I couldn't stand the high temperatures so i removed my cpu from its socket and pulled out the razerblade !
After a while the IHS popped of. I removed the upper part from the socket and installed it on my P5K-E and installed my infinity ( bolts/springs ) and succesfull booted in windows ! One problem --> High temps, it seems my infinity hits some caps, no problem with a cpu with IHS
. Mounted my RS1283 on it but temps where +- the same as with the IHS, the core only touches 1 Heatpipe !
So i took the IHS, sanded the bottom until the glue was gone, reapplied some thermal-paste ( Arctic ceramique ). Remounted my 1283 ( with bad zalman paste, couldn't find my fresh tube of MX-2
The temperatures are a bit beter now ! Currently priming at 303X12.5 ( 3800mhz). 1.36V
Before 70Â°c Prime
After 61Â°c Prime
And i'm certain the temps wil go down some more when i find my MX-2! ( mounted with little bit of bad zalman tim on each heatpipe, not enough paste for a decent mount).
Conclusion : If you have a E5200 with high temps --> remove IHS , sand down the bottom so its a thighter fit, apply a good Tim --> enjoy yr new temperatures !!