Overclock.net › Forums › Intel › Intel CPUs › E5200 - Overclocking Thread
New Posts  All Forums:Forum Nav:

E5200 - Overclocking Thread - Page 366

Poll Results: Should the thread name be changed to E5x00 Overclocking Thread

Poll expired: Jan 24, 2009  
  • 58% (39)
    Yes, Change it to E5x00 Overclocking thread
  • 41% (28)
    No, Lets keep it how it is
67 Total Votes  
post #3651 of 4653
Quote:
Originally Posted by madmike0408 View Post
you have an issue there. your temps shouldnt be 18 degrees different from each other. reseat your cooler ASAP.
I'm curious to what would happen if I don't reseat the cooler?
post #3652 of 4653
under load you might experience thermal throttling, or you can degrade the life of the chip running it at high temps such as 56 degrees Celsius at idle. I know your load temps are outrageous.
    
CPUMotherboardGraphicsRAM
Phenom II x3 720 Asus M3A32-MVP Deluxe 3x Visiontek 4850s 2x1gb generic crap, soon 2x1 Kingston Hyperx 
Hard DriveOptical DriveOSMonitor
2x80GB Hitachi raid-0 Samsung Sata Windows 7 1600x1200=Sadface 
PowerCase
Corsair 650tx Cooler master RC-331 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Phenom II x3 720 Asus M3A32-MVP Deluxe 3x Visiontek 4850s 2x1gb generic crap, soon 2x1 Kingston Hyperx 
Hard DriveOptical DriveOSMonitor
2x80GB Hitachi raid-0 Samsung Sata Windows 7 1600x1200=Sadface 
PowerCase
Corsair 650tx Cooler master RC-331 
  hide details  
Reply
post #3653 of 4653
Quote:
Originally Posted by A.C.Sanchez View Post
I see, interesting. Are you using the 250 MHz strap?
I've been alternating between them all, trying to keep it under 800Mhz until I get to my max fsb.
System v3.1
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9400 @ 3.45Ghz DFI LanParty LT X48-T2R 2x ATI 4770 + GT 220(Folding) 4GB GSkill DDR2 PC6400 @ 876MHz 
Hard DriveOSMonitorPower
Intel X25-V(OS) /160GB 7200RPM / 1TB 5200RPM Windows 7 Enterprise 64-bit 22" Asus LCD Corsair 650TX 
Case
Antec 300 
  hide details  
Reply
System v3.1
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9400 @ 3.45Ghz DFI LanParty LT X48-T2R 2x ATI 4770 + GT 220(Folding) 4GB GSkill DDR2 PC6400 @ 876MHz 
Hard DriveOSMonitorPower
Intel X25-V(OS) /160GB 7200RPM / 1TB 5200RPM Windows 7 Enterprise 64-bit 22" Asus LCD Corsair 650TX 
Case
Antec 300 
  hide details  
Reply
post #3654 of 4653
OK this might be as far as we can go with this chip. It hasn't proven to be the best overclocker for us, but it did give up some goods and we're going to keep trying.



My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E5200 @3.4 Abit IP35 Pro HD4850 GSkill DDR2 800 
Hard DriveOptical DriveOSMonitor
WD 320 GB LG Windows XP 32bit 19" 
PowerCase
OCZ StealthXStream 700W CM RC 690 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
E5200 @3.4 Abit IP35 Pro HD4850 GSkill DDR2 800 
Hard DriveOptical DriveOSMonitor
WD 320 GB LG Windows XP 32bit 19" 
PowerCase
OCZ StealthXStream 700W CM RC 690 
  hide details  
Reply
post #3655 of 4653
thats not too bad for those volts. i would go high with the volts , i like to keep it under 1.42(24/7) 1.45 max. at where your at you prolly will be able to get to 3.7 under1.42v.

just make sure you have your ram set to where thats not whats holding your oc back and you may need to up your mch/nb volts for some more stability
    
CPUMotherboardGraphicsRAM
e5200 lapped 3.9@1.44v(ugh summer) ga-ep45t-ud3p xfx4650 1gb ocz reaper DDR3 4gb(2x2) 1333 6-6-6-20 1.75v 
Hard DriveOSKeyboardPower
seagate barracuda 250gb XP pro IBM Model M coolermaster 1kw 
Case
apeiva x type full tower 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
e5200 lapped 3.9@1.44v(ugh summer) ga-ep45t-ud3p xfx4650 1gb ocz reaper DDR3 4gb(2x2) 1333 6-6-6-20 1.75v 
Hard DriveOSKeyboardPower
seagate barracuda 250gb XP pro IBM Model M coolermaster 1kw 
Case
apeiva x type full tower 
  hide details  
Reply
post #3656 of 4653
Hello all.
I buy a fourth E5200.

Some Batch Guide i recommend QxxxBxxx series cpus from Malay.
FPO/Batch - VID ~overclocking - vcore oc

forum.pclab.pl users E5200
*Q834B132 1,1375V 4,1GHz (1,3V) - sztuka "krzysiak"
*Q839B185 1,25V 4,2Ghz(1,3V) sztuka "mako222"
*Q827B677 VID 1,250 ~4,0Ghz -1,250 – MY E5200 -Kaszachris
Others
* Q832B418 - VID 1,0250 ~4,2Ghz - 1,272
* Q832B418 - VID 1,2000 ~4,0Ghz - 1,272
* 3827A299 - VID 1,1875 ~4,0Ghz - 1,340
* Q830B563 - VID 1,2000 ~4,0Ghz - 1,370 x2
* 3848A283 - VID 1,2000 ~4,0Ghz - 1,385
* 3833A245 - VID 1,1500 ~3,9Ghz - 1,385
* Q832A475 - VID 1,1500 ~3,8Ghz - 1,344
* Q827A565 - VID 1,2250 ~3,8Ghz - 1,375
* Q833A862 - VID 1,1375 ~3,7Ghz - 1,250
* 3832A711 - VID 1,1500 ~3,7Ghz - 1,232
* Q824A729 - VID 1,1000 ~3,7Ghz - 1.375
* 3828A962 - VID ~3,7Ghz - 1,400
* Q831B288 - VID 1.1750 ~3,6Ghz - 1,200
* 3828A509 - VID 1,1675 ~3,6Ghz -
* Q827A566 - VID 1,2250 ~3,5Ghz - 1,340
* 3833A333 - VID 1,2250 ~3,5Ghz - 1,375
* 3838B443 - VID 1,2250 ~3,5Ghz - 1,384
* 3834A612 - VID 1.2125 ~3,4Ghz - 1,306
* 3828A775 - VID 1,2250 ~3,4Ghz - 1,370
* 3828A771 - VID 1,2000 ~3,3Ghz - 1,300
* Q827A557 - VID 1,2125 ~3,3Ghz - 1,350
* Q833A285 - VID 1,2500 ~3,3Ghz - 1,360
* 3826A682 - VID 1,2500 ~3,3Ghz - 1,360
* 3827A299 - VID 1,2250 ~3,3Ghz – 1,375
* 3838B046 - VID ~3,6ghz -1,280V
*Q839B189 -VID 1.25. ~3,83ghz-1,25
4.0ghz 1,28v Q839B185(VID:1,25V)
3908A331 vid 1,285V 4ghz 1,29V Costa Rica

Othoss in progress :






Edited by kaszachris - 6/25/09 at 4:51pm
post #3657 of 4653
Quote:
Originally Posted by Lionmaster View Post
thats not too bad for those volts. i would go high with the volts , i like to keep it under 1.42(24/7) 1.45 max. at where your at you prolly will be able to get to 3.7 under1.42v.

just make sure you have your ram set to where thats not whats holding your oc back and you may need to up your mch/nb volts for some more stability
You advise 1.42 volts for 24/7 operation? I thought around 1.36 volts was the ceiling for these chips.
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
Q6600@3.4 DFI Lanparty DK P35 T2RS HIS IceQ HD7870 GHz Edition 2x2G G.Skill DDR2 1066 
Hard DriveOptical DriveCoolingOS
(1) WD 320GB, (1) WD 1TB Caviar Black, (1) WD ... Philips Noctua XP 
MonitorPowerCaseMouse
LG 20" lcd @ 1680x1050 Corsair TX750w Cooler Master RC 690 Logitech MX518 
  hide details  
Reply
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
Q6600@3.4 DFI Lanparty DK P35 T2RS HIS IceQ HD7870 GHz Edition 2x2G G.Skill DDR2 1066 
Hard DriveOptical DriveCoolingOS
(1) WD 320GB, (1) WD 1TB Caviar Black, (1) WD ... Philips Noctua XP 
MonitorPowerCaseMouse
LG 20" lcd @ 1680x1050 Corsair TX750w Cooler Master RC 690 Logitech MX518 
  hide details  
Reply
post #3658 of 4653
My E5200 1.7v @ Single Stage


http://valid.canardpc.com/show_oc.php?id=592294

My SuperPi 1M Score: 10.99s
Screenshot: http://www.hwbot.org/result.do?resultId=868101
Edited by VanDynck - 6/26/09 at 8:26am
post #3659 of 4653
Quote:
Originally Posted by Sparky6string View Post
You advise 1.42 volts for 24/7 operation? I thought around 1.36 volts was the ceiling for these chips.
1.3625 is the highest possible vid for a chip and the max spec intel recommends it to be set at, but the absolute maximum under intels specs that can be handled by the chip without degradation and electromigration damaging the chip is 1.45v i like keeping it under 1.42 just for safety
    
CPUMotherboardGraphicsRAM
e5200 lapped 3.9@1.44v(ugh summer) ga-ep45t-ud3p xfx4650 1gb ocz reaper DDR3 4gb(2x2) 1333 6-6-6-20 1.75v 
Hard DriveOSKeyboardPower
seagate barracuda 250gb XP pro IBM Model M coolermaster 1kw 
Case
apeiva x type full tower 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
e5200 lapped 3.9@1.44v(ugh summer) ga-ep45t-ud3p xfx4650 1gb ocz reaper DDR3 4gb(2x2) 1333 6-6-6-20 1.75v 
Hard DriveOSKeyboardPower
seagate barracuda 250gb XP pro IBM Model M coolermaster 1kw 
Case
apeiva x type full tower 
  hide details  
Reply
post #3660 of 4653
Quote:
Originally Posted by Lionmaster View Post
1.3625 is the highest possible vid for a chip and the max spec intel recommends it to be set at, but the absolute maximum under intels specs that can be handled by the chip without degradation and electromigration damaging the chip is 1.45v i like keeping it under 1.42 just for safety
Nice. We have our voltage there for safety's sake but we didn't notice a lot more OCing headroom when it was set higher. I think the sweet spot on that chip is 3.3 actually. Maybe we'll try again.
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
Q6600@3.4 DFI Lanparty DK P35 T2RS HIS IceQ HD7870 GHz Edition 2x2G G.Skill DDR2 1066 
Hard DriveOptical DriveCoolingOS
(1) WD 320GB, (1) WD 1TB Caviar Black, (1) WD ... Philips Noctua XP 
MonitorPowerCaseMouse
LG 20" lcd @ 1680x1050 Corsair TX750w Cooler Master RC 690 Logitech MX518 
  hide details  
Reply
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
Q6600@3.4 DFI Lanparty DK P35 T2RS HIS IceQ HD7870 GHz Edition 2x2G G.Skill DDR2 1066 
Hard DriveOptical DriveCoolingOS
(1) WD 320GB, (1) WD 1TB Caviar Black, (1) WD ... Philips Noctua XP 
MonitorPowerCaseMouse
LG 20" lcd @ 1680x1050 Corsair TX750w Cooler Master RC 690 Logitech MX518 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › E5200 - Overclocking Thread