Overclock.net › Forums › Intel › Intel CPUs › E5200 - Overclocking Thread
New Posts  All Forums:Forum Nav:

E5200 - Overclocking Thread - Page 282

Poll Results: Should the thread name be changed to E5x00 Overclocking Thread

Poll expired: Jan 24, 2009  
  • 58% (39)
    Yes, Change it to E5x00 Overclocking thread
  • 41% (28)
    No, Lets keep it how it is
67 Total Votes  
post #2811 of 4653
Quote:
Originally Posted by kirayamato26 View Post
Depends on the chip, mine loves 1.3V+ VTT for some reason. I don't know if NB really stabilizes OCs or not, but my system feels a bit more stable with 1.2V NB than 1.1V NB.
What are you using to test stability?
My System
(15 items)
 
  
Reply
My System
(15 items)
 
  
Reply
post #2812 of 4653
I think I ran into one of the most funny problems, ever. I'm trying for 3.45GHz again, and right now, it can pass Linpack fine, but SuperPi Mod can't even run a single iteration of 1M. Any ideas?

Edit:
I use OCCT Linpack to test for initial stability, if it can pass for 12 hours, I then put it through 24 hours+ of OCCT.

Edit 2:

Ok, I officially deem this the dumbest problem ever. SuperPi Mod runs fine with Firefox open, however, with Firefox closed, it can't run. I feel like hitting my head on the desk now. Any suggestions?
Edited by kirayamato26 - 4/30/09 at 4:16pm
First Build
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Pentium E5200 3300MHz @ 1.3125V, 1.225V VID Gigabyte EP45-UD3L NVIDIA GeForce 9500GT Corsair TwinX 4096MB DDR2-800 
Hard DriveOptical DriveOSMonitor
Seagate Barracuda 7200.12 500GB TSST-Corp 16x DVD+/-RW W/ LightScribe Windows Vista Ultimate 32-bit Samsung SyncMaster 920NX & Dell 19" CRT 
KeyboardPowerCaseMouse
Compaq Stock Cooler Master 350W Cooler Master Elite 330 Compaq Stock 
Mouse Pad
Logitech 
  hide details  
Reply
First Build
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Pentium E5200 3300MHz @ 1.3125V, 1.225V VID Gigabyte EP45-UD3L NVIDIA GeForce 9500GT Corsair TwinX 4096MB DDR2-800 
Hard DriveOptical DriveOSMonitor
Seagate Barracuda 7200.12 500GB TSST-Corp 16x DVD+/-RW W/ LightScribe Windows Vista Ultimate 32-bit Samsung SyncMaster 920NX & Dell 19" CRT 
KeyboardPowerCaseMouse
Compaq Stock Cooler Master 350W Cooler Master Elite 330 Compaq Stock 
Mouse Pad
Logitech 
  hide details  
Reply
post #2813 of 4653
http://valid.canardpc.com/show_oc.php?id=553158

CPU Validation of my e5x00 serios overclock on EP45-UD3P.

Thats fully stable but at a extremely high voltage of 1.568volts my Xigmatek
s1284 can hand it withg 2 120s topping 80c at full 10 hours of orthose this chip is going to be replaced with q9550 because mobo and q9550 are realy and good match and can do 4.0Ghz once again on air.

Let me tell you this CHIP IS Insane it scores crazy! 3dmark06 16,495 marks cant proove cause i haz hacked 06 with a gtx 260 core 216

i can play every game at loltarded settings over 40 fps easily including crysis

19inch monitor here THIS CHIP RAPES! for 70 dollars i thought 3.5 was hardcore guess its unreal for 4.0Ghz <3 it!

Crysis: Run #1- DX9 1400x960 AA=No AA, 32 bit test, Quality: VeryHigh ~~ Last Average FPS: 61.78 Thats legit so Love it
Core 2 quad beast
(13 items)
 
  
CPUMotherboardGraphicsRAM
q9550 4.04Ghz 1.232volts 24/7. EP45-UD3P Hacked Sli. Galaxy GTX 470 OCZ DDR2 1066Mhz 4 gigs. 
Hard DriveOptical DriveOSMonitor
2x 250gb Seagate Hardrives RAID 0 115mb/s reads HP dvd1160 Windows XP32-64/Vista 32-64/Windows 7 32-64bit. Acer 19inch x193w 
KeyboardPowerCaseMouse
Logitech Lightup keyboard Corsiar TX 750w Antec 902 Microsoft Lazar 2.0 revision mouse 
Mouse Pad
My Desk 
  hide details  
Reply
Core 2 quad beast
(13 items)
 
  
CPUMotherboardGraphicsRAM
q9550 4.04Ghz 1.232volts 24/7. EP45-UD3P Hacked Sli. Galaxy GTX 470 OCZ DDR2 1066Mhz 4 gigs. 
Hard DriveOptical DriveOSMonitor
2x 250gb Seagate Hardrives RAID 0 115mb/s reads HP dvd1160 Windows XP32-64/Vista 32-64/Windows 7 32-64bit. Acer 19inch x193w 
KeyboardPowerCaseMouse
Logitech Lightup keyboard Corsiar TX 750w Antec 902 Microsoft Lazar 2.0 revision mouse 
Mouse Pad
My Desk 
  hide details  
Reply
post #2814 of 4653
Quote:
Originally Posted by kirayamato26 View Post
I think I ran into one of the most funny problems, ever. I'm trying for 3.45GHz again, and right now, it can pass Linpack fine, but SuperPi Mod can't even run a single iteration of 1M. Any ideas?

Edit:
I use OCCT Linpack to test for initial stability, if it can pass for 12 hours, I then put it through 24 hours+ of OCCT.

Edit 2:

Ok, I officially deem this the dumbest problem ever. SuperPi Mod runs fine with Firefox open, however, with Firefox closed, it can't run. I feel like hitting my head on the desk now. Any suggestions?




iTS vista . go slower as you press the buttons to load thetest...
uberputer
(13 items)
 
  
CPUMotherboardGraphicsRAM
e5200 375x11(4125mhz) @ 1.39V gigabyte ep45-ud3lr geforce 9600 gt @ ***750**1850**1100*** 8 Gigs ocz DDr2 800 @ 4-5-4-12 
Hard DriveOptical DriveOSMonitor
WD Caviar 160 + WD 100 dvdrw Vista Ultimate 64 bit toshiba 52 inch hdtv 
PowerCaseMouse
bfg 450 generic bluetooth keyboard w/ trackball 
  hide details  
Reply
uberputer
(13 items)
 
  
CPUMotherboardGraphicsRAM
e5200 375x11(4125mhz) @ 1.39V gigabyte ep45-ud3lr geforce 9600 gt @ ***750**1850**1100*** 8 Gigs ocz DDr2 800 @ 4-5-4-12 
Hard DriveOptical DriveOSMonitor
WD Caviar 160 + WD 100 dvdrw Vista Ultimate 64 bit toshiba 52 inch hdtv 
PowerCaseMouse
bfg 450 generic bluetooth keyboard w/ trackball 
  hide details  
Reply
post #2815 of 4653
Lol, wow, that actually works, thanks, up until now, I've just been rapid firing enter. Interesting, I found a sweet spot for voltages on my chip, I got 3.3GHz stable, 3.45GHz stable, nearly 3.6GHz, and 3.75GHz to boot on a record low voltage. The VCore that I used for all but the 3.75GHz boot were under 1.4V. I find that if I keep VTT and VMCH at a 0.06V difference (with VTT being the higher one), every single voltage drops in requirements. Maybe this will apply to some of you guys? I don't know, hope this helped in any way.
First Build
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Pentium E5200 3300MHz @ 1.3125V, 1.225V VID Gigabyte EP45-UD3L NVIDIA GeForce 9500GT Corsair TwinX 4096MB DDR2-800 
Hard DriveOptical DriveOSMonitor
Seagate Barracuda 7200.12 500GB TSST-Corp 16x DVD+/-RW W/ LightScribe Windows Vista Ultimate 32-bit Samsung SyncMaster 920NX & Dell 19" CRT 
KeyboardPowerCaseMouse
Compaq Stock Cooler Master 350W Cooler Master Elite 330 Compaq Stock 
Mouse Pad
Logitech 
  hide details  
Reply
First Build
(13 items)
 
  
CPUMotherboardGraphicsRAM
Intel Pentium E5200 3300MHz @ 1.3125V, 1.225V VID Gigabyte EP45-UD3L NVIDIA GeForce 9500GT Corsair TwinX 4096MB DDR2-800 
Hard DriveOptical DriveOSMonitor
Seagate Barracuda 7200.12 500GB TSST-Corp 16x DVD+/-RW W/ LightScribe Windows Vista Ultimate 32-bit Samsung SyncMaster 920NX & Dell 19" CRT 
KeyboardPowerCaseMouse
Compaq Stock Cooler Master 350W Cooler Master Elite 330 Compaq Stock 
Mouse Pad
Logitech 
  hide details  
Reply
post #2816 of 4653
Give reps for good Advice please.
uberputer
(13 items)
 
  
CPUMotherboardGraphicsRAM
e5200 375x11(4125mhz) @ 1.39V gigabyte ep45-ud3lr geforce 9600 gt @ ***750**1850**1100*** 8 Gigs ocz DDr2 800 @ 4-5-4-12 
Hard DriveOptical DriveOSMonitor
WD Caviar 160 + WD 100 dvdrw Vista Ultimate 64 bit toshiba 52 inch hdtv 
PowerCaseMouse
bfg 450 generic bluetooth keyboard w/ trackball 
  hide details  
Reply
uberputer
(13 items)
 
  
CPUMotherboardGraphicsRAM
e5200 375x11(4125mhz) @ 1.39V gigabyte ep45-ud3lr geforce 9600 gt @ ***750**1850**1100*** 8 Gigs ocz DDr2 800 @ 4-5-4-12 
Hard DriveOptical DriveOSMonitor
WD Caviar 160 + WD 100 dvdrw Vista Ultimate 64 bit toshiba 52 inch hdtv 
PowerCaseMouse
bfg 450 generic bluetooth keyboard w/ trackball 
  hide details  
Reply
post #2817 of 4653
Quote:
Originally Posted by W4LNUT5 View Post
Super PI does that to me too. Usually happens if I click its buttons too fast. Take it slow opening it, and it works fine. Idk
Quote:
Originally Posted by wes45013 View Post
iTS vista . go slower as you press the buttons to load thetest...
Quote:
Originally Posted by wes45013 View Post
Give reps for good Advice please.
As you can see, I clearly gave the advice first on pg 280

lol. But no one reads my posts, liek, ever. . .

Lolz. I'm going to go play some beer pong, later peeps
    
CPUMotherboardGraphicsRAM
I5-2500k 4.8Ghz @ 1.38v Z68X-UD4-B3 PNY 480 8GB Dominator 1600's 
Hard DriveOptical DriveOSMonitor
Intel 510 + 300GB Velociraptor LG DVD RW Server 2012 HP 25" + HP 20" 
KeyboardPowerCaseMouse
Deck Legend TX850W XClio Coolbox Mamba 
Mouse PadAudio
Dolica HD550's 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
I5-2500k 4.8Ghz @ 1.38v Z68X-UD4-B3 PNY 480 8GB Dominator 1600's 
Hard DriveOptical DriveOSMonitor
Intel 510 + 300GB Velociraptor LG DVD RW Server 2012 HP 25" + HP 20" 
KeyboardPowerCaseMouse
Deck Legend TX850W XClio Coolbox Mamba 
Mouse PadAudio
Dolica HD550's 
  hide details  
Reply
post #2818 of 4653
Quote:
Originally Posted by kirayamato26 View Post
Lol, wow, that actually works, thanks, up until now, I've just been rapid firing enter. Interesting, I found a sweet spot for voltages on my chip, I got 3.3GHz stable, 3.45GHz stable, nearly 3.6GHz, and 3.75GHz to boot on a record low voltage. The VCore that I used for all but the 3.75GHz boot were under 1.4V. I find that if I keep VTT and VMCH at a 0.06V difference (with VTT being the higher one), every single voltage drops in requirements. Maybe this will apply to some of you guys? I don't know, hope this helped in any way.


I thought excessive VTT will eventually kill your processor. By that I mean it should be kept under your vcore. Or am I missing something?
edit: OK so VMCH = North Bridge voltage - is that correct?
Anyone know the safe North Bridge Voltage limit on an E5200?
Edited by avkdm - 5/1/09 at 1:50am
My System
(15 items)
 
  
Reply
My System
(15 items)
 
  
Reply
post #2819 of 4653
TEMPS have got the best of me for now here my new oc.
uberputer
(13 items)
 
  
CPUMotherboardGraphicsRAM
e5200 375x11(4125mhz) @ 1.39V gigabyte ep45-ud3lr geforce 9600 gt @ ***750**1850**1100*** 8 Gigs ocz DDr2 800 @ 4-5-4-12 
Hard DriveOptical DriveOSMonitor
WD Caviar 160 + WD 100 dvdrw Vista Ultimate 64 bit toshiba 52 inch hdtv 
PowerCaseMouse
bfg 450 generic bluetooth keyboard w/ trackball 
  hide details  
Reply
uberputer
(13 items)
 
  
CPUMotherboardGraphicsRAM
e5200 375x11(4125mhz) @ 1.39V gigabyte ep45-ud3lr geforce 9600 gt @ ***750**1850**1100*** 8 Gigs ocz DDr2 800 @ 4-5-4-12 
Hard DriveOptical DriveOSMonitor
WD Caviar 160 + WD 100 dvdrw Vista Ultimate 64 bit toshiba 52 inch hdtv 
PowerCaseMouse
bfg 450 generic bluetooth keyboard w/ trackball 
  hide details  
Reply
post #2820 of 4653
I'm running 1.4 MCH no problems - max not sure but I'd be wary over 1.4
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E5200 @4.15ghz 1.34v idle MSI P45 Neo GTX260 XT 55nm 216 @774core ocz 1066 4gb 
Hard DriveMonitorPowerCase
Western Digital Sata 250gb Mitsubishi CRT 22" Corsair 600w 4x12v rails Dabs Value with 4 80mm fans 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E5200 @4.15ghz 1.34v idle MSI P45 Neo GTX260 XT 55nm 216 @774core ocz 1066 4gb 
Hard DriveMonitorPowerCase
Western Digital Sata 250gb Mitsubishi CRT 22" Corsair 600w 4x12v rails Dabs Value with 4 80mm fans 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › E5200 - Overclocking Thread