Overclock.net › Forums › Intel › Intel CPUs › E5200 - Overclocking Thread
New Posts  All Forums:Forum Nav:

E5200 - Overclocking Thread - Page 132

Poll Results: Should the thread name be changed to E5x00 Overclocking Thread

Poll expired: Jan 24, 2009  
  • 58% (39)
    Yes, Change it to E5x00 Overclocking thread
  • 41% (28)
    No, Lets keep it how it is
67 Total Votes  
post #1311 of 4653
Quote:
Originally Posted by Eten View Post
One of the reasons I posted is because I'm skeptical myself. There is no question the system is 100% stable at this point but the vcore just seemed too low and I was looking for a knowledgeable reply like "that's physically impossible because of <x> which means your system has to actually be doing <y> and you need to do <z>". However, it's not unusual for me to simply be very lucky.

Screens with a quick 5/5 IBT and voltage while under load(it would read 1.152V as it did in CPU-Z if it gave the extra digit in OCCT)



My temp sensors both don't read below 41-40 C so I can't get accurate idle temps so I'm not sure how accurate those max temps are. When I'm not using IBT max temps are more like 45 C at full load. I am at 22 C ambient, so if anyone can give me a quick run on how to be sure I get accurate temps from here on out would be nice.

I already had the system stable at 3.6GHz back at a 12.5 multiplier with a tiny bit higher vcore before I went back to get a screenshot and I'll continue to take it up in small steps and see where it goes.
Seems like you just got a good chip. What's your VID
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9550 E0 3.8GHz @ 1.16v Asus P5Q p45 BFG GTX 260 216 2 x 2GB Mushkin PC2-8500 
Hard DriveOSMonitorPower
500GB 7200.12 x2 RAID 0 Windows Vista Ultimate x64 20" LG Flatron 2ms OCZ Stealth Extreme 700w 
Case
Antec Three Hundred 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9550 E0 3.8GHz @ 1.16v Asus P5Q p45 BFG GTX 260 216 2 x 2GB Mushkin PC2-8500 
Hard DriveOSMonitorPower
500GB 7200.12 x2 RAID 0 Windows Vista Ultimate x64 20" LG Flatron 2ms OCZ Stealth Extreme 700w 
Case
Antec Three Hundred 
  hide details  
Reply
post #1312 of 4653
his vid is 1.1250, check his screenshots.
Edited by glussier - 2/14/09 at 6:41am
Pegasus
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9650 24/7 4.05ghz@1.26v Asus P5Q-E EVGA GTS450 SC sli 4gB Kingston HyperX ddr2 8500 
Hard DriveOptical DriveOSMonitor
Intel x25-m 80gB G2, Hitachi 1tB LG HL-DT-ST DVDRAM GSA-H10N Windows7 Ultimate 64bit 2x Samsung 2043NW 
PowerCase
Corsair 750TX Antec Three Hundred Gamer 
  hide details  
Reply
Pegasus
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9650 24/7 4.05ghz@1.26v Asus P5Q-E EVGA GTS450 SC sli 4gB Kingston HyperX ddr2 8500 
Hard DriveOptical DriveOSMonitor
Intel x25-m 80gB G2, Hitachi 1tB LG HL-DT-ST DVDRAM GSA-H10N Windows7 Ultimate 64bit 2x Samsung 2043NW 
PowerCase
Corsair 750TX Antec Three Hundred Gamer 
  hide details  
Reply
post #1313 of 4653
Quote:
Originally Posted by glussier View Post
his vid is 1.1250, check is screenshots.
im sorry but neither of his screenshots show VID. Not that it matters.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9550 E0 3.8GHz @ 1.16v Asus P5Q p45 BFG GTX 260 216 2 x 2GB Mushkin PC2-8500 
Hard DriveOSMonitorPower
500GB 7200.12 x2 RAID 0 Windows Vista Ultimate x64 20" LG Flatron 2ms OCZ Stealth Extreme 700w 
Case
Antec Three Hundred 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9550 E0 3.8GHz @ 1.16v Asus P5Q p45 BFG GTX 260 216 2 x 2GB Mushkin PC2-8500 
Hard DriveOSMonitorPower
500GB 7200.12 x2 RAID 0 Windows Vista Ultimate x64 20" LG Flatron 2ms OCZ Stealth Extreme 700w 
Case
Antec Three Hundred 
  hide details  
Reply
post #1314 of 4653
Quote:
Originally Posted by j0njo View Post
im sorry but neither of his screenshots show VID. Not that it matters.
Look again.

http://img134.imageshack.us/img134/7...oc1152vwo3.jpg
    
CPUMotherboardGraphicsRAM
E8400, E8600, 980BE T2RS+, P5E3, TA890FXE 8800GTS's,GTX's,GS,Ultra's,9600GT Lots of D9's and some crap DDR3 
Hard DrivePowerCase
Seagate 250GB + 80GB WD for benching TT 875w, Corsair 650TX Custom bench station 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
E8400, E8600, 980BE T2RS+, P5E3, TA890FXE 8800GTS's,GTX's,GS,Ultra's,9600GT Lots of D9's and some crap DDR3 
Hard DrivePowerCase
Seagate 250GB + 80GB WD for benching TT 875w, Corsair 650TX Custom bench station 
  hide details  
Reply
post #1315 of 4653
Quote:
Originally Posted by PizzaMan View Post
of course! I just use coretemp for vid. Who knew!
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9550 E0 3.8GHz @ 1.16v Asus P5Q p45 BFG GTX 260 216 2 x 2GB Mushkin PC2-8500 
Hard DriveOSMonitorPower
500GB 7200.12 x2 RAID 0 Windows Vista Ultimate x64 20" LG Flatron 2ms OCZ Stealth Extreme 700w 
Case
Antec Three Hundred 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9550 E0 3.8GHz @ 1.16v Asus P5Q p45 BFG GTX 260 216 2 x 2GB Mushkin PC2-8500 
Hard DriveOSMonitorPower
500GB 7200.12 x2 RAID 0 Windows Vista Ultimate x64 20" LG Flatron 2ms OCZ Stealth Extreme 700w 
Case
Antec Three Hundred 
  hide details  
Reply
post #1316 of 4653
My memory is OCZ DDR2 PC8500-1066Mhz. It is setup in BIOS to run at 2.1 as OCZ is recomending on package also the timings are the ones that OCZ is saying(auto detected by BIOS). I have enabled LOAD LINE CALIBRATION.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E5200@3.9Ghz ASUS P5QL-E EVGA 9600 GT dual slot 2x1GB Crucial Ballistix PC2-8500 1066MHz 
Hard DriveOSMonitorPower
Seagate 500GB Windows XP Professional Samsung 20'' 206BW OCZ ModXStream 600W 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E5200@3.9Ghz ASUS P5QL-E EVGA 9600 GT dual slot 2x1GB Crucial Ballistix PC2-8500 1066MHz 
Hard DriveOSMonitorPower
Seagate 500GB Windows XP Professional Samsung 20'' 206BW OCZ ModXStream 600W 
  hide details  
Reply
post #1317 of 4653
Go back in the bios and set your ram voltage to 2.1volt. Your p5ql pro can't detect the Epp #1 voltage. And then, you should be good to go higher in your overclock. Set the vcore to 1.3625 and see how far you can go stable with that.
Pegasus
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9650 24/7 4.05ghz@1.26v Asus P5Q-E EVGA GTS450 SC sli 4gB Kingston HyperX ddr2 8500 
Hard DriveOptical DriveOSMonitor
Intel x25-m 80gB G2, Hitachi 1tB LG HL-DT-ST DVDRAM GSA-H10N Windows7 Ultimate 64bit 2x Samsung 2043NW 
PowerCase
Corsair 750TX Antec Three Hundred Gamer 
  hide details  
Reply
Pegasus
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9650 24/7 4.05ghz@1.26v Asus P5Q-E EVGA GTS450 SC sli 4gB Kingston HyperX ddr2 8500 
Hard DriveOptical DriveOSMonitor
Intel x25-m 80gB G2, Hitachi 1tB LG HL-DT-ST DVDRAM GSA-H10N Windows7 Ultimate 64bit 2x Samsung 2043NW 
PowerCase
Corsair 750TX Antec Three Hundred Gamer 
  hide details  
Reply
post #1318 of 4653
Thread Starter 
Quote:
Originally Posted by 3Dreamers View Post
Hi guys,
Did anybody push this chip to 3.6-3.8 without modifing other voltages like VTT, GTL, NB?
I am using P5QL-E and I am trying to go to 3.8 but I am really confused about athor volatges that I can set on my BIOS.
I havent touched VTT or GTL even on my 4.2Ghz run. NB voltage i did add a little bit, but I dont think it was necessary. On 3.62 24/7 I am running stock NB, VTT and GTL.
The IntriX
(13 items)
 
  
CPUMotherboardGraphicsRAM
E5200 @ 3.50 Ghz 1.344V 24/7 4.208Ghz 1.52V ASUS P5KC - VDroop Mod XFX HD 4770 512 MB 2 x 1 GB Kingston HyperX DDR800 
Hard DriveOptical DriveOSMonitor
WD 160 GB 7200rpm + WD 320 GB Samsung Writemaster DVD+RW/CD+RW Windows 7 32 bit LG 22" 2ms 4000:1 
KeyboardPowerCaseMouse
Basic Microsoft Wireless Antec Neo HE 500W Modular Modecom Active - Pearl White Basic Microsoft Wireless Laser Mouse 
  hide details  
Reply
The IntriX
(13 items)
 
  
CPUMotherboardGraphicsRAM
E5200 @ 3.50 Ghz 1.344V 24/7 4.208Ghz 1.52V ASUS P5KC - VDroop Mod XFX HD 4770 512 MB 2 x 1 GB Kingston HyperX DDR800 
Hard DriveOptical DriveOSMonitor
WD 160 GB 7200rpm + WD 320 GB Samsung Writemaster DVD+RW/CD+RW Windows 7 32 bit LG 22" 2ms 4000:1 
KeyboardPowerCaseMouse
Basic Microsoft Wireless Antec Neo HE 500W Modular Modecom Active - Pearl White Basic Microsoft Wireless Laser Mouse 
  hide details  
Reply
post #1319 of 4653
Hello All,

I’m more ore less new to this over clocking, the last processor I’ve over clocked was a P1-200mmx, so I guess I can use some help.
I have an Asus P5QL-EM mboard (Intel G43) with 4 GB PC2-8500(2x2) Kingston hyper X memory (KHX8500D2K4/4G) and the e5200 processor. I also have an aftermarket cooler but unfortunately that won’t fit my case. In time I will fix this problem but for now the standard cooler will have to do. And I think the standard cooler is no too bad since I haven’t seen temperatures above 45 degrees.
I would like to run the processor with a FSB of 250 MHz so I can release some of the potential of the PC2-8500 memory. But so far all my attempts have failed. Running the memory at its rated voltage of 2.2v the pc won’t even post. I also tweeked the north bridge and CPU voltage settings but all have resulted in an unstable system. (Battlefield 2 crashes within 20 minutes or so) Could I have a faulty pair of memory modules or am I doing something wrong here?

Thanks,

WB

Ps. The system seems to be stable at its native speed.
    
CPUMotherboardGraphicsRAM
Intel Dual Core E5200 2.5GHz Asus P5QL-EM (Intel G43) X4500 4GB Kingston Hyper-X (2x2) 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Dual Core E5200 2.5GHz Asus P5QL-EM (Intel G43) X4500 4GB Kingston Hyper-X (2x2) 
  hide details  
Reply
post #1320 of 4653
Could you go in your usercp and edit your system's specs?

Instead of trying to extract the max performance of your cpu and ram at the same time, you should start by slowing down your ram, and find if you can have a stable cpu on a 250mhz base frequency.

Also, are you using the onboard video card or did you install an aftermarket pci-e video card?
Edited by glussier - 1/29/09 at 5:16am
Pegasus
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9650 24/7 4.05ghz@1.26v Asus P5Q-E EVGA GTS450 SC sli 4gB Kingston HyperX ddr2 8500 
Hard DriveOptical DriveOSMonitor
Intel x25-m 80gB G2, Hitachi 1tB LG HL-DT-ST DVDRAM GSA-H10N Windows7 Ultimate 64bit 2x Samsung 2043NW 
PowerCase
Corsair 750TX Antec Three Hundred Gamer 
  hide details  
Reply
Pegasus
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9650 24/7 4.05ghz@1.26v Asus P5Q-E EVGA GTS450 SC sli 4gB Kingston HyperX ddr2 8500 
Hard DriveOptical DriveOSMonitor
Intel x25-m 80gB G2, Hitachi 1tB LG HL-DT-ST DVDRAM GSA-H10N Windows7 Ultimate 64bit 2x Samsung 2043NW 
PowerCase
Corsair 750TX Antec Three Hundred Gamer 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › E5200 - Overclocking Thread