Originally Posted by Ceadderman;15011319
Hey CM MR HAF, I just realized what I need to axe you. When are you going to have AMD Edition bits in CMStore? I need the Phenom Grill and Badge but you guys don't offer that. Is there any way a guy could lay his hands on one?
The solution is to Cooler Master Store and ask to buy the HAF 932 AMD edition front fan grill and red side trim if you want. If you ask nicely they could sell them to you.
Originally Posted by ZombieEinstein;15014221
One thing I know I'd like to see are some accessories for the front panel on the HAF X (Like a USB 3.0 Direct-to-Mobo-header wire - the cables provided are nice while most people are still limited to external ports, but 3.0 should become standard onboard tech when Ivy Bridge drops in a few months), I know I would also like to see solid feet for the HAF X (not the casters - I like my computer to only move when I really want it to, namely, when I pick it up and carry it).
Oh, a 5.25"-3.5" converter for the front bays. Too many memory card readers only fit 3.5", and if they do come with a converter, they either a) POSs b)stick out like a sore thumb on a HAF case c)both
A full window side panel for the HAF X - I know some of here just cut our own, and other don't want to/don't have time to/don't feel like it and just wish a full-window version existed. And since you can see a lot of us make use of the water cooling options, or are operating on positive air-pressure, the loss of 1 200mm fan (out of what, 4? plus a 140 in back) won't kill us too much heat-wise.
All new HAF X and HAF 932 Advanced have the USB 3.0 internal connector. For the HAF X, good idea about the 3.5" adapter. Finally, you can order a HAF 932 full window panel and install it on a HAF X.
Originally Posted by eskamobob1;15014248
I absolutely love your cases and recommend them all of the time... My only trouble with them is full water-cooling... Really only 3 requests for this
1) make the HDD bays in the HAF X easily removable (with screws or something) so that you can stack a 240 on a 360 for full WC
2) do the same style intake you use for the PSU on the X all of the way up to the front of the case
3) put hinges on the 932 so people don't have to worry about pulling on the tubes when they take off their side panel and have rads on it (the ability to fit a 240x240 rad on the side panel was a really good feature IMO)
Other than this, I have never realy had any other things I want to change about your cases
I just wish you guys had a cube (but Ik how small the market is)
1) All I can say are HDD bays on a future chassis will be better than you imagine, but its not a HAF.
2) If you mean the PSU cable cover, it might be a good idea, but how would it attach to the chassis in a firm way?
3) I've seen this before, its possible
Originally Posted by waltcujo;15014640
you should definatly add a usb 3 bracket to the front of the case
All HAF X owners with external cables can do a parts request from the CMUSA store for this and recieve it in 3-6 weeks.
Originally Posted by scaz;15016402
I love the idea of removable motherboad trays. I would be cool to make a brand that had thicker medal and acrylic. I don't think that the 4x120mm option is going to be a big seller. However if you did make a case where one side had the motherboard and on the other side you can put rads, hard drives, and powersupplys for those really high end builds woud be cool.
The issue with the removable motherboard tray we found out with the ATCS 840 is that people are lazy. Would you redo your cable management whenever you remove your motherboard? Good idea, looking for more feedback on this. A chassis has to be designed around a removable motherboard tray because it has to be strong enough to have the whole middle section missing and not warp or collapse.
Thanks for the questions, hopefully the answers are helpful.Edited by CM MR HAF - 9/21/11 at 1:45pm