Originally Posted by miloshs
I know the board itself can do over 500FSB... the whole time im talking about P5Q+E5200 in combination... Have you ever ran an E5200 at 500FSB on this board?
Nope i havent tried GTL settings.Dont really understand what those are for so i didnt want to mess with them just yet.Isn't 1.7V a little too much for SB that runs on 1.1V by default?
I havent touched ram timings but i did lower ram speed to as low as it can go... i thinks 347x2= 694Mhz
I ran NB at 1.3V (or dod you mean to run SB at 1.7V and NB at 1.3V together?) and SB at 1.3V... chip all the way to 1.63V BIOS (1.59V WinXP)... Would bringing CPU PLL to 1.7V have any effect, or is 1.7V too high for PLL?
i've been running my SB at 1.7 for months, bios says 1.5 min, 1.7 max ? haven't got any problems. gtl reference volts is something to do with reducing the "background noise" when processing afaik, i dont really know what they are, just that you need to increase them.
i've got my quad running in it at 440fsb atm, so the bottlneck isn't there.. thats all i was saying.
i haven't touched my pll volts at all. nb is at 1.4 for 440fsb.