Overclock.net › Forums › Intel › Intel CPUs › After lapping some problems!
New Posts  All Forums:Forum Nav:

After lapping some problems! - Page 2

post #11 of 31
Quote:
Originally Posted by evazive View Post
So that is most likely the reason that the sensor is broken? That doesn't really bother me that much, but should I re-lap it on some glass?
I'm not sure it will fix a sensor problem. But it will fix that gap of light you saw with the razor blade. Be careful if you are down to the copper. Just mark an X with a felt pen (magic marker) Then relap using glass.
But if you are already down into the copper. Be careful. You don't have much to take off. Don't hold me responsible. The glass should have been used in the first place.
Anybody know how thick that copper is once you get to it?
    
CPUMotherboardGraphicsRAM
E8600@4.5+GHz 24/7 Stable Asus P5Q Pro EVGA GTX 285 - 675/1728/1269 G.Skill 1066 2 Gigs 
Hard DriveOSPowerCase
Western Digital 320GB SATA2 7200rpm 16M Kubuntu Linux 64bit Raidmax 550W RaidMax Smilodon 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
E8600@4.5+GHz 24/7 Stable Asus P5Q Pro EVGA GTX 285 - 675/1728/1269 G.Skill 1066 2 Gigs 
Hard DriveOSPowerCase
Western Digital 320GB SATA2 7200rpm 16M Kubuntu Linux 64bit Raidmax 550W RaidMax Smilodon 
  hide details  
Reply
post #12 of 31
its rather thick. i lapped my e6600 several times
Coeus
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD 940 Msi 970a-g46 2x xfx 7970 G Skill NQ PC1333 4x2 
Hard DriveOptical DriveOSMonitor
Seagate 7200.9 160gb need Windows 10 64bit Sharp 32inch 
Power
Thermaltake 1350 
  hide details  
Reply
Coeus
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD 940 Msi 970a-g46 2x xfx 7970 G Skill NQ PC1333 4x2 
Hard DriveOptical DriveOSMonitor
Seagate 7200.9 160gb need Windows 10 64bit Sharp 32inch 
Power
Thermaltake 1350 
  hide details  
Reply
post #13 of 31
Quote:
Originally Posted by whe3ls View Post
its rather thick. i lapped my e6600 several times
Excellent. Good to know. I never had to re-lap. Once it hits the copper; I just start shining it up. So evazive. Sounds like you are set man. Good luck
    
CPUMotherboardGraphicsRAM
E8600@4.5+GHz 24/7 Stable Asus P5Q Pro EVGA GTX 285 - 675/1728/1269 G.Skill 1066 2 Gigs 
Hard DriveOSPowerCase
Western Digital 320GB SATA2 7200rpm 16M Kubuntu Linux 64bit Raidmax 550W RaidMax Smilodon 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
E8600@4.5+GHz 24/7 Stable Asus P5Q Pro EVGA GTX 285 - 675/1728/1269 G.Skill 1066 2 Gigs 
Hard DriveOSPowerCase
Western Digital 320GB SATA2 7200rpm 16M Kubuntu Linux 64bit Raidmax 550W RaidMax Smilodon 
  hide details  
Reply
post #14 of 31
if it close to as think as the ihs off my celeron d 346 it well take alot of sanding to remove it. it was close to 1/8inch think
Coeus
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD 940 Msi 970a-g46 2x xfx 7970 G Skill NQ PC1333 4x2 
Hard DriveOptical DriveOSMonitor
Seagate 7200.9 160gb need Windows 10 64bit Sharp 32inch 
Power
Thermaltake 1350 
  hide details  
Reply
Coeus
(13 items)
 
  
CPUMotherboardGraphicsRAM
AMD 940 Msi 970a-g46 2x xfx 7970 G Skill NQ PC1333 4x2 
Hard DriveOptical DriveOSMonitor
Seagate 7200.9 160gb need Windows 10 64bit Sharp 32inch 
Power
Thermaltake 1350 
  hide details  
Reply
post #15 of 31
did u follow any directions or did u just go to town lapping the IHS?
My System
(13 items)
 
  
OSMonitor
Win7 Dell 37" Lcd 
  hide details  
Reply
My System
(13 items)
 
  
OSMonitor
Win7 Dell 37" Lcd 
  hide details  
Reply
post #16 of 31
Quote:
Originally Posted by evazive View Post
I am using some generic kind of grease, something my dad used for when he was a mechanic.
Like axle grease or something?

You need some Thermal Grease, which is specifically designed for thermal transference - not lubrication.
    
CPUMotherboardGraphicsRAM
Intel Q6600 G0 @ 3.6GHz (lapped) EVGA 780i SLI FTW @ 1600MHz FSB 2 x EVGA 8800GTX 768MB (SLI) @ 625/1500/2000MHz 2x2GB G.Skill PC2-8000 PQ @ 800MHz (linked to FSB) 
Hard DriveOptical DriveOSMonitor
2x160GB WD RAID 0, 750GB Samsung Spinpoint F1 LITE-ON 20X SATA DVD/CD RW Windows 7 Ultimate x64 Viewsonic VA2702w 27" LCD 1920x1080 
KeyboardPowerCaseMouse
Logitech Value 100 (beer magnet) Corsair TX 750W Cooler Master ATCS 840 Logitech SBF-90 (cheapest one on Newegg) 
Mouse Pad
Some kinda rubber thing (beer magnet) 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Q6600 G0 @ 3.6GHz (lapped) EVGA 780i SLI FTW @ 1600MHz FSB 2 x EVGA 8800GTX 768MB (SLI) @ 625/1500/2000MHz 2x2GB G.Skill PC2-8000 PQ @ 800MHz (linked to FSB) 
Hard DriveOptical DriveOSMonitor
2x160GB WD RAID 0, 750GB Samsung Spinpoint F1 LITE-ON 20X SATA DVD/CD RW Windows 7 Ultimate x64 Viewsonic VA2702w 27" LCD 1920x1080 
KeyboardPowerCaseMouse
Logitech Value 100 (beer magnet) Corsair TX 750W Cooler Master ATCS 840 Logitech SBF-90 (cheapest one on Newegg) 
Mouse Pad
Some kinda rubber thing (beer magnet) 
  hide details  
Reply
post #17 of 31
Crisco is NOT an option here.
Navi 2.1
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600K GIGABYTE GA-Z68XP-UD3  MSI GTX 970 GAMING 4G Ripjaw DDR3 
Hard DriveOptical DriveCoolingOS
Intel 80Gb SSD+1TB+243Gb Sony Blu-ray drive Corsair H100 +140mm X2 120mm X3 (two intake) Windows 7 64-Bit 
MonitorKeyboardPowerCase
HP 27" 2560X1440 DAS Keyboard Mechanical 600w Thermaltake LIAN LI PC-B25F Black Aluminum ATX Mid Tower  
MouseMouse PadAudio
Razer Deathadder Steelseries mouse mat Klipsch Promedia 2.1 
  hide details  
Reply
Navi 2.1
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600K GIGABYTE GA-Z68XP-UD3  MSI GTX 970 GAMING 4G Ripjaw DDR3 
Hard DriveOptical DriveCoolingOS
Intel 80Gb SSD+1TB+243Gb Sony Blu-ray drive Corsair H100 +140mm X2 120mm X3 (two intake) Windows 7 64-Bit 
MonitorKeyboardPowerCase
HP 27" 2560X1440 DAS Keyboard Mechanical 600w Thermaltake LIAN LI PC-B25F Black Aluminum ATX Mid Tower  
MouseMouse PadAudio
Razer Deathadder Steelseries mouse mat Klipsch Promedia 2.1 
  hide details  
Reply
post #18 of 31
Thread Starter 
Electrical grease? Lol.

And, no I did not just go and start lapping. I read a guide and just figured a flat metal 1/4 inch thick plate would do, I guess not. I have a picture frame that has some thick glass in it, I will be using that. Thanks for the quick replies. I will try getting some Arctic Silver MX-2 soon

Oh, and, TEEHEE, I love overclocking!
Logix
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Conroe E6750 1.52v @ 3.8 GHz eVGA 680i LT SLI (vdroop mod) eVGA 8800GT G.Skill 2x1GB DDR2 @ 950 MHz 
Hard DriveOSKeyboardCase
Western Digital 160 GB Windows XP Silitek Standard USB Keyboard Lian-Li PC-65B 
MouseMouse Pad
Logitech MX518 SteelSeries QCK Heavy 
  hide details  
Reply
Logix
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Conroe E6750 1.52v @ 3.8 GHz eVGA 680i LT SLI (vdroop mod) eVGA 8800GT G.Skill 2x1GB DDR2 @ 950 MHz 
Hard DriveOSKeyboardCase
Western Digital 160 GB Windows XP Silitek Standard USB Keyboard Lian-Li PC-65B 
MouseMouse Pad
Logitech MX518 SteelSeries QCK Heavy 
  hide details  
Reply
post #19 of 31
The IHS is roughly the thickness of 3 penny's give or take. I use oil "3in1" to be specific when I lap. ALWAYS use glass,It's perfectly flat.
Master Control
(12 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX-6300 Six-Core  GIGABYTE GA-970A-DS3P AMD Radeon 480 Red Dragon  Team Vulcan  
RAMHard DriveOSMonitor
Team Vulcan  Muskin Reactor 2.5 SSD Windows 10 64bit Acer H233H 1920x1080 
KeyboardPowerMouseMouse Pad
Microsoft Pro PC Power & Cooling 750W Microsoft Pro old and busted 
  hide details  
Reply
Master Control
(12 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX-6300 Six-Core  GIGABYTE GA-970A-DS3P AMD Radeon 480 Red Dragon  Team Vulcan  
RAMHard DriveOSMonitor
Team Vulcan  Muskin Reactor 2.5 SSD Windows 10 64bit Acer H233H 1920x1080 
KeyboardPowerMouseMouse Pad
Microsoft Pro PC Power & Cooling 750W Microsoft Pro old and busted 
  hide details  
Reply
post #20 of 31
Thread Starter 
I didn't even apply the grease after re-lapping it. I am getting about 3-4C cooler temperatures after re-lapping and this time I don't even have the grease. I am definitely getting me some AS MX-2.
Logix
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Conroe E6750 1.52v @ 3.8 GHz eVGA 680i LT SLI (vdroop mod) eVGA 8800GT G.Skill 2x1GB DDR2 @ 950 MHz 
Hard DriveOSKeyboardCase
Western Digital 160 GB Windows XP Silitek Standard USB Keyboard Lian-Li PC-65B 
MouseMouse Pad
Logitech MX518 SteelSeries QCK Heavy 
  hide details  
Reply
Logix
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Conroe E6750 1.52v @ 3.8 GHz eVGA 680i LT SLI (vdroop mod) eVGA 8800GT G.Skill 2x1GB DDR2 @ 950 MHz 
Hard DriveOSKeyboardCase
Western Digital 160 GB Windows XP Silitek Standard USB Keyboard Lian-Li PC-65B 
MouseMouse Pad
Logitech MX518 SteelSeries QCK Heavy 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › After lapping some problems!