Originally Posted by Squirrel
Cheers, do you have any tips on how to paint it (properly)?
I'm wondering whether I should sand my HAF 932 etc after painting it, or whether I can just apply the paint and leave it at that?! Sorry, don't know much about painting
you just opened up a can of worms
some scuff the interior w/ a metal pad (ie scotch brite) or sand it w/ fine grit to roughen up the surface, primer and paint.
some strip if down to bare metal (its powder coated and its hella tough, you'll need chemical striper and or some sort of wire brush/cup on a rotary tool, if possible). primer, then paint. this is a very long & arduous process (I would know
some will just paint over the parts w/ no other input. mostly likely to chip though.
if any one else has any other suggestion, pls add, tnx
btw, I use Krylon, didnt have a good experience w/ Rust-oleumEdited by wermad - 4/29/10 at 5:30pm