Overclock.net › Forums › Intel › Intel CPUs › E5200 - Overclocking Thread
New Posts  All Forums:Forum Nav:

E5200 - Overclocking Thread - Page 256

Poll Results: Should the thread name be changed to E5x00 Overclocking Thread

Poll expired: Jan 24, 2009  
  • 58% (39)
    Yes, Change it to E5x00 Overclocking thread
  • 41% (28)
    No, Lets keep it how it is
67 Total Votes  
post #2551 of 4653
Hello ppl, i have purchased my E5200 today, and i took a not good E5200...

im running stable 3700mhz (12.5x296) at 1.55v

i have a superflower icecube, with 2 90mm fans, on full load its reachin 65º on cores...

my motherboard is an Asus P5N-E SLI w bios v1201 and 2x2gb G.Skill 800

i think my processor got soomethink like FSB Wall, because before it, i had an E4300 processor, and it runs 3420mhz stable (9x380)...

i already tried to put 1.6v on it, and it dont boot up..

i would ask OverclockerX that have the same mobo, what bios version do you used to get 4ghz ?
zoieta PC
(13 items)
 
  
CPUMotherboardGraphicsRAM
E5200 @ 3700 Asus P5N-E SLI PowerColor HD4850 PLAY! G.Skill 2x2gb DDR2 800 @ 1000 
Hard DriveOSMonitorPower
2x160gb Samsung RAID-0 Vista 32 LG W2284F 22" Spire Rocketeer IV 600w 
CaseMouse
CooolerMaster CM690 Logitech Standart 
  hide details  
Reply
zoieta PC
(13 items)
 
  
CPUMotherboardGraphicsRAM
E5200 @ 3700 Asus P5N-E SLI PowerColor HD4850 PLAY! G.Skill 2x2gb DDR2 800 @ 1000 
Hard DriveOSMonitorPower
2x160gb Samsung RAID-0 Vista 32 LG W2284F 22" Spire Rocketeer IV 600w 
CaseMouse
CooolerMaster CM690 Logitech Standart 
  hide details  
Reply
post #2552 of 4653
Quote:
Originally Posted by zoieta View Post
Hello ppl, i have purchased my E5200 today, and i took a not good E5200...

im running stable 3700mhz (12.5x296) at 1.55v

i have a superflower icecube, with 2 90mm fans, on full load its reachin 65º on cores...

my motherboard is an Asus P5N-E SLI w bios v1201 and 2x2gb G.Skill 800

i think my processor got soomethink like FSB Wall, because before it, i had an E4300 processor, and it runs 3420mhz stable (9x380)...

i already tried to put 1.6v on it, and it dont boot up..

i would ask OverclockerX that have the same mobo, what bios version do you used to get 4ghz ?
-Try not to exceed 1.45v (in cpuz. should be listed a little higher than that in bios).

-don't think that just because you have a 12.5 multi means that you must use all of it. I run 333 x 11.5 and it works great for me (3.83Ghz)

-Almost all of these chips will run a 333fsb because wolfdales are sexy like that. But the factor here becomes the multi. They will not all run a 333 fsb at the full 12.5 multi. But like me 333 x 11 or 11.5, etc works great. (Heck, even 333 x 10.5 is 3500mhz, and still a decent OC)

-You need to make sure that when you run higher fsb speeds, that your not OC'ing your Ram in the process. You should have a "memory multiplier" number in the bios. Change it to say 2.4 because that would put your ram speeds back to stock (if you are using 800 that is)
Edited by W4LNUT5 - 4/18/09 at 2:48pm
    
CPUMotherboardGraphicsRAM
I5-2500k 4.8Ghz @ 1.38v Z68X-UD4-B3 PNY 480 8GB Dominator 1600's 
Hard DriveOptical DriveOSMonitor
Intel 510 + 300GB Velociraptor LG DVD RW Server 2012 HP 25" + HP 20" 
KeyboardPowerCaseMouse
Deck Legend TX850W XClio Coolbox Mamba 
Mouse PadAudio
Dolica HD550's 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
I5-2500k 4.8Ghz @ 1.38v Z68X-UD4-B3 PNY 480 8GB Dominator 1600's 
Hard DriveOptical DriveOSMonitor
Intel 510 + 300GB Velociraptor LG DVD RW Server 2012 HP 25" + HP 20" 
KeyboardPowerCaseMouse
Deck Legend TX850W XClio Coolbox Mamba 
Mouse PadAudio
Dolica HD550's 
  hide details  
Reply
post #2553 of 4653
Guys, quick question.

I ordered a pair of Twin2X4096-8500C5 1066Mhz, do you need to set back your CPU to the default speed when installing it?

Right now the "Value" budget RAM is holding back my E5200. Vista takes ages to load...
gaming box
(13 items)
 
  
CPUMotherboardGraphicsRAM
E5200 @ 3.5Ghz (10.5x333 @ 1.38V) VID:1.2250V Asus P5Q Sapphire x1950pro 256MB DDR3 Ballistix PC2-6400 @ 1066MHz 5-5-5-15 (2.0V) 
Hard DriveOSMonitorPower
Hitachi 250GB - 7200 rpm Vista Ultimate x64 Samsung T220 Corsair VX550 
CaseMouseMouse Pad
X-Gear Vento Icemat Deathadder 
  hide details  
Reply
gaming box
(13 items)
 
  
CPUMotherboardGraphicsRAM
E5200 @ 3.5Ghz (10.5x333 @ 1.38V) VID:1.2250V Asus P5Q Sapphire x1950pro 256MB DDR3 Ballistix PC2-6400 @ 1066MHz 5-5-5-15 (2.0V) 
Hard DriveOSMonitorPower
Hitachi 250GB - 7200 rpm Vista Ultimate x64 Samsung T220 Corsair VX550 
CaseMouseMouse Pad
X-Gear Vento Icemat Deathadder 
  hide details  
Reply
post #2554 of 4653
Quote:
Originally Posted by spar View Post
Guys, quick question.

I ordered a pair of Twin2X4096-8500C5 1066Mhz, do you need to set back your CPU to the default speed when installing it?

Right now the "Value" budget RAM is holding back my E5200. Vista takes ages to load...
No. I upgraded my system a few months ago from 4gb of g-skill ddr2 800 to 8gb of ddr2 1066 g-skill.

The only thing you will want to do is check your OC in the bios again. You can probably change the memory multi to something new (just because you can handle more now).

But it sounds like you're going to go back to pushing the system harder anyways. So you should be fine. Pop it in and see how she goes
    
CPUMotherboardGraphicsRAM
I5-2500k 4.8Ghz @ 1.38v Z68X-UD4-B3 PNY 480 8GB Dominator 1600's 
Hard DriveOptical DriveOSMonitor
Intel 510 + 300GB Velociraptor LG DVD RW Server 2012 HP 25" + HP 20" 
KeyboardPowerCaseMouse
Deck Legend TX850W XClio Coolbox Mamba 
Mouse PadAudio
Dolica HD550's 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
I5-2500k 4.8Ghz @ 1.38v Z68X-UD4-B3 PNY 480 8GB Dominator 1600's 
Hard DriveOptical DriveOSMonitor
Intel 510 + 300GB Velociraptor LG DVD RW Server 2012 HP 25" + HP 20" 
KeyboardPowerCaseMouse
Deck Legend TX850W XClio Coolbox Mamba 
Mouse PadAudio
Dolica HD550's 
  hide details  
Reply
post #2555 of 4653
New stable high of 3.825 at 1.4v
http://img522.imageshack.us/img522/630/3825stable.png
http://img522.imageshack.us/img522/630/3825stable.png
W4LNUT5 - I just got a second e5200 and what a difference in lower volts! My old cpu would not post at 332+ , yet to check the new cpu out.
Beige box
(13 items)
 
  
CPUMotherboardGraphicsRAM
e5200 abit IP-35 pro hd4670 2x1gb cheap ddr2 800mhz 
Power
ten quid 
  hide details  
Reply
Beige box
(13 items)
 
  
CPUMotherboardGraphicsRAM
e5200 abit IP-35 pro hd4670 2x1gb cheap ddr2 800mhz 
Power
ten quid 
  hide details  
Reply
post #2556 of 4653
I guess the "almost all chips can handle 333 FSB" doesn't apply to me, this thing can't handle anything past 300. Well, I managed to boot at 3.43GHz and do 5 minutes of LinPack, before it errored. The settings were 1.35V Vcore, 1.38V FSB Termination, 1.65V PLL, 0.921V CPU Reference (GTL), 1.24V MCH, 0.923V MCH Reference (GTL). Anyone want to help me get a higher OC? I'm aiming for 3.5GHz. I noticed that my chip likes higher FSB Termination better than higher VCore.
First Build
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Pentium E5200 3300MHz @ 1.3125V, 1.225V VID Gigabyte EP45-UD3L NVIDIA GeForce 9500GT Corsair TwinX 4096MB DDR2-800 
Hard DriveOptical DriveOSMonitor
Seagate Barracuda 7200.12 500GB TSST-Corp 16x DVD+/-RW W/ LightScribe Windows Vista Ultimate 32-bit Samsung SyncMaster 920NX & Dell 19" CRT 
KeyboardPowerCaseMouse
Compaq Stock Cooler Master 350W Cooler Master Elite 330 Compaq Stock 
Mouse Pad
Logitech 
  hide details  
Reply
First Build
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Pentium E5200 3300MHz @ 1.3125V, 1.225V VID Gigabyte EP45-UD3L NVIDIA GeForce 9500GT Corsair TwinX 4096MB DDR2-800 
Hard DriveOptical DriveOSMonitor
Seagate Barracuda 7200.12 500GB TSST-Corp 16x DVD+/-RW W/ LightScribe Windows Vista Ultimate 32-bit Samsung SyncMaster 920NX & Dell 19" CRT 
KeyboardPowerCaseMouse
Compaq Stock Cooler Master 350W Cooler Master Elite 330 Compaq Stock 
Mouse Pad
Logitech 
  hide details  
Reply
post #2557 of 4653
Quote:
Originally Posted by spakkker View Post
New stable high of 3.825 at 1.4v
http://img522.imageshack.us/img522/630/3825stable.png
http://img522.imageshack.us/img522/630/3825stable.png
W4LNUT5 - I just got a second e5200 and what a difference in lower volts! My old cpu would not post at 332+ , yet to check the new cpu out.
Nice

Quote:
Originally Posted by kirayamato26 View Post
I guess the "almost all chips can handle 333 FSB" doesn't apply to me, this thing can't handle anything past 300. Well, I managed to boot at 3.43GHz and do 5 minutes of LinPack, before it errored. The settings were 1.35V Vcore, 1.38V FSB Termination, 1.65V PLL, 0.921V CPU Reference (GTL), 1.24V MCH, 0.923V MCH Reference (GTL). Anyone want to help me get a higher OC? I'm aiming for 3.5GHz. I noticed that my chip likes higher FSB Termination better than higher VCore.
Hmm. Even my old 1.25VID chip would do 333. Hell, it would handle 360 on my board.

Tried something like 300 x 11.5 (3450mhz. close enough)
    
CPUMotherboardGraphicsRAM
I5-2500k 4.8Ghz @ 1.38v Z68X-UD4-B3 PNY 480 8GB Dominator 1600's 
Hard DriveOptical DriveOSMonitor
Intel 510 + 300GB Velociraptor LG DVD RW Server 2012 HP 25" + HP 20" 
KeyboardPowerCaseMouse
Deck Legend TX850W XClio Coolbox Mamba 
Mouse PadAudio
Dolica HD550's 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
I5-2500k 4.8Ghz @ 1.38v Z68X-UD4-B3 PNY 480 8GB Dominator 1600's 
Hard DriveOptical DriveOSMonitor
Intel 510 + 300GB Velociraptor LG DVD RW Server 2012 HP 25" + HP 20" 
KeyboardPowerCaseMouse
Deck Legend TX850W XClio Coolbox Mamba 
Mouse PadAudio
Dolica HD550's 
  hide details  
Reply
post #2558 of 4653
Quote:
Originally Posted by W4LNUT5 View Post
No. I upgraded my system a few months ago from 4gb of g-skill ddr2 800 to 8gb of ddr2 1066 g-skill.

The only thing you will want to do is check your OC in the bios again. You can probably change the memory multi to something new (just because you can handle more now).
Ah great thanks.

Quote:
But it sounds like you're going to go back to pushing the system harder anyways. So you should be fine. Pop it in and see how she goes
Yeah, had a few busy months but this baby still needs pushing
gaming box
(13 items)
 
  
CPUMotherboardGraphicsRAM
E5200 @ 3.5Ghz (10.5x333 @ 1.38V) VID:1.2250V Asus P5Q Sapphire x1950pro 256MB DDR3 Ballistix PC2-6400 @ 1066MHz 5-5-5-15 (2.0V) 
Hard DriveOSMonitorPower
Hitachi 250GB - 7200 rpm Vista Ultimate x64 Samsung T220 Corsair VX550 
CaseMouseMouse Pad
X-Gear Vento Icemat Deathadder 
  hide details  
Reply
gaming box
(13 items)
 
  
CPUMotherboardGraphicsRAM
E5200 @ 3.5Ghz (10.5x333 @ 1.38V) VID:1.2250V Asus P5Q Sapphire x1950pro 256MB DDR3 Ballistix PC2-6400 @ 1066MHz 5-5-5-15 (2.0V) 
Hard DriveOSMonitorPower
Hitachi 250GB - 7200 rpm Vista Ultimate x64 Samsung T220 Corsair VX550 
CaseMouseMouse Pad
X-Gear Vento Icemat Deathadder 
  hide details  
Reply
post #2559 of 4653
Hey all.

Unfortunately my status has to go back to "stock" for now; some odd system instabilities seem to be cropping up and I need to isolate the issue. Anyway, it's good to be back.
4690K System
(12 items)
 
HTPC
(9 items)
 
HP dv6 laptop
(13 items)
 
CPUMotherboardGraphicsRAM
Core i5 4690K ASRock Z97 Extreme4 XFX Radeon 7950 32 GB DDR3-2133 
Hard DriveOptical DriveCoolingOS
Samsung 850 EVO SSD Samsung DVD/CD-writer Corsair Hydro H60 Windows 7 
MonitorMonitorPowerCase
ASUS PA248Q Dell U2412M XFX 850W Black Edition XXX Fractal Design Arc Midi 2 
CPUMotherboardGraphicsRAM
Pentium Dual Core E6700 MSI G41M-P33 Combo ATI HD4350 Kingston ValueRAM DDR3-1333 
RAMHard DriveOSMonitor
Kingston ValueRAM DDR3-1333 WD Caviar Blue Windows 7 64-bit Sony 32" TV set 
Case
Apex TX-381 
CPUGraphicsRAMHard Drive
Core i5 430M GT230M (1 Gb dedicated) 8 GB DDR3-1066 640 GB 
OSMonitor
Windows 7 Home Premium (64-bit) 15.6" 
  hide details  
Reply
4690K System
(12 items)
 
HTPC
(9 items)
 
HP dv6 laptop
(13 items)
 
CPUMotherboardGraphicsRAM
Core i5 4690K ASRock Z97 Extreme4 XFX Radeon 7950 32 GB DDR3-2133 
Hard DriveOptical DriveCoolingOS
Samsung 850 EVO SSD Samsung DVD/CD-writer Corsair Hydro H60 Windows 7 
MonitorMonitorPowerCase
ASUS PA248Q Dell U2412M XFX 850W Black Edition XXX Fractal Design Arc Midi 2 
CPUMotherboardGraphicsRAM
Pentium Dual Core E6700 MSI G41M-P33 Combo ATI HD4350 Kingston ValueRAM DDR3-1333 
RAMHard DriveOSMonitor
Kingston ValueRAM DDR3-1333 WD Caviar Blue Windows 7 64-bit Sony 32" TV set 
Case
Apex TX-381 
CPUGraphicsRAMHard Drive
Core i5 430M GT230M (1 Gb dedicated) 8 GB DDR3-1066 640 GB 
OSMonitor
Windows 7 Home Premium (64-bit) 15.6" 
  hide details  
Reply
post #2560 of 4653
Hey Walnut thanks for the answer... i already tried with others multipliers.. and i always look on memory frequency to dont go over ~1000

i found a bug on my bios.. i change multiplier value, but it dont change.. example, i tried what you said, 333x11.5 = 38xx, ok, and it dont booted.. so i restart and there it was showing 4162mhz... its mult 12.5..

so i tried again, and put multi 10x.. (10x333=3330) and it still 4162mhz...
i want to back to bios v.0608.. it dont support my cpu, but ithink its the best bios for p5n-e sli.. and when i try to downgrade, it says "Warning, The BIOS image cant use in this motherboars (the eeprom type imcompatible)."
zoieta PC
(13 items)
 
  
CPUMotherboardGraphicsRAM
E5200 @ 3700 Asus P5N-E SLI PowerColor HD4850 PLAY! G.Skill 2x2gb DDR2 800 @ 1000 
Hard DriveOSMonitorPower
2x160gb Samsung RAID-0 Vista 32 LG W2284F 22" Spire Rocketeer IV 600w 
CaseMouse
CooolerMaster CM690 Logitech Standart 
  hide details  
Reply
zoieta PC
(13 items)
 
  
CPUMotherboardGraphicsRAM
E5200 @ 3700 Asus P5N-E SLI PowerColor HD4850 PLAY! G.Skill 2x2gb DDR2 800 @ 1000 
Hard DriveOSMonitorPower
2x160gb Samsung RAID-0 Vista 32 LG W2284F 22" Spire Rocketeer IV 600w 
CaseMouse
CooolerMaster CM690 Logitech Standart 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › E5200 - Overclocking Thread