One of the reasons I posted is because I'm skeptical myself. There is no question the system is 100% stable at this point but the vcore just seemed too low and I was looking for a knowledgeable reply like "that's physically
impossible because of <x> which means your system has to actually be doing <y> and you need to do <z>". However, it's not unusual for me to simply be very lucky.
Screens with a quick 5/5 IBT and voltage while under load(it would read 1.152V as it did in CPU-Z if it gave the extra digit in OCCT)
My temp sensors both don't read below 41-40 C so I can't get accurate idle temps so I'm not sure how accurate those max temps are. When I'm not using IBT max temps are more like 45 C at full load. I am at 22 C ambient, so if anyone can give me a quick run on how to be sure I get accurate temps from here on out would be nice.
I already had the system stable at 3.6GHz back at a 12.5 multiplier with a tiny bit higher vcore before I went back to get a screenshot and I'll continue to take it up in small steps and see where it goes.