Originally Posted by eminded1
ok jsut to say. i got it vdroop moded again. i used a better pencil. did iit about 10 times. and walaoa. 1.40 selectedi n bios . 1.41 idle and load it acually goes up to 1.42 and then 1.41 and at reallly stress it might go down to 1.39. this is verry cool compared to before. 1.47 idle and 1.36 load.. i am inpressed. is there any LONG term damage due to the vdroop mod with pencil?
But all in all i have elminated all vdroop but there is still some there so its ok.
EDIT Its steady at 1.41 all stess tests. now im gona se if i can push the clock up higher. now that he volts are good.
I have eliminated all vdroop for my p5n-e sli. yey
EDIT: Now i got it stable 1.44idle 1.44 load 3.60ghz e5200.
I personally wouldnt run the voltage that high. I dont like to use vdroop mods on 45nm, but thats just me. If I were you, I would wipe off some of the lead so that there is some droop, and make sure your VTT is at approx 1.26v max.Edited by ericeod - 3/17/09 at 7:19pm