Overclock.net › Forums › Case Mods & Cases › Computer Cases › The Official Cooler Master HAF X/932/922/912(+) Club
New Posts  All Forums:Forum Nav:

The Official Cooler Master HAF X/932/922/912(+) Club - Page 1444

post #14431 of 23525
Quote:
Originally Posted by Ceadderman View Post
Just do like I did and pull them if they become a nuisance. I got a set of Black thumbscrews. They came 10 to a pack so I replaced every clip, the PSU stand thumbscrew, and 2 of the back thumbscrews. Soon as I can clear a little more, I'll be buying another kit and giving my Bro what I don't use which will at least clear his clips out of his Case.

The reason I changed them out was cause I broke one of the ends off the top clip so it didn't match the rest. For some reason the clips in my Bros system works properly with his dual slot card. Not so much with mine. I had to wiggle the card to get it to lock in properly. When it broke that was the last straw. Got thumbscrews and will never use those things again. Great design in theory. Not so much in application.

~Ceadder
What exactly do the replacement thumbscrews allow for, say, in my situation?
post #14432 of 23525
Quote:
Originally Posted by Infinite Jest View Post
What exactly do the replacement thumbscrews allow for, say, in my situation?
I can't rightly say other than it may help clear up your issue as well. This is assuming of course that the holes don't align with one another properly. You might have another go at securing your MoBo; loosening the screws and giving the board a gentle push in the direction the hole needed to align the two match properly. That's if it's slightly off center. The threaded shafts of the thumscrews are fairly small so your board may not need to be repositioned at all.

And to answer your other question abot the DEMCiFlex filter kit; Yes they do have one for the bottom as well but it comes in the kit. They now also have(separately purchased) a front filter that secures to the front. Not sure if it's meant to go over or under the face plate. I'd assume over since it would be a royal pain in the ass to remove the face plate every time you had to clean the bloody thing. So it would have to have something like my GPU filter has to filter the air being sucked in through the hamster wheel. Apply the magnetic capable strips before the filter and it goes on easy peasy.



~Ceadder
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
post #14433 of 23525
Quote:
Originally Posted by Ceadderman View Post
Nice. Use some Zips to hold the UV into place, ya cheapskate.

~Ceadder
no, im going to leave it long because I plan to eventually put a small rad there maybe a 80mm or something so I can have cooling in between my video cards
post #14434 of 23525
The hafx heatsink hole isn't large enough to uncover all the backplate in my R3E
Sovereign
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770k Maximus V Gene HIS IceQ 7950 16gb Samsung  
Hard DriveCoolingOSMonitor
Samsung 840 120gb H80i Windows 7 x64 Benq XL2420T 
PowerCaseMouseMouse Pad
Seasonic 1000 Platinum TJ08e Mionix Naos 5000 Propus 380 
Audio
Creative ZxR 
  hide details  
Reply
Sovereign
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 3770k Maximus V Gene HIS IceQ 7950 16gb Samsung  
Hard DriveCoolingOSMonitor
Samsung 840 120gb H80i Windows 7 x64 Benq XL2420T 
PowerCaseMouseMouse Pad
Seasonic 1000 Platinum TJ08e Mionix Naos 5000 Propus 380 
Audio
Creative ZxR 
  hide details  
Reply
post #14435 of 23525
Quote:
Originally Posted by THC Butterz View Post
no, im going to leave it long because I plan to eventually put a small rad there maybe a 80mm or something so I can have cooling in between my video cards
?

Why would you do that when you could just as easily mount a 140mm Rad to the case exhaust area in the back of the case?

That's how I plan to do my setup for just one card...

Pump>GPU>140>NB out SB>CPU>360 and back down to the Pump/Res Combo. You could set it up this way sending the 140 to your second card and then out from there to the next flow point.

You shouldn't have a heat issue running SLI kit with that much space between your cards. You might look into getting backplates to help wick away heat but a small radiator in between is kinda different, not to mention noiser if you plan on adding a fan to it. Since you already have a 140 might as well put it to better use with a Radiator although larger than you intend to purchase. Just need a shroud to keep it quiet.

~Ceadder
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
post #14436 of 23525
Quote:
Originally Posted by Ceadderman View Post
Why would you do that when you could just as easily mount a 140mm Rad to the case exhaust area in the back of the case?
That looks ridiculously ugly.

(Or it does for OCD people like me)
post #14437 of 23525
Guys I have a problem. With my front panel, whenever I plug in a USB device or plug in my earphones it will short the system and it restarts. Any idea guys? I have double checked my front panel connectors and they are all plugged in correctly.
AMD Rig
(18 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom II X4 965 BE C3 3.8 GHz 1.4v Gigabyte MA790XT-UD4P Sapphire HD 5770 Vapor-X Overclock Edition 8 GB DDR3 1600 CL9 Kingston HyperX Genesis 
RAMHard DriveHard DriveHard Drive
4 GB DDR3 1600 CL9 G Skill Ripjaws 64 GB Crucial M4 2TB Western Digital Caviar Green 1TB Western Digital Caviar Black 
Optical DriveCoolingOSMonitor
LG Lightscribe DVD burner Corsair H60 Windows 7 Home Premium 64 Bit Service Pack 1 Samsung SyncMaster 2494HM (1920x1080) 
KeyboardPowerCaseMouse
Logitech G15 Corsair TX750W CoolerMaster HAF 932 AMD Edition CM Storm Spawn 
Mouse PadAudio
Steelseries QcK Heavy Asus Xonar DG 
  hide details  
Reply
AMD Rig
(18 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom II X4 965 BE C3 3.8 GHz 1.4v Gigabyte MA790XT-UD4P Sapphire HD 5770 Vapor-X Overclock Edition 8 GB DDR3 1600 CL9 Kingston HyperX Genesis 
RAMHard DriveHard DriveHard Drive
4 GB DDR3 1600 CL9 G Skill Ripjaws 64 GB Crucial M4 2TB Western Digital Caviar Green 1TB Western Digital Caviar Black 
Optical DriveCoolingOSMonitor
LG Lightscribe DVD burner Corsair H60 Windows 7 Home Premium 64 Bit Service Pack 1 Samsung SyncMaster 2494HM (1920x1080) 
KeyboardPowerCaseMouse
Logitech G15 Corsair TX750W CoolerMaster HAF 932 AMD Edition CM Storm Spawn 
Mouse PadAudio
Steelseries QcK Heavy Asus Xonar DG 
  hide details  
Reply
post #14438 of 23525
I have all of my fans, including the case fans, connected to my mobo. My case fans are running at extremely low rpms. Are these fans too big for the mobo to power? What do most of you do? Connect case fans to psu? use a fan controller?
Sexy Sandy
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-2600K Gigabyte Z68X-UD5 MSI GTX 580 LIGHTNING G.SKILL Ripjaws X Series 8GB (2 x 4GB) 
Hard DriveOptical DriveCoolingOS
Crucial M4 128GB+Samsung Spinpoint F3 1TB+Seaga... LITE-ON DVD Burner Noctua NH-D14 Windows 7 64-bit 
MonitorPowerCaseAudio
BenQ xl2410t Corsair 850HX Cooler Master HAF-X  Asus Xonar DG 
  hide details  
Reply
Sexy Sandy
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-2600K Gigabyte Z68X-UD5 MSI GTX 580 LIGHTNING G.SKILL Ripjaws X Series 8GB (2 x 4GB) 
Hard DriveOptical DriveCoolingOS
Crucial M4 128GB+Samsung Spinpoint F3 1TB+Seaga... LITE-ON DVD Burner Noctua NH-D14 Windows 7 64-bit 
MonitorPowerCaseAudio
BenQ xl2410t Corsair 850HX Cooler Master HAF-X  Asus Xonar DG 
  hide details  
Reply
post #14439 of 23525
Quote:
Originally Posted by YangerD View Post
Guys I have a problem. With my front panel, whenever I plug in a USB device or plug in my earphones it will short the system and it restarts. Any idea guys? I have double checked my front panel connectors and they are all plugged in correctly.
Check your USB connections to see if they have some bare spots. It's a good opportunity to give the pcb a once over to see if there may be some bad channels in it as well.

Quote:
Originally Posted by Kreeker View Post
I have all of my fans, including the case fans, connected to my mobo. My case fans are running at extremely low rpms. Are these fans too big for the mobo to power? What do most of you do? Connect case fans to psu? use a fan controller?
No. All my fans but two 120s' are connected to my MoBo. Your board should easily handle any fan you plug into it.

Quote:
Originally Posted by kiwiasian View Post
Quote:
Originally Posted by Ceadderman
Pump>GPU>140Exh Rad>NB flowing to SB>CPU>360> Back to Pump/Res Combo Start point...
That looks ridiculously ugly.

(Or it does for OCD people like me)
If done right it should look magnificent. My OCD errs on the side of Overkill.

~Ceadder
Edited by Ceadderman - 6/15/11 at 6:31pm
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
post #14440 of 23525
Quote:
Originally Posted by Ceadderman View Post
No. All my fans but two 120s' are connected to my MoBo. Your board should easily handle any fan you plug into it.
Can you tell me why my case fan speed stays constant even when the computer is under load? 300 rpms is painfully slow...

Sexy Sandy
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-2600K Gigabyte Z68X-UD5 MSI GTX 580 LIGHTNING G.SKILL Ripjaws X Series 8GB (2 x 4GB) 
Hard DriveOptical DriveCoolingOS
Crucial M4 128GB+Samsung Spinpoint F3 1TB+Seaga... LITE-ON DVD Burner Noctua NH-D14 Windows 7 64-bit 
MonitorPowerCaseAudio
BenQ xl2410t Corsair 850HX Cooler Master HAF-X  Asus Xonar DG 
  hide details  
Reply
Sexy Sandy
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7-2600K Gigabyte Z68X-UD5 MSI GTX 580 LIGHTNING G.SKILL Ripjaws X Series 8GB (2 x 4GB) 
Hard DriveOptical DriveCoolingOS
Crucial M4 128GB+Samsung Spinpoint F3 1TB+Seaga... LITE-ON DVD Burner Noctua NH-D14 Windows 7 64-bit 
MonitorPowerCaseAudio
BenQ xl2410t Corsair 850HX Cooler Master HAF-X  Asus Xonar DG 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › The Official Cooler Master HAF X/932/922/912(+) Club