Okay in order to answer the above question about mounting the H50 AND the 23cm fan I had to really dig for this. It's on page 53 at the top. But here you go.
Originally Posted by sintricate
You mean like this?
That worked fine for me but I have since then mounted it in the drive bays since I added different/more fans.
As you can see it indeed fits there. If you add basically two fans to the bottom of that setup you will lose 3 bays. But it won't matter, if you use them for fan and or media controllers where the mounting depth is shallow. I'm going to be mounting an FC3 type controller and a dual bay media controller so I'm good with this. Or you can set it up as it is above with intake w/o filter. I suggest exhaust since it is a HAF it's in though.
Originally Posted by andrew149
A little update of the rig
my pump will be mounted in the tank tmw =]
I don't know about the stacked Rads in the top but I really like that bracket on the back giving that Rad clearance to mount fans and allowing them to breathe.
What is the rating of your pump? I would think that you're pushing the envelope with that setup.
~CeadderEdited by Ceadderman - 5/19/10 at 6:18pm