Overclock.net › Forums › AMD › AMD Motherboards › [Official] ASUS M2N-SLI and M2N32-SLI Club!
New Posts  All Forums:Forum Nav:

[Official] ASUS M2N-SLI and M2N32-SLI Club! - Page 1070

post #10691 of 12349
Quote:
Originally Posted by Gyro View Post

Auto cpu volts in bios worked for me with PMT.
MCP is the chipset temp,so putting the fan on helped quite a bit.thumb.gif
Run a bench on the ram(super pi 1m and/or maxxmem) and see how much improvement over just multi oc.
Check out ej52's M2Ntweaker mentioned in the post above.
Gyro

I would try to compare vs multi OC, but I dont have an unlocked multi so i can get above 3.2 on multi only. redface.gif

I may try M2Ntweaker later.
Pre OCN build
(16 items)
 
  
CPUMotherboardGraphicsRAM
phenom ii B97 ECS A970M-A AM3+ EVGA GXT 460 2x4gb adata 
Hard DriveHard DriveHard DriveHard Drive
OCZ Vertex 4 Samsung F3 1TB Samsung f3 1tb Samsung HD155UI 
Optical DriveOSMonitorPower
Super Writemaster DVDr Windows 7 Samsung Syncmaster Antec Basiq power 550 + 
Case
Bitfenix Raider 
  hide details  
Reply
Pre OCN build
(16 items)
 
  
CPUMotherboardGraphicsRAM
phenom ii B97 ECS A970M-A AM3+ EVGA GXT 460 2x4gb adata 
Hard DriveHard DriveHard DriveHard Drive
OCZ Vertex 4 Samsung F3 1TB Samsung f3 1tb Samsung HD155UI 
Optical DriveOSMonitorPower
Super Writemaster DVDr Windows 7 Samsung Syncmaster Antec Basiq power 550 + 
Case
Bitfenix Raider 
  hide details  
Reply
post #10692 of 12349
Quote:
Originally Posted by LuckySe7ens View Post

My 240x15 run went for 7 hours solid. That's good enough for me.

it runs solid on 253x15 for me and I'm sure for u it will aswell, but with my high mobo temps I had to resort to 240x15. say how is your mobo temps when you play a game?? cuz thats when it really starts to get hot.
post #10693 of 12349
Quote:
Originally Posted by ej52 View Post

Don't know if any1 has tried it yet as no1 has said anything bout it .... but here
is a updated version with a few minor tweaks wink.gif
M2N Tweaker v1.0.1
SetupM2NTweaker_v1.0.1.zip 140k .zip file
Changes:
Sets the P-State at Boot up + Wakeup (out of stand by)
Now supports the following Motherboards, with any bios version that supports AM3.
M2N-E, M2N-SLI, M2N-SLI DELUXE, M2N32-SLI DELUXE, M2N32-SLI PREMIUM
I am working on adding a option to set the FSB from M2N Tweaker as well however
documentation (datasheets) on the nforce sb/nb are not easy to get hold of frown.gif
Works like a charm! Removed PMT (to adjust clock speed) and Power Trigger (to set clock speed after sleep mode) and installed this one, it's awesome, nice work.

Add this program to the first page because it works good and it is needed in mainly for ATI users, thanks man!
post #10694 of 12349
Quote:
Originally Posted by nuke777 View Post

it runs solid on 253x15 for me and I'm sure for u it will aswell, but with my high mobo temps I had to resort to 240x15. say how is your mobo temps when you play a game?? cuz thats when it really starts to get hot.

You have the m2n32 sli dlx or just the m2n sli dlx? The board without the 32 (mine) doesn't have as good vrms or clock quite as high.
Pre OCN build
(16 items)
 
  
CPUMotherboardGraphicsRAM
phenom ii B97 ECS A970M-A AM3+ EVGA GXT 460 2x4gb adata 
Hard DriveHard DriveHard DriveHard Drive
OCZ Vertex 4 Samsung F3 1TB Samsung f3 1tb Samsung HD155UI 
Optical DriveOSMonitorPower
Super Writemaster DVDr Windows 7 Samsung Syncmaster Antec Basiq power 550 + 
Case
Bitfenix Raider 
  hide details  
Reply
Pre OCN build
(16 items)
 
  
CPUMotherboardGraphicsRAM
phenom ii B97 ECS A970M-A AM3+ EVGA GXT 460 2x4gb adata 
Hard DriveHard DriveHard DriveHard Drive
OCZ Vertex 4 Samsung F3 1TB Samsung f3 1tb Samsung HD155UI 
Optical DriveOSMonitorPower
Super Writemaster DVDr Windows 7 Samsung Syncmaster Antec Basiq power 550 + 
Case
Bitfenix Raider 
  hide details  
Reply
post #10695 of 12349
Quote:
Originally Posted by LuckySe7ens View Post

You have the m2n32 sli dlx or just the m2n sli dlx? The board without the 32 (mine) doesn't have as good vrms or clock quite as high.

mine is just m2n sli dlx as well. what do you mean not good vrms and not a high clock??
post #10696 of 12349
Quote:
Originally Posted by nuke777 View Post

mine is just m2n sli dlx as well. what do you mean not good vrms and not a high clock??

This is the reason why all of the validated quad cores on the non 32's are @ 3.6ghz or less, whereas there are several m2n32's running 4ghz with those chips.

I can get over 4ghz in windows without load, but I cannot stabilize it @ load without errors or crashes for this reason AFAIK

Edit: Alright, figured id give it a shot for shats and gaggles: running 250x15 now. BIOS voltage is at 1.55v devil.gif and i finally got the in windows voltage to come up above 1.4v! @ idle anyways. under load its showing 1.396v still... Anyhow its running @ 3.75ghz atm on Prime

Getting this AM3 chip is the most fun Ive had with this rig in a long time tongue.gif

CPU temp is high on this crummy cooler though. 56* Ah well it only cost me $3...
Edited by LuckySe7ens - 9/22/12 at 12:42pm
Pre OCN build
(16 items)
 
  
CPUMotherboardGraphicsRAM
phenom ii B97 ECS A970M-A AM3+ EVGA GXT 460 2x4gb adata 
Hard DriveHard DriveHard DriveHard Drive
OCZ Vertex 4 Samsung F3 1TB Samsung f3 1tb Samsung HD155UI 
Optical DriveOSMonitorPower
Super Writemaster DVDr Windows 7 Samsung Syncmaster Antec Basiq power 550 + 
Case
Bitfenix Raider 
  hide details  
Reply
Pre OCN build
(16 items)
 
  
CPUMotherboardGraphicsRAM
phenom ii B97 ECS A970M-A AM3+ EVGA GXT 460 2x4gb adata 
Hard DriveHard DriveHard DriveHard Drive
OCZ Vertex 4 Samsung F3 1TB Samsung f3 1tb Samsung HD155UI 
Optical DriveOSMonitorPower
Super Writemaster DVDr Windows 7 Samsung Syncmaster Antec Basiq power 550 + 
Case
Bitfenix Raider 
  hide details  
Reply
post #10697 of 12349
Quote:
Originally Posted by nuke777 View Post

it runs solid on 253x15 for me and I'm sure for u it will aswell, but with my high mobo temps I had to resort to 240x15. say how is your mobo temps when you play a game?? cuz thats when it really starts to get hot.

I don't really game. I loaded up skyrim just to see and the MCP temps which is the only motherboard temp sensor that i really seem to have @ 3.6ghz is much lower even than in prime. Im sure this is b/c im running it open sided currently and I'm not getting heat buildup in my case from my gpus like you may be. Does your gpu exhaust externally? Both of mine do, which probably helps.

Find a way to attach a fan to your vrm heatsink area. It seems to make a huge difference in my case, since i have a tower style cooler that does not direct air @ my vrms at all. @ Full load the highest MCP temp im seeing @ 3.75gh atm is 80*C.
Pre OCN build
(16 items)
 
  
CPUMotherboardGraphicsRAM
phenom ii B97 ECS A970M-A AM3+ EVGA GXT 460 2x4gb adata 
Hard DriveHard DriveHard DriveHard Drive
OCZ Vertex 4 Samsung F3 1TB Samsung f3 1tb Samsung HD155UI 
Optical DriveOSMonitorPower
Super Writemaster DVDr Windows 7 Samsung Syncmaster Antec Basiq power 550 + 
Case
Bitfenix Raider 
  hide details  
Reply
Pre OCN build
(16 items)
 
  
CPUMotherboardGraphicsRAM
phenom ii B97 ECS A970M-A AM3+ EVGA GXT 460 2x4gb adata 
Hard DriveHard DriveHard DriveHard Drive
OCZ Vertex 4 Samsung F3 1TB Samsung f3 1tb Samsung HD155UI 
Optical DriveOSMonitorPower
Super Writemaster DVDr Windows 7 Samsung Syncmaster Antec Basiq power 550 + 
Case
Bitfenix Raider 
  hide details  
Reply
post #10698 of 12349
@Barktoothx & FunGt

Thx guys!

Will think bout adding the power saving.

New Version .... M2N Tweaker v1.0.2 tongue.gif

SetupM2NTweaker_v1.0.2.zip 142k .zip file

Changes:

1. Now supports all AMD K10 CPU's (Phenom, Phenom II, Athlon II).
2. You can now change the HT Link multiplier.
3. Gives readings for CPU, MEM, HT and NB frequencies.
4. Minor GUI changes.

Enjoy wink.gif
Edited by ej52 - 9/22/12 at 2:20pm
PwNaGe ;)
(15 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II 970 @ 4GHz Asus M2N32-SLI Deluxe XFX 9600GT sli'd @ 800/1100 8GB XMS2 @ 900Mhz 5-5-5-15 2T 
Hard DriveHard DriveOptical DriveCooling
500GB Baracuda 2T Baracuda External LG WriteMaster Corsair H80 
OSMonitorPowerCase
Win 7 Ultimate 64 19" LG Flatron M1994D OCZ 600W GameXStream Antec 900 
  hide details  
Reply
PwNaGe ;)
(15 items)
 
  
CPUMotherboardGraphicsRAM
Phenom II 970 @ 4GHz Asus M2N32-SLI Deluxe XFX 9600GT sli'd @ 800/1100 8GB XMS2 @ 900Mhz 5-5-5-15 2T 
Hard DriveHard DriveOptical DriveCooling
500GB Baracuda 2T Baracuda External LG WriteMaster Corsair H80 
OSMonitorPowerCase
Win 7 Ultimate 64 19" LG Flatron M1994D OCZ 600W GameXStream Antec 900 
  hide details  
Reply
post #10699 of 12349
Quote:
Originally Posted by LuckySe7ens View Post

This is the reason why all of the validated quad cores on the non 32's are @ 3.6ghz or less, whereas there are several m2n32's running 4ghz with those chips.
I can get over 4ghz in windows without load, but I cannot stabilize it @ load without errors or crashes for this reason AFAIK
Edit: Alright, figured id give it a shot for shats and gaggles: running 250x15 now. BIOS voltage is at 1.55v devil.gif and i finally got the in windows voltage to come up above 1.4v! @ idle anyways. under load its showing 1.396v still... Anyhow its running @ 3.75ghz atm on Prime
Getting this AM3 chip is the most fun Ive had with this rig in a long time tongue.gif
CPU temp is high on this crummy cooler though. 56* Ah well it only cost me $3...

I was running for few weeks at 253x15 with a cpu at 1.43v and it was running smoothly not a single crash or error, that is ofcourse before I notised the mobo temps frown.gif .my highest cpu temp was 52c (after market cooler).
Quote:
Originally Posted by LuckySe7ens View Post

I don't really game. I loaded up skyrim just to see and the MCP temps which is the only motherboard temp sensor that i really seem to have @ 3.6ghz is much lower even than in prime. Im sure this is b/c im running it open sided currently and I'm not getting heat buildup in my case from my gpus like you may be. Does your gpu exhaust externally? Both of mine do, which probably helps.
Find a way to attach a fan to your vrm heatsink area. It seems to make a huge difference in my case, since i have a tower style cooler that does not direct air @ my vrms at all. @ Full load the highest MCP temp im seeing @ 3.75gh atm is 80*C.

yeh my gpu is exhusting to outside.

that is strange that on your m2n sli dlx you get MCP temp but not mobo temps where is mine shows mobo temp instead of MCP temp.
also correct me if I'm wrong but 80c is pretty damn high. unfortunaly I cant put any fan on top of the mobo chip to cool it since directly above it is my gpu.
Edited by nuke777 - 9/22/12 at 5:44pm
post #10700 of 12349
Quote:
Originally Posted by nuke777 View Post

I was running for few weeks at 253x15 with a cpu at 1.43v and it was running smoothly not a single crash or error, that is ofcourse before I notised the mobo temps frown.gif .my highest cpu temp was 52c (after market cooler).
yeh my gpu is exhusting to outside.
that is strange that on your m2n sli dlx you get MCP temp but not mobo temps where is mine shows mobo temp instead of MCP temp.
also correct me if I'm wrong but 80c is pretty damn high. unfortunaly I cant put any fan on top of the mobo chip to cool it since directly above it is my gpu.

Your thinking of the SB area, the spot between the cpu cooler and your I\o and exhaust fan is really where VRMs are and where the extra cooling needs to be.

Also FWIW im running a 92mm Coolermaster TX3 (rebranded rocketfish version) with some 5 year old TIM. Not the best setup, but it works.

I either eventually hit my thermal threshold or ram is unstable b/c im not getting 250x15 stable in prime blend. Crashed a few hours in. That being said im sure it'd be game stable... I may loosen timings, im sure that my mixed ram isnt helping matters any.
Pre OCN build
(16 items)
 
  
CPUMotherboardGraphicsRAM
phenom ii B97 ECS A970M-A AM3+ EVGA GXT 460 2x4gb adata 
Hard DriveHard DriveHard DriveHard Drive
OCZ Vertex 4 Samsung F3 1TB Samsung f3 1tb Samsung HD155UI 
Optical DriveOSMonitorPower
Super Writemaster DVDr Windows 7 Samsung Syncmaster Antec Basiq power 550 + 
Case
Bitfenix Raider 
  hide details  
Reply
Pre OCN build
(16 items)
 
  
CPUMotherboardGraphicsRAM
phenom ii B97 ECS A970M-A AM3+ EVGA GXT 460 2x4gb adata 
Hard DriveHard DriveHard DriveHard Drive
OCZ Vertex 4 Samsung F3 1TB Samsung f3 1tb Samsung HD155UI 
Optical DriveOSMonitorPower
Super Writemaster DVDr Windows 7 Samsung Syncmaster Antec Basiq power 550 + 
Case
Bitfenix Raider 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD Motherboards
Overclock.net › Forums › AMD › AMD Motherboards › [Official] ASUS M2N-SLI and M2N32-SLI Club!