Overclock.net › Forums › AMD › AMD Motherboards › [Official] ASUS M2N-SLI and M2N32-SLI Club!
New Posts  All Forums:Forum Nav:

[Official] ASUS M2N-SLI and M2N32-SLI Club! - Page 964

post #9631 of 12343
Hi all, i cant for no have time, build or change my athlon for Phenom2x4 965, but now is time vacations..and i go to change, remmember...i can change BIOs since 1004 to 5002 but a diferent way , i not use ASUS 2 flash of BIOS, popUp banners i write in my lst post , that the banners, only way for can change vvios i think ....Asus Upgrade From WINDOWS...and i can, reboot. and change de junper to clear cmos, and firt time black monitor 2 times.. in 3th..run until say my press f1 or del. inot remmenber for waht buti think is for CNQ...or live i change to ENEABLE...and next to Disable...in this moment reload and can run and load SO, . no`promble...bot next estep is the BIGGER..is chage PROCESSOR..., bur for this a Ineed clear MOBO and all , the DUST, put/add Fans and reintlas Wxp for for a good inatalacion ...in this moetn INEEEDED the HELP... for config setup BIOS/PMTorNST.

But my post today is only for sayall, thank GR8, Gyro,Mrocha and all help to other guay can run yours MOBO M2n... run withn Phenoims...and have a system upgrade of low cost, thank...see in next week, next PARTYS, merry christmas for all...
    
CPUMotherboardGraphicsRAM
Athlon 64 x2 3800+ M2M32 SLI DELUXE WIFI XFX 250GTS 512*2 800Mhz DChannel Gskill 
Hard DriveOptical DriveOSMonitor
1-160gb WD sata2,1-640gb CabiarB sata2 1 Samsung Sata 24x WxpSp3 Lg 19 LR1900R 4ms 
KeyboardPowerCaseMouse
Genius KB-21e Scroll 520W OPEN A4tech X-710FS 
Mouse Pad
I NOT use 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Athlon 64 x2 3800+ M2M32 SLI DELUXE WIFI XFX 250GTS 512*2 800Mhz DChannel Gskill 
Hard DriveOptical DriveOSMonitor
1-160gb WD sata2,1-640gb CabiarB sata2 1 Samsung Sata 24x WxpSp3 Lg 19 LR1900R 4ms 
KeyboardPowerCaseMouse
Genius KB-21e Scroll 520W OPEN A4tech X-710FS 
Mouse Pad
I NOT use 
  hide details  
Reply
post #9632 of 12343
Happy holidays to you and all club members.
post #9633 of 12343
Hello, I just wanted to say that this forum is absolutely amazing, and I am glad to be a part of this community.
The guides for the M2N32-SLI Deluxe /w Phenom II x4 955 guide in particular have been pivotal in helping me to make this work. This is my first time installing a new cpu w/o my father's direct guidance, and the fact that it's not even directly supported, and I was able to make it work first try just goes to show you how well this thread helps people.

Thanks again for the amaziong support, and thanks for allowing me to be a part of this amazing community.

EDIT:

Here's my CPU-Z:

2167373.png

Going to do some tweaking and see what else I can get out of it, but for now I have Phenom II x4 955 BE (C3) working on M2N32-SLI Deluxe

--

Does anyone know if I should be overclocking the ram? I have set it to 2.1v && 4-4-4-12-auto in the bios and havnt done anything else to it since.
Edited by NFleck - 12/26/11 at 11:52pm
Kaby
(14 items)
 
AM3+
(15 items)
 
AM2+
(11 items)
 
CPUMotherboardGraphicsRAM
Intel i7 7700k Asus Z170 Pro Gaming/Aura gigabyte rx 580 8gb gaming g.skill ripjaw v 2x8GB 3000MHz cl15 
Hard DriveHard DriveCoolingOS
samsung 850 evo 250GB samsung 840 evo 250GB corsair h110i GTX windows 10 x64 
MonitorMonitorKeyboardPower
lg flatron w2361v 23" acer x193w razer blackwidow ultimate Raidmax 1200w AE-1200 
CaseMouse
thermaltake core x9 razer deathadder 
  hide details  
Reply
Kaby
(14 items)
 
AM3+
(15 items)
 
AM2+
(11 items)
 
CPUMotherboardGraphicsRAM
Intel i7 7700k Asus Z170 Pro Gaming/Aura gigabyte rx 580 8gb gaming g.skill ripjaw v 2x8GB 3000MHz cl15 
Hard DriveHard DriveCoolingOS
samsung 850 evo 250GB samsung 840 evo 250GB corsair h110i GTX windows 10 x64 
MonitorMonitorKeyboardPower
lg flatron w2361v 23" acer x193w razer blackwidow ultimate Raidmax 1200w AE-1200 
CaseMouse
thermaltake core x9 razer deathadder 
  hide details  
Reply
post #9634 of 12343
Quote:
Originally Posted by NFleck View Post

Hello, I just wanted to say that this forum is absolutely amazing, and I am glad to be a part of this community.
The guides for the M2N32-SLI Deluxe /w Phenom II x4 955 guide in particular have been pivotal in helping me to make this work. This is my first time installing a new cpu w/o my father's direct guidance, and the fact that it's not even directly supported, and I was able to make it work first try just goes to show you how well this thread helps people.
Thanks again for the amaziong support, and thanks for allowing me to be a part of this amazing community.
EDIT:
Here's my CPU-Z:
2167373.png
Going to do some tweaking and see what else I can get out of it, but for now I have Phenom II x4 955 BE (C3) working on M2N32-SLI Deluxe
--
Does anyone know if I should be overclocking the ram? I have set it to 2.1v && 4-4-4-12-auto in the bios and havnt done anything else to it since.

Welcome and congrats,

Here is a great guide for ocing http://www.overclock.net/amd-general/307316-offical-overclocking-guide-amd-socket-am2.html

Good luck

Gyro
My System
(14 items)
 
  
CPUMotherboardGraphicsGraphics
AMD Ph IIx4 955 @ 3.2 Asus M2N32-sli dlx Asus GTX 460 1gb DirectCU MSI GTX 460 1gb Cyclone 
RAMHard DriveOptical DriveOS
4x2gb OCZ ddr2 1066 plats seagate 320gb sata lg supermulti dvd WIN 7 64 
MonitorKeyboardPowerCase
acer p221w ms SS ST75F-P 750w CM 690modded w/KazeMaster pro 
Mouse
ms intellimouse explorer3.0 
  hide details  
Reply
My System
(14 items)
 
  
CPUMotherboardGraphicsGraphics
AMD Ph IIx4 955 @ 3.2 Asus M2N32-sli dlx Asus GTX 460 1gb DirectCU MSI GTX 460 1gb Cyclone 
RAMHard DriveOptical DriveOS
4x2gb OCZ ddr2 1066 plats seagate 320gb sata lg supermulti dvd WIN 7 64 
MonitorKeyboardPowerCase
acer p221w ms SS ST75F-P 750w CM 690modded w/KazeMaster pro 
Mouse
ms intellimouse explorer3.0 
  hide details  
Reply
post #9635 of 12343
Hi guys, im back with a problem.
My m2n32sli (all cables checked 2 times) dont boot. I press power button and then fake boot. No video, only fan @ 100% and then after few seconds turn off.
I have already removed battery, checked cables, change keyboard (usb/ps2), change sata port..what can i do?

EDIT: for the future. Press on CHIP BIOS on MB and mobo will start again biggrin.gif The chip under sata port and near corner..
Edited by crash01 - 12/27/11 at 6:23am
post #9636 of 12343
Quote:
Originally Posted by crash01 View Post

EDIT: for the future. Press on CHIP BIOS on MB and mobo will start again biggrin.gif The chip under sata port and near corner..

Why do you think you needed to do that. Have you been moving the board around a lot?
post #9637 of 12343
Quote:
Originally Posted by gr8sho View Post

Why do you think you needed to do that. Have you been moving the board around a lot?

No honestly, was inside a case in garage, maybe doing stairs moved a bit.
Anyway wasnt "all" inside and after pressed it, work again thumb.gif
post #9638 of 12343
Quote:
Originally Posted by NFleck View Post

Hello, I just wanted to say that this forum is absolutely amazing, and I am glad to be a part of this community.
The guides for the M2N32-SLI Deluxe /w Phenom II x4 955 guide in particular have been pivotal in helping me to make this work. This is my first time installing a new cpu w/o my father's direct guidance, and the fact that it's not even directly supported, and I was able to make it work first try just goes to show you how well this thread helps people.
Thanks again for the amaziong support, and thanks for allowing me to be a part of this amazing community.
EDIT:
Here's my CPU-Z:
2167373.png
Going to do some tweaking and see what else I can get out of it, but for now I have Phenom II x4 955 BE (C3) working on M2N32-SLI Deluxe
--
Does anyone know if I should be overclocking the ram? I have set it to 2.1v && 4-4-4-12-auto in the bios and havnt done anything else to it since.

Nice to hear. thumb.gif I can think of some other young people I'd like to see do what you did. biggrin.gif

If your RAM is running that fast on SPD settings, let it be. Any significant changes in performance are going to be realized either by working on the FSB or by increasing the frequency of the CPU itself.

I suggest getting your system information populated in control panel of this forum. Look up top. Mostly for others to offer help more easily.
post #9639 of 12343
I started OC today (first time). Got it @ 3.6GHz right now. Gonna run 3Dmark and see if there's a big difference. CPU temp is all at 41C right now.

2168173.png

I'll look into adding my info. (I thought I did. I added my rig?)
Kaby
(14 items)
 
AM3+
(15 items)
 
AM2+
(11 items)
 
CPUMotherboardGraphicsRAM
Intel i7 7700k Asus Z170 Pro Gaming/Aura gigabyte rx 580 8gb gaming g.skill ripjaw v 2x8GB 3000MHz cl15 
Hard DriveHard DriveCoolingOS
samsung 850 evo 250GB samsung 840 evo 250GB corsair h110i GTX windows 10 x64 
MonitorMonitorKeyboardPower
lg flatron w2361v 23" acer x193w razer blackwidow ultimate Raidmax 1200w AE-1200 
CaseMouse
thermaltake core x9 razer deathadder 
  hide details  
Reply
Kaby
(14 items)
 
AM3+
(15 items)
 
AM2+
(11 items)
 
CPUMotherboardGraphicsRAM
Intel i7 7700k Asus Z170 Pro Gaming/Aura gigabyte rx 580 8gb gaming g.skill ripjaw v 2x8GB 3000MHz cl15 
Hard DriveHard DriveCoolingOS
samsung 850 evo 250GB samsung 840 evo 250GB corsair h110i GTX windows 10 x64 
MonitorMonitorKeyboardPower
lg flatron w2361v 23" acer x193w razer blackwidow ultimate Raidmax 1200w AE-1200 
CaseMouse
thermaltake core x9 razer deathadder 
  hide details  
Reply
post #9640 of 12343
I added this yesterday... Why isn't it showing up in my "sig" area.?

Figured it out. Thanks again for the help guys.

Now, to me it seems the easiest way to increase the cpu speed is to increase the multiplier. I changed the HT bus to 202 MHz in the bios, and set the multiplier to x20 (so that I can set it to anything <20 in the nVidia CP). Currently have it @ x18, and it seems to be stable. Should I be increasing the HT bus, or leave it and just mess with the multiplier? Also, should I just leave the voltage as is? I set it @ 1.35v when I installed the cpu, and havn't changed it since.. I'd really rather have reliability, long life, and low temps (as I am using the stock cooler).. But right now the core temps are all at 40.0 C, so I guess I could prob go a bit higher than 3.6GHz?

Also, I read the general overclocking guide for AM2, but I found that reading guides specifically designed for this cpu/mobo are a lot easier for a n00b like me to understand. I'm going to take a look at it now that I actually understand what the numbers and terms are referring to.

I'll be back... smile.gif

EDIT:

OK, I have set the cpu to 3838.11 MHz (202.01 * 19)
2168436.png


I have done a benchmark with 3DMark (dx10) and now just tried the stress test on Everest, and I like Everest more I think.
Anyways, here are some images I took of benchmarks @ 3.84GHz

th_cpuid.pngth_cachemem.png
th_stabilitytest.pngth_stabilitytest2.png

---

Now, I'm seeing the average core temps went from (@ idle):
  • CPU: 51.2°C
  • Core 1: 41°C
  • Core 2: 41°C
  • Core 3: 41°C
  • Core 4: 41°C

to (after ~4mins of stress testing):
  • CPU: 67.8°C
  • Core 1: 56.6°C
  • Core 2: 56.6°C
  • Core 3: 56.6°C
  • Core 4: 56.6°C

---

What worries me are these temps. @ 100% cpu load, the "CPU" temp is almost 70°C.. This is bad no? The cores are only ~55°C, what is more important.. Do you think I should go back down to 3.6GHz (202 x18), and see if those temps are better, or are these temps not too bad?

I'll try stress testing @ 3.6GHz and see what kind of temps I get, and post back.
Edited by NFleck - 12/27/11 at 1:49pm
Kaby
(14 items)
 
AM3+
(15 items)
 
AM2+
(11 items)
 
CPUMotherboardGraphicsRAM
Intel i7 7700k Asus Z170 Pro Gaming/Aura gigabyte rx 580 8gb gaming g.skill ripjaw v 2x8GB 3000MHz cl15 
Hard DriveHard DriveCoolingOS
samsung 850 evo 250GB samsung 840 evo 250GB corsair h110i GTX windows 10 x64 
MonitorMonitorKeyboardPower
lg flatron w2361v 23" acer x193w razer blackwidow ultimate Raidmax 1200w AE-1200 
CaseMouse
thermaltake core x9 razer deathadder 
  hide details  
Reply
Kaby
(14 items)
 
AM3+
(15 items)
 
AM2+
(11 items)
 
CPUMotherboardGraphicsRAM
Intel i7 7700k Asus Z170 Pro Gaming/Aura gigabyte rx 580 8gb gaming g.skill ripjaw v 2x8GB 3000MHz cl15 
Hard DriveHard DriveCoolingOS
samsung 850 evo 250GB samsung 840 evo 250GB corsair h110i GTX windows 10 x64 
MonitorMonitorKeyboardPower
lg flatron w2361v 23" acer x193w razer blackwidow ultimate Raidmax 1200w AE-1200 
CaseMouse
thermaltake core x9 razer deathadder 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD Motherboards
Overclock.net › Forums › AMD › AMD Motherboards › [Official] ASUS M2N-SLI and M2N32-SLI Club!