps whatsoever though.
post #8 of 15
Thread Starter 
Yeah. That's how my fins are, with the fan off. So my Nb must be about 2-3mm closer than yours to the socket
Vegeta 2.0
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 @ 3.2GHz (400 x 8 @ 1.4v) «Lapped» DFI Lan Party UT P35 T2R BFG 8800GTS 640MB (625/1950/1400) 4GB (2 x 2GB) OCZ Platinum 1066MHz 
Hard DriveOptical DriveOSMonitor
Seagate 320GB and 160GB || Western Digital 250GB DVD-RW Vista Ultimate x64 2 x 19" Widescreens (2880x900) 
KeyboardPowerCase
Eclipse II Antec Earthwatts 500W Thermaltake Armor 
  hide details  
Reply
Vegeta 2.0
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 @ 3.2GHz (400 x 8 @ 1.4v) «Lapped» DFI Lan Party UT P35 T2R BFG 8800GTS 640MB (625/1950/1400) 4GB (2 x 2GB) OCZ Platinum 1066MHz 
Hard DriveOptical DriveOSMonitor
Seagate 320GB and 160GB || Western Digital 250GB DVD-RW Vista Ultimate x64 2 x 19" Widescreens (2880x900) 
KeyboardPowerCase
Eclipse II Antec Earthwatts 500W Thermaltake Armor 
  hide details  
Reply
post #9 of 15
the fan in my tuniq tower rested on the NB heatsink. i had to use 2 washers on each mounting screw to raise the fan off of the NB heat sink.
 
HTPC
(16 items)
 
 
CPUMotherboardGraphicsRAM
i5 2500k MSI Z77A-GD65 MSI GTX 560 Ti 16GB Corsair Vengence DDR3 1600 
Hard DriveHard DriveHard DriveHard Drive
90GB Corsair Force Series 3 Western Digital Green 1TB Samsung F3 1TB Microcenter 64GB SSD 
Optical DriveCoolingCoolingCooling
Samsung 18x SATA DVD Burner Corsair H100i 4 x Corsair AC120 fans 2 x Corsair SP120 fans 
OSOSMonitorKeyboard
Windows 8 Pro Ubuntu 12.04 19" Acer Logitech G15 
PowerCaseMouse
Corsair HX750 Corsair Carbide 500R Logitech MX518 
CPUMotherboardGraphicsRAM
AMD A6-3650 Biostar A75M Radeon 6540 G.Skill 
Hard DriveHard DriveHard DriveHard Drive
OCZ Agility 3 60GB Samsung 1.5TB WD 640GB Blue Microcenter 64GB SSD 
CoolingOSMonitorKeyboard
Stock Windows 7 32 Bit Winbook 37" HDTV Lenovo n5902a / Logitech Harmony 650 / FLiRC 
PowerCaseMouseAudio
OCZ ModXstream 700w nMediaPC 6000B  none Phillips HTS3555 
  hide details  
Reply
 
HTPC
(16 items)
 
 
CPUMotherboardGraphicsRAM
i5 2500k MSI Z77A-GD65 MSI GTX 560 Ti 16GB Corsair Vengence DDR3 1600 
Hard DriveHard DriveHard DriveHard Drive
90GB Corsair Force Series 3 Western Digital Green 1TB Samsung F3 1TB Microcenter 64GB SSD 
Optical DriveCoolingCoolingCooling
Samsung 18x SATA DVD Burner Corsair H100i 4 x Corsair AC120 fans 2 x Corsair SP120 fans 
OSOSMonitorKeyboard
Windows 8 Pro Ubuntu 12.04 19" Acer Logitech G15 
PowerCaseMouse
Corsair HX750 Corsair Carbide 500R Logitech MX518 
CPUMotherboardGraphicsRAM
AMD A6-3650 Biostar A75M Radeon 6540 G.Skill 
Hard DriveHard DriveHard DriveHard Drive
OCZ Agility 3 60GB Samsung 1.5TB WD 640GB Blue Microcenter 64GB SSD 
CoolingOSMonitorKeyboard
Stock Windows 7 32 Bit Winbook 37" HDTV Lenovo n5902a / Logitech Harmony 650 / FLiRC 
PowerCaseMouseAudio
OCZ ModXstream 700w nMediaPC 6000B  none Phillips HTS3555 
  hide details  
Reply
post #10 of 15
Quote:
Originally Posted by wigseryc View Post
If it makes a difference, my F7Pro fan frame, the black plastic bit that snaps around the edge of the fins, touches the NB heatsink ever so slightly..

Makes no difference to temps whatsoever though.
The NB on a Lt/UT looks like this btw.

The Tuniq fits well. The only issue is the fan bracket touches the NB. However that makes no difference


You need a new cpu cooler anyway. No point wasting the potential of that board due to the AC64's cooling ability.

You should have fun with that board and new cpu cooler

Fury
Revival
(17 items)
 
  
CPUMotherboardGraphicsRAM
i5 6600K 4.7GHz Gigabyte Z170XP-SLI Gigabyte G1 GTX 970 Corsair Vengence LPX 3200MHz 2x8GB 
Hard DriveHard DriveOptical DriveCooling
Samsung Evo 850 500GB Samsung F1 Spinpoint 1TB Samsung DVD-RW Corsaid H110i GT 
OSMonitorKeyboardPower
Windows 10 Lg 22" Logitech G11 SuperFlower Leadex Platinum 750W 
CaseMouseMouse PadAudio
Fractal Define R5 Midi Steelseries Rival 300 Black Steelseries QcK X-Fi XtremeMusic 
Other
Logitech G27 
  hide details  
Reply
Revival
(17 items)
 
  
CPUMotherboardGraphicsRAM
i5 6600K 4.7GHz Gigabyte Z170XP-SLI Gigabyte G1 GTX 970 Corsair Vengence LPX 3200MHz 2x8GB 
Hard DriveHard DriveOptical DriveCooling
Samsung Evo 850 500GB Samsung F1 Spinpoint 1TB Samsung DVD-RW Corsaid H110i GT 
OSMonitorKeyboardPower
Windows 10 Lg 22" Logitech G11 SuperFlower Leadex Platinum 750W 
CaseMouseMouse PadAudio
Fractal Define R5 Midi Steelseries Rival 300 Black Steelseries QcK X-Fi XtremeMusic 
Other
Logitech G27 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › DFI NB heatsink is huge!!