Overclock.net › Forums › AMD › AMD Motherboards › [Official] ASUS M2N-SLI and M2N32-SLI Club!
New Posts  All Forums:Forum Nav:

[Official] ASUS M2N-SLI and M2N32-SLI Club! - Page 1020

post #10191 of 11303
5/17/12 at 1:01am
Thx Gyro, the update now lets me boot in normal time.

However it seems to have caused more problems really. On first boot I got blue screen post windows logo. Next 2 boots my screen just got messed up on desktop. I changed bios settings for cpu again to 1.35v and 17x after that booted in safe mode and was ok, then booted normally and now everything works. So it took me a few tries and all this time I had to press power on button/reset a few times as it kept idling.

Not sure what to do now - revert to 5001 and live with long boots or just buy a new am3 socket MB.
Reply
Reply

Gear mentioned in this thread:

post #10192 of 11303
5/17/12 at 7:59am
Quote:
Originally Posted by Slawko View Post

Gyro - Hey thanks for the reply. The funnu thing is that on the default bios settings it sets the cpu multipliers to x4 and its impossible to change that.
The only way I can modify multipliers up to x15 is to set the CPU in BIOS to manual cfg and then in bios set the bus to 200 and the multiplier to x15.
However I tried yesterday to set the voltage in BIOS to 1.3V dont know if thats correct but it was stable .... for an hour mad.gif

Is there any strict value that this CPU should be set on? The cpu voltage ... cpu-z is showing me that it runs 1.37 but i remember my setup in bios to 1.3


And also one question about the mobo itself - do you guys and girls use Asus wi-fi ap solo? where can i get the drivers? the ones from cd do not support vista/win7

Cheers biggrin.gif

Are you using nvtools or PMT?
If so remove them,and use bios only.
Setting cpu to 1.35v,refclock to 200,multi to x15,should work.Check/set ram timings and volts manually also.
i don't/haven't used the wifi,but I found this possible solution(post #5) http://www.tomshardware.com/forum/1649-63-find-wireless-driver-asus-m2n32-deluxe-wifi

Good luck


Quote:
Originally Posted by venom1stas View Post

Thx Gyro, the update now lets me boot in normal time.

However it seems to have caused more problems really. On first boot I got blue screen post windows logo. Next 2 boots my screen just got messed up on desktop. I changed bios settings for cpu again to 1.35v and 17x after that booted in safe mode and was ok, then booted normally and now everything works. So it took me a few tries and all this time I had to press power on button/reset a few times as it kept idling.

Not sure what to do now - revert to 5001 and live with long boots or just buy a new am3 socket MB.

Try clearing cmos,setup bios and start fresh PMT setup with bios1103.

Good luck

Gyro
My System
(14 items)
  		  
CPUMotherboardGraphicsGraphics
AMD Ph IIx4 955 @ 3.2 Asus M2N32-sli dlx Asus GTX 460 1gb DirectCU MSI GTX 460 1gb Cyclone 
RAMHard DriveOptical DriveOS
2x2gb OCZ ddr2 1066 plats seagate 320gb sata lg supermulti dvd WIN 7 64 
MonitorKeyboardPowerCase
acer p221w ms SS ST75F-P 750w CM 690modded w/KazeMaster pro 
Mouse
ms intellimouse explorer3.0 
View all
  hide details  
Reply
My System
(14 items)
  		  
CPUMotherboardGraphicsGraphics
AMD Ph IIx4 955 @ 3.2 Asus M2N32-sli dlx Asus GTX 460 1gb DirectCU MSI GTX 460 1gb Cyclone 
RAMHard DriveOptical DriveOS
2x2gb OCZ ddr2 1066 plats seagate 320gb sata lg supermulti dvd WIN 7 64 
MonitorKeyboardPowerCase
acer p221w ms SS ST75F-P 750w CM 690modded w/KazeMaster pro 
Mouse
ms intellimouse explorer3.0 
View all
  hide details  
Reply
post #10193 of 11303
5/17/12 at 8:59pm
Just got the 955 in the mail and the hyper 212+. I'll will test them tomorrow. Which bios should I flash to? 5002? My gfx card is getting real old as well and I might want to upgrade it. I have the Nvidia 7950 gt oc.
Reply
Reply
post #10194 of 11303
5/18/12 at 4:46am
Quote:
Originally Posted by verkurt View Post

Just got the 955 in the mail and the hyper 212+. I'll will test them tomorrow. Which bios should I flash to? 5002? My gfx card is getting real old as well and I might want to upgrade it. I have the Nvidia 7950 gt oc.

Yes 5002.
Is your present bios the original bios when the board was new?
Depending how old your present bios is,the 955 may/maynot boot.
Do you have access to another AM2 cpu that you could borrow to flash with?

What is your budget for a gfx card?
If you plan to use the nvtools an nvidia card will work best(Sometimes the nvidia mb drivers and ATI drivers don't play nice together),if using PMT either nvidia or ATI will work.

Good luck

Gyro
My System
(14 items)
  		  
CPUMotherboardGraphicsGraphics
AMD Ph IIx4 955 @ 3.2 Asus M2N32-sli dlx Asus GTX 460 1gb DirectCU MSI GTX 460 1gb Cyclone 
RAMHard DriveOptical DriveOS
2x2gb OCZ ddr2 1066 plats seagate 320gb sata lg supermulti dvd WIN 7 64 
MonitorKeyboardPowerCase
acer p221w ms SS ST75F-P 750w CM 690modded w/KazeMaster pro 
Mouse
ms intellimouse explorer3.0 
View all
  hide details  
Reply
My System
(14 items)
  		  
CPUMotherboardGraphicsGraphics
AMD Ph IIx4 955 @ 3.2 Asus M2N32-sli dlx Asus GTX 460 1gb DirectCU MSI GTX 460 1gb Cyclone 
RAMHard DriveOptical DriveOS
2x2gb OCZ ddr2 1066 plats seagate 320gb sata lg supermulti dvd WIN 7 64 
MonitorKeyboardPowerCase
acer p221w ms SS ST75F-P 750w CM 690modded w/KazeMaster pro 
Mouse
ms intellimouse explorer3.0 
View all
  hide details  
Reply
post #10195 of 11303
5/18/12 at 10:50am
Quote:
Originally Posted by Gyro View Post

Yes 5002.
Is your present bios the original bios when the board was new?
Depending how old your present bios is,the 955 may/maynot boot.
Do you have access to another AM2 cpu that you could borrow to flash with?
What is your budget for a gfx card?
If you plan to use the nvtools an nvidia card will work best(Sometimes the nvidia mb drivers and ATI drivers don't play nice together),if using PMT either nvidia or ATI will work.
Good luck
Gyro

I may have upgraded before it died. I honestly cannot remember. If I didin't I think that I have an older cpu that I got before the 5200+ that I can use to boot up the computer and download the 5002 bios.

I was thinking of getting an hd 6870. Ive seena couple on ebay for around $120. I was thinking of using PMT instead of Nvidia tools.
Reply
Reply
post #10196 of 11303
5/18/12 at 10:59am
just wondering what you guys think about my memory timings of 5-4-4-5-15 at 1.9v if thats good? I'm sorta stuck at at cas 5 and T2 with my 2 oem sticks sonic.gif

http://valid.canardpc.com/show_oc.php?id=2374047
Dust Collector
(16 items)
  		  
CPUMotherboardGraphicsRAM
AMD Phenom II X4 965 4.0 Ghz (HDZ965FBK4DGM) ASUS M2N32 SLI-Deluxe SPARKLE Calibre Series GeForce GTX 580 2x2gb gskill F2-6400CL5D-4GBPQ 
RAMHard DriveHard DriveOptical Drive
2x2gb micron tech 16HTF25664AY-1GAE1 westdigital black WDC WD5001AALS-00E3A (465 GB) samsung f3r HE103SJ (931 GB) TSSTcorp CD/DVDW SH-S183L 
CoolingOSMonitorKeyboard
Noctua NH-D14 Microshaft Winblows 7.2 x64 (Daz) 19inch Acer AL1916 compaq 
PowerCaseMouseAudio
coolermaster silentpro 700w antec 1200 logitech onboard 
View all
  hide details  
Reply
Dust Collector
(16 items)
  		  
CPUMotherboardGraphicsRAM
AMD Phenom II X4 965 4.0 Ghz (HDZ965FBK4DGM) ASUS M2N32 SLI-Deluxe SPARKLE Calibre Series GeForce GTX 580 2x2gb gskill F2-6400CL5D-4GBPQ 
RAMHard DriveHard DriveOptical Drive
2x2gb micron tech 16HTF25664AY-1GAE1 westdigital black WDC WD5001AALS-00E3A (465 GB) samsung f3r HE103SJ (931 GB) TSSTcorp CD/DVDW SH-S183L 
CoolingOSMonitorKeyboard
Noctua NH-D14 Microshaft Winblows 7.2 x64 (Daz) 19inch Acer AL1916 compaq 
PowerCaseMouseAudio
coolermaster silentpro 700w antec 1200 logitech onboard 
View all
  hide details  
Reply
post #10197 of 11303
5/18/12 at 11:30am
Quote:
Originally Posted by verkurt View Post


I may have upgraded before it died. I honestly cannot remember. If I didin't I think that I have an older cpu that I got before the 5200+ that I can use to boot up the computer and download the 5002 bios.

I was thinking of getting an hd 6870. Ive seena couple on ebay for around $120. I was thinking of using PMT instead of Nvidia tools.

You should be good then.

Quote:
Originally Posted by ozlay View Post

just wondering what you guys think about my memory timings of 5-4-4-5-15 at 1.9v if thats good? I'm sorta stuck at at cas 5 and T2 with my 2 oem sticks sonic.gif

http://valid.canardpc.com/show_oc.php?id=2374047

you won't get much better than that running the mixture of ram you are.
If you plan to upgrade either the cpu or gfx card then you can maybe get a matching set to the g skill's.


Gyro
My System
(14 items)
  		  
CPUMotherboardGraphicsGraphics
AMD Ph IIx4 955 @ 3.2 Asus M2N32-sli dlx Asus GTX 460 1gb DirectCU MSI GTX 460 1gb Cyclone 
RAMHard DriveOptical DriveOS
2x2gb OCZ ddr2 1066 plats seagate 320gb sata lg supermulti dvd WIN 7 64 
MonitorKeyboardPowerCase
acer p221w ms SS ST75F-P 750w CM 690modded w/KazeMaster pro 
Mouse
ms intellimouse explorer3.0 
View all
  hide details  
Reply
My System
(14 items)
  		  
CPUMotherboardGraphicsGraphics
AMD Ph IIx4 955 @ 3.2 Asus M2N32-sli dlx Asus GTX 460 1gb DirectCU MSI GTX 460 1gb Cyclone 
RAMHard DriveOptical DriveOS
2x2gb OCZ ddr2 1066 plats seagate 320gb sata lg supermulti dvd WIN 7 64 
MonitorKeyboardPowerCase
acer p221w ms SS ST75F-P 750w CM 690modded w/KazeMaster pro 
Mouse
ms intellimouse explorer3.0 
View all
  hide details  
Reply
post #10198 of 11303
5/18/12 at 3:05pm
Ok I got the clock finally correct! CPU Z is reading at 3413Mhz ish. Now my problem is stability. When my computer starts up it gets past the POSt screen and then just hangs at a black screen with a blinking light on my monitor. Do you think I should try flashing my BIOS to the newest 5002 version? Or maybe adjust some voltage setting? My VCore is running at 1.376 and everything else is default.

Thanks so much for your help!
Reply
Reply
post #10199 of 11303
5/18/12 at 3:32pm
So you can see and enter/use the bios,but windows does not start?
Check the HDD connections.
Once your up and running good,then you can update the bios to 5002.
But 2209 should work also.

Good luck

Gyro
My System
(14 items)
  		  
CPUMotherboardGraphicsGraphics
AMD Ph IIx4 955 @ 3.2 Asus M2N32-sli dlx Asus GTX 460 1gb DirectCU MSI GTX 460 1gb Cyclone 
RAMHard DriveOptical DriveOS
2x2gb OCZ ddr2 1066 plats seagate 320gb sata lg supermulti dvd WIN 7 64 
MonitorKeyboardPowerCase
acer p221w ms SS ST75F-P 750w CM 690modded w/KazeMaster pro 
Mouse
ms intellimouse explorer3.0 
View all
  hide details  
Reply
My System
(14 items)
  		  
CPUMotherboardGraphicsGraphics
AMD Ph IIx4 955 @ 3.2 Asus M2N32-sli dlx Asus GTX 460 1gb DirectCU MSI GTX 460 1gb Cyclone 
RAMHard DriveOptical DriveOS
2x2gb OCZ ddr2 1066 plats seagate 320gb sata lg supermulti dvd WIN 7 64 
MonitorKeyboardPowerCase
acer p221w ms SS ST75F-P 750w CM 690modded w/KazeMaster pro 
Mouse
ms intellimouse explorer3.0 
View all
  hide details  
Reply
post #10200 of 11303
5/18/12 at 9:31pm
Just got everything hooked up and ready to go. I fired up the computer and I got 1 long 3 short beeps. A google search tells me that I have a Graphics card issue. I cleaned the card and resat it and still got the beeps. Lame. I guess i'll be getting that 6870 early than I thought. The card powers on and the fan spins on the card, but I guess something else is wrong with it.
Reply
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD Motherboards

Gear mentioned in this thread:

Overclock.net › Forums › AMD › AMD Motherboards › [Official] ASUS M2N-SLI and M2N32-SLI Club!