How much room do you have available? Can you go 22" tall or are you having to fit it under a low desk?
Cause the 922 is pretty decent. But the 932 is better depending on where you mount your PSU.
On the bottom you'll more than likely need a 20/4 pin extension and 4 or 8 pin extension.
Top mount you shouldn't need either. Though top mount you lose your upper 230mm.
It's not cheap though but sometimes you can get good deals from Newegg.
Right now you can get the 922 for $160 w a 500w PSU. If you like CM models though.
For $139 after $20 rebate you could get a FT HAF 932. I don't recommend the red version though since it comes with only one Red LED fan.
But the *Blue*
HAF 932 that is solely sold by Newegg and no other source is also $160 as the 922 is.
But neither have PSUs'. If you can get along without a PSU, I would suggest bumping up. You will LOVE the ability to sleep in your case if you wanted to.
I hate CM but they made a near indestructible case. It's a nice change after having too much experience with flimsily built cases.
Here's a link for the Red 932 version just for specs purposes unless you are set on Red of course.
After looking at that 900, I would definitely sell that and move into a HAF. Is it me or did Antec not think about tooless design much. I mean you have 120s' in the HDD rack mounted with adapters that are held in with thumbscrews. But no clips for the HDDs' or the 5.25s'?
Don't get me wrong I'm not ripping your case selection so much as I am pointing out a serious design flaw. Antecs' are NORMALLY much better than that.
Edited by Ceadderman - 4/15/10 at 12:52pm
Originally Posted by Ikthus
Hey guys, I've been eying on getting a 922 case for a couple days now. I sadly did not do enough googling when I bought my Antec 900 case and after finding out how terrible the cable management is I've got some serious buyer's remorse lol.
So what do you guys think? Sell off my 900 and make the switch?