Overclock.net › Forums › AMD › AMD Motherboards › [Official] ASUS M2N-SLI and M2N32-SLI Club!
New Posts  All Forums:Forum Nav:

[Official] ASUS M2N-SLI and M2N32-SLI Club! - Page 682

post #6811 of 12343
Verto writes:
> edit again: so i got it to work. i disabled pretty much everything in bios, and
> then took out my second video card. it worked.

Did it work before you took out the extra gfx card, but after you'd done all
the BIOS disabling? How odd, why would having a 2nd gfx card lock down
the HT multiplier...

Ian.
    
CPUMotherboardGraphicsRAM
5GHz i7 2700K ASUS Maximus IV Extreme (P67) EVGA GTX 980 4GB Superclocked ACX 2.0 16GB (2 x 8) GSkill TridentX DDR3/2400 running ... 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 850 Pro 256GB OCZ Vertex4 256GB Samsung Spintpoint F3 1TB LG 22X DVDRW (Model GH22NP20) 
CoolingCoolingCoolingCooling
Corsair H80 CPU Watercooler with two Nanoxia De... Nanoxia Deep Silence 140mm PWM 2x Nanoxia Deep Silence 120mm Nanoxia Deep Silence 120mm PWM 
CoolingCoolingOSMonitor
Arctic F8 2x Evercool 40x40x10mm chipset fans Windows 7 Professional 64bit + Autopatcher HP LP2475W HIPS 1920x1200 24" 
KeyboardPowerCaseMouse
Cyborg V7 USB Thermaltake Toughpower 1000W Modular Antec 300 A4Tech Laser Mouse USB 
Mouse PadAudioOtherOther
SGI Onboard. Thrustmaster T-16000M Joystick CH Pro Throttle 
OtherOtherOther
Logitech G13 Gamepad Corsair H2100 Gaming Headset and Mic 2x Lepai TA-2020-A Mini Power Amps. 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
5GHz i7 2700K ASUS Maximus IV Extreme (P67) EVGA GTX 980 4GB Superclocked ACX 2.0 16GB (2 x 8) GSkill TridentX DDR3/2400 running ... 
Hard DriveHard DriveHard DriveOptical Drive
Samsung 850 Pro 256GB OCZ Vertex4 256GB Samsung Spintpoint F3 1TB LG 22X DVDRW (Model GH22NP20) 
CoolingCoolingCoolingCooling
Corsair H80 CPU Watercooler with two Nanoxia De... Nanoxia Deep Silence 140mm PWM 2x Nanoxia Deep Silence 120mm Nanoxia Deep Silence 120mm PWM 
CoolingCoolingOSMonitor
Arctic F8 2x Evercool 40x40x10mm chipset fans Windows 7 Professional 64bit + Autopatcher HP LP2475W HIPS 1920x1200 24" 
KeyboardPowerCaseMouse
Cyborg V7 USB Thermaltake Toughpower 1000W Modular Antec 300 A4Tech Laser Mouse USB 
Mouse PadAudioOtherOther
SGI Onboard. Thrustmaster T-16000M Joystick CH Pro Throttle 
OtherOtherOther
Logitech G13 Gamepad Corsair H2100 Gaming Headset and Mic 2x Lepai TA-2020-A Mini Power Amps. 
  hide details  
Reply
post #6812 of 12343
i'm not sure. i want to say no. i've tried everything pretty much.

i've had it working twice now, both times with only 1 gfx card. each time i go to put the other back in and reboot it gets screwed again.

im not sure if it is the gfx cards or if it is something to do with my reboot sequences. i saved the one bios settings that worked and reloaded them and it still didn't work again with 1 card. seems to be a very weird bug.
post #6813 of 12343
Quote:
Originally Posted by Verto View Post
i'm not sure. i want to say no. i've tried everything pretty much.

i've had it working twice now, both times with only 1 gfx card. each time i go to put the other back in and reboot it gets screwed again.

im not sure if it is the gfx cards or if it is something to do with my reboot sequences. i saved the one bios settings that worked and reloaded them and it still didn't work again with 1 card. seems to be a very weird bug.
Have you updated the mb chipset drivers for Win 7?

Go here http://www.nvidia.com/object/nforce_...bit_15.53.html to get them.

Not sure if they will help, but worth a shot.

Good luck

Gyro

edit; N2Gaming had a HT multi x1 problem some time agohttp://www.overclock.net/amd-motherb...-club-327.html, maybe next time he drops by he can share what he did to fix it.It read quite a few pages past that post but did not find a post with a solution.
Edited by Gyro - 8/13/10 at 6:54am
My System
(14 items)
 
  
CPUMotherboardGraphicsGraphics
AMD Ph IIx4 955 @ 3.2 Asus M2N32-sli dlx Asus GTX 460 1gb DirectCU MSI GTX 460 1gb Cyclone 
RAMHard DriveOptical DriveOS
4x2gb OCZ ddr2 1066 plats seagate 320gb sata lg supermulti dvd WIN 7 64 
MonitorKeyboardPowerCase
acer p221w ms SS ST75F-P 750w CM 690modded w/KazeMaster pro 
Mouse
ms intellimouse explorer3.0 
  hide details  
Reply
My System
(14 items)
 
  
CPUMotherboardGraphicsGraphics
AMD Ph IIx4 955 @ 3.2 Asus M2N32-sli dlx Asus GTX 460 1gb DirectCU MSI GTX 460 1gb Cyclone 
RAMHard DriveOptical DriveOS
4x2gb OCZ ddr2 1066 plats seagate 320gb sata lg supermulti dvd WIN 7 64 
MonitorKeyboardPowerCase
acer p221w ms SS ST75F-P 750w CM 690modded w/KazeMaster pro 
Mouse
ms intellimouse explorer3.0 
  hide details  
Reply
post #6814 of 12343
Hello everyone,well iam the proud owner of a new x4 945 that i just ordred form Newegg,as you can see iam runing the M2n32sli deluxe ,if anyone wants to give me some pointers on getting the new cpu to work please feel free to give me some advice. I have already used the onboard bios flash to update to 5002 and thats it so far,i have not reset the bios is that somthing i need to do also ? What A NOOB
New Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600k @ 4.5GHZ Asus Sabertooth P67 Rev. 3.0 Msi N580GTX Lightning Extreme 16gb G Skill Sniper 1600 
Hard DriveOptical DriveOSMonitor
Raptor 150 velociraptor 300 Plextor PX750A windows 7 pro 64 bit ASUS VE278Q x2 soon 3! 
KeyboardPowerCaseMouse
Logitech G15 Corsair HX1000w Antec 1200 v3 Logitech 
Mouse Pad
Logitech 
  hide details  
Reply
New Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600k @ 4.5GHZ Asus Sabertooth P67 Rev. 3.0 Msi N580GTX Lightning Extreme 16gb G Skill Sniper 1600 
Hard DriveOptical DriveOSMonitor
Raptor 150 velociraptor 300 Plextor PX750A windows 7 pro 64 bit ASUS VE278Q x2 soon 3! 
KeyboardPowerCaseMouse
Logitech G15 Corsair HX1000w Antec 1200 v3 Logitech 
Mouse Pad
Logitech 
  hide details  
Reply
post #6815 of 12343
Quote:
Originally Posted by 1spike View Post
Hello everyone,well iam the proud owner of a new x4 945 that i just ordred form Newegg,as you can see iam runing the M2n32sli deluxe ,if anyone wants to give me some pointers on getting the new cpu to work please feel free to give me some advice. I have already used the onboard bios flash to update to 5002 and thats it so far,i have not reset the bios is that somthing i need to do also ? What A NOOB
When you are ready to install the 945 just reset bios to defaults,replace cpu,then reset cmos, remove battery and move jumper to pins 2-3 for 30 seconds, move jumper pins back to 1-2, replace battery,reboot,set bios to defaults,save and exit.

That should get you up and running.

Good luck

Gyro
My System
(14 items)
 
  
CPUMotherboardGraphicsGraphics
AMD Ph IIx4 955 @ 3.2 Asus M2N32-sli dlx Asus GTX 460 1gb DirectCU MSI GTX 460 1gb Cyclone 
RAMHard DriveOptical DriveOS
4x2gb OCZ ddr2 1066 plats seagate 320gb sata lg supermulti dvd WIN 7 64 
MonitorKeyboardPowerCase
acer p221w ms SS ST75F-P 750w CM 690modded w/KazeMaster pro 
Mouse
ms intellimouse explorer3.0 
  hide details  
Reply
My System
(14 items)
 
  
CPUMotherboardGraphicsGraphics
AMD Ph IIx4 955 @ 3.2 Asus M2N32-sli dlx Asus GTX 460 1gb DirectCU MSI GTX 460 1gb Cyclone 
RAMHard DriveOptical DriveOS
4x2gb OCZ ddr2 1066 plats seagate 320gb sata lg supermulti dvd WIN 7 64 
MonitorKeyboardPowerCase
acer p221w ms SS ST75F-P 750w CM 690modded w/KazeMaster pro 
Mouse
ms intellimouse explorer3.0 
  hide details  
Reply
post #6816 of 12343
This may be a stupid question but will the new cpu boot on the old bios?
New Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600k @ 4.5GHZ Asus Sabertooth P67 Rev. 3.0 Msi N580GTX Lightning Extreme 16gb G Skill Sniper 1600 
Hard DriveOptical DriveOSMonitor
Raptor 150 velociraptor 300 Plextor PX750A windows 7 pro 64 bit ASUS VE278Q x2 soon 3! 
KeyboardPowerCaseMouse
Logitech G15 Corsair HX1000w Antec 1200 v3 Logitech 
Mouse Pad
Logitech 
  hide details  
Reply
New Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600k @ 4.5GHZ Asus Sabertooth P67 Rev. 3.0 Msi N580GTX Lightning Extreme 16gb G Skill Sniper 1600 
Hard DriveOptical DriveOSMonitor
Raptor 150 velociraptor 300 Plextor PX750A windows 7 pro 64 bit ASUS VE278Q x2 soon 3! 
KeyboardPowerCaseMouse
Logitech G15 Corsair HX1000w Antec 1200 v3 Logitech 
Mouse Pad
Logitech 
  hide details  
Reply
post #6817 of 12343
Quote:
Originally Posted by 1spike View Post
This may be a stupid question but will the new cpu boot on the old bios?
I don't think anyone has tried.
You have the latest installed so you are good to go.
Why do you ask?

Gyro
My System
(14 items)
 
  
CPUMotherboardGraphicsGraphics
AMD Ph IIx4 955 @ 3.2 Asus M2N32-sli dlx Asus GTX 460 1gb DirectCU MSI GTX 460 1gb Cyclone 
RAMHard DriveOptical DriveOS
4x2gb OCZ ddr2 1066 plats seagate 320gb sata lg supermulti dvd WIN 7 64 
MonitorKeyboardPowerCase
acer p221w ms SS ST75F-P 750w CM 690modded w/KazeMaster pro 
Mouse
ms intellimouse explorer3.0 
  hide details  
Reply
My System
(14 items)
 
  
CPUMotherboardGraphicsGraphics
AMD Ph IIx4 955 @ 3.2 Asus M2N32-sli dlx Asus GTX 460 1gb DirectCU MSI GTX 460 1gb Cyclone 
RAMHard DriveOptical DriveOS
4x2gb OCZ ddr2 1066 plats seagate 320gb sata lg supermulti dvd WIN 7 64 
MonitorKeyboardPowerCase
acer p221w ms SS ST75F-P 750w CM 690modded w/KazeMaster pro 
Mouse
ms intellimouse explorer3.0 
  hide details  
Reply
post #6818 of 12343
by reset to default you mean to use eazy flash again to reflash the 5002 bios to the new cpualso just to make sure you uninstall batt first then set jumpers correct or set jumpers then uninstall batt
New Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600k @ 4.5GHZ Asus Sabertooth P67 Rev. 3.0 Msi N580GTX Lightning Extreme 16gb G Skill Sniper 1600 
Hard DriveOptical DriveOSMonitor
Raptor 150 velociraptor 300 Plextor PX750A windows 7 pro 64 bit ASUS VE278Q x2 soon 3! 
KeyboardPowerCaseMouse
Logitech G15 Corsair HX1000w Antec 1200 v3 Logitech 
Mouse Pad
Logitech 
  hide details  
Reply
New Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600k @ 4.5GHZ Asus Sabertooth P67 Rev. 3.0 Msi N580GTX Lightning Extreme 16gb G Skill Sniper 1600 
Hard DriveOptical DriveOSMonitor
Raptor 150 velociraptor 300 Plextor PX750A windows 7 pro 64 bit ASUS VE278Q x2 soon 3! 
KeyboardPowerCaseMouse
Logitech G15 Corsair HX1000w Antec 1200 v3 Logitech 
Mouse Pad
Logitech 
  hide details  
Reply
post #6819 of 12343
Quote:
Originally Posted by 1spike View Post
by reset to default you mean to use eazy flash again to reflash the 5002 bios to the new cpualso just to make sure you uninstall batt first then set jumpers correct or set jumpers then uninstall batt
While in the bios setup(delete) just hit F5(reset to defaults) and then F10(save and exit).You only need to do this just before you replace the cpu.

Pull the battery first then move jumper, then move jumper back then replace battery.

Gyro
My System
(14 items)
 
  
CPUMotherboardGraphicsGraphics
AMD Ph IIx4 955 @ 3.2 Asus M2N32-sli dlx Asus GTX 460 1gb DirectCU MSI GTX 460 1gb Cyclone 
RAMHard DriveOptical DriveOS
4x2gb OCZ ddr2 1066 plats seagate 320gb sata lg supermulti dvd WIN 7 64 
MonitorKeyboardPowerCase
acer p221w ms SS ST75F-P 750w CM 690modded w/KazeMaster pro 
Mouse
ms intellimouse explorer3.0 
  hide details  
Reply
My System
(14 items)
 
  
CPUMotherboardGraphicsGraphics
AMD Ph IIx4 955 @ 3.2 Asus M2N32-sli dlx Asus GTX 460 1gb DirectCU MSI GTX 460 1gb Cyclone 
RAMHard DriveOptical DriveOS
4x2gb OCZ ddr2 1066 plats seagate 320gb sata lg supermulti dvd WIN 7 64 
MonitorKeyboardPowerCase
acer p221w ms SS ST75F-P 750w CM 690modded w/KazeMaster pro 
Mouse
ms intellimouse explorer3.0 
  hide details  
Reply
post #6820 of 12343
Thanks Gyro
New Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600k @ 4.5GHZ Asus Sabertooth P67 Rev. 3.0 Msi N580GTX Lightning Extreme 16gb G Skill Sniper 1600 
Hard DriveOptical DriveOSMonitor
Raptor 150 velociraptor 300 Plextor PX750A windows 7 pro 64 bit ASUS VE278Q x2 soon 3! 
KeyboardPowerCaseMouse
Logitech G15 Corsair HX1000w Antec 1200 v3 Logitech 
Mouse Pad
Logitech 
  hide details  
Reply
New Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600k @ 4.5GHZ Asus Sabertooth P67 Rev. 3.0 Msi N580GTX Lightning Extreme 16gb G Skill Sniper 1600 
Hard DriveOptical DriveOSMonitor
Raptor 150 velociraptor 300 Plextor PX750A windows 7 pro 64 bit ASUS VE278Q x2 soon 3! 
KeyboardPowerCaseMouse
Logitech G15 Corsair HX1000w Antec 1200 v3 Logitech 
Mouse Pad
Logitech 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD Motherboards
Overclock.net › Forums › AMD › AMD Motherboards › [Official] ASUS M2N-SLI and M2N32-SLI Club!