Originally Posted by kromar
hi all, im planing to buy a 932 for my new h2o setup and i have some questions about it.
1. i know i can fit a 360 radiator inside the case and seen some pictures where someone had a single rad at the bottom. is that the maximum that will fit inside the case without modifications or is there room for a 2nd 360 or 240 inside the case?
2. what about the fill port at the top? is there already a connection for tubing or do i need some special parts for that?
you can do another rad, but as tank mentioned you'll need to modify your haf, i did a front mount 360. also i did install a single 120 rad where the 140mm sits for my first wc setup, pretty straightforward but a single rad is kinda on the weak side imho. if you want to avoid major mods, try and extreme 360 rad or swiftech has those stackable 360 rads if you must have two rads.
Fillport design is not usefull imho, it did not allow for air to escape and flooded several times for my setup, if you can run second line to allow air to escape from your res then you can run a line to the fill port. good luck
as u can see lots of space sacrifice
update: bought a lil siphon to make it easier to fill res, gonna have to dump everything and remove stuff, I fitted my radiator fans incorrectly Edited by wermad - 4/9/10 at 12:44pm