Originally Posted by Jeppzer;14284356
1. Open the sidepanels
2. reach up, inside tha case there are 6 clips, push them outwards.
3. Lift top.
4. Clean fan.
To replace it, just align it and push it down.
the back clip on the inside actually goes the other way but you get the point,
Anyway, I've removed the front mesh from my case, stripped and sanded it all execpt the hot swap mesh witch is soaking in the stripper now, after that im going to do my top mesh, and it will go into primmer tonight, then paint tomarrow and clear after that, would do a worklog but the paint stripper im using is some powerfull stuff and i already have some sirious chemical burns and dont want to dammage my camera but the color i've chosen is a gloss finish enamel banner red, I think it will look great when im done, the only downside is all the dust dumping into my system while i've got my mesh off:D
update: still havent taken off top because its a bit harder than the front with my rad in the way and all, but all front mesh is currently in primer
update 2: soaking my top mesh overnight, added second coat of primmer to front mesh, will continue tommarowEdited by THC Butterz - 7/20/11 at 11:37pm