Overclock.net › Forums › Cooling › Water Cooling › The Official Bong Lovers Club {56k FAIL}
New Posts  All Forums:Forum Nav:

The Official Bong Lovers Club {56k FAIL} - Page 72

post #711 of 1335
OK Mike, so what are your temps while running OCCT and what is the ambient? You report 30C on your socket at idle? Are you sure that is not your nb temp? It sounds like a nb temp to me... BUT if that is your cpu socket temp then it does seem a little higher than I'd expect - from a core2. Have never used an i7 so.... will have to look at temps listed by others. You are also not listing your 1. ambient temp and 2. water temp. Do you have a thermostat yet to take these readings?

edit:
Quote: Anyhow, @ 4.01GHz on the CPU, 855MHz core/1105MHz mem on the GPU, and full load, I'm hitting 67C according to RealTemp. At idle I'm still seeing 36C on the highest core. According to the BIOS HW monitor, my socket temp is 30C at idle. ---

Mike, have you read this thread? http://www.overclock.net/water-cooli...blocks-i7.html If you locate your block on there, you will see test results claim a 32.8C difference on average between cpu core temp and the water temp. Hopefully you will have a thermometer to measure your water temps soon.

If those results are correct you would have 34 to 35C water temps - which is very high. I think your water to core temp delta is higher than found in the testing.

However you are clocked to 4ghz. He was at 3.7GHz, 1.28V - try dropping your clock down to that and compare results.
Edited by nub - 11/6/09 at 8:30pm
Stumpy
(13 items)
 
  
CPUMotherboardGraphicsRAM
A10 5800k gigabyte  7970 mushkin ddr3  
Hard DriveOSPower
intel ssd Win7 64 Corsair TX850W 
  hide details  
Reply
Stumpy
(13 items)
 
  
CPUMotherboardGraphicsRAM
A10 5800k gigabyte  7970 mushkin ddr3  
Hard DriveOSPower
intel ssd Win7 64 Corsair TX850W 
  hide details  
Reply
post #712 of 1335
Well, I'm about to enter the wonderful world of bongs. I have my PVC and fittings all laid out and my pump and waterblocks will be here by next weekend. I am going with a 5' tall 4" diameter bong with a YL low speed fan. I got me a $2.98 economy shower head to go at the top too .

I have been lurking in this thread for a while and I have an idea on how to make a pretty bong. Someone brought up the idea of plexi sheets with aluminum angle stock to join the sides. I know that acrylic can be "welded" with solvent and the sides can even be polished up and rounded if desired and you cannot even see a seam. Tons of people build acrylic fishtanks and sumps (a tank-like type of filter) and I've seen some towers of acrylic (for filtering purposes) but I know the same principle oculd be applied to building a bong.

Basically, get some plexi sheets (they are very reasonably priced) and solvent welb them together in a long tower, at the bottom you could easily make a tank the same way and even have a kind of "shelf" that the tower sets on so it doesn't have to be permanently joined to the tank. I have seen aquarium filters built very much like this only their tower holds filter media and the tank is a kind of reservoir and the pump sits in it.
Black Box V2
(11 items)
 
  
CPUMotherboardGraphicsGraphics
i7 920 D0 @ 4.1GHz Foxconn Bloodrage NVIDIA GTX 580 NVIDIA GTX 580 
MonitorKeyboardPowerCase
ACER HN274H 27" 120Hz 3D Logitech PC Power & Cooling 950W MkII Lian Li PC-A77B 
MouseMouse PadAudio
Logitech G5 Generic  SONAR X-Fi 
  hide details  
Reply
Black Box V2
(11 items)
 
  
CPUMotherboardGraphicsGraphics
i7 920 D0 @ 4.1GHz Foxconn Bloodrage NVIDIA GTX 580 NVIDIA GTX 580 
MonitorKeyboardPowerCase
ACER HN274H 27" 120Hz 3D Logitech PC Power & Cooling 950W MkII Lian Li PC-A77B 
MouseMouse PadAudio
Logitech G5 Generic  SONAR X-Fi 
  hide details  
Reply
post #713 of 1335
well i'm glad more and more people are finally jumping on the bong bandwagon

now if only my thread hadn't been friggen DELETED
T3h_Fap_Machine
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 @ 3.2GHz FFFFF Gigabyte EP45-UD3P HD5770 1GB 2x2GB Corsair Dominator 1066MHz 
Hard DriveOptical DriveOSMonitor
Samsung F3 1TB + WD 3200AAKS LG Super multi something Windows 7 Home Premium x64 BenQ 22" 1080p 40000DCR 5ms 
KeyboardPowerCaseMouse
crappy gigabyte 430W Antec Truepower Trio CM 690 (modded) Razer Diamondback 3G Flame Red 
Mouse Pad
Razer Goliathus Omega Speed Edition 
  hide details  
Reply
T3h_Fap_Machine
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 @ 3.2GHz FFFFF Gigabyte EP45-UD3P HD5770 1GB 2x2GB Corsair Dominator 1066MHz 
Hard DriveOptical DriveOSMonitor
Samsung F3 1TB + WD 3200AAKS LG Super multi something Windows 7 Home Premium x64 BenQ 22" 1080p 40000DCR 5ms 
KeyboardPowerCaseMouse
crappy gigabyte 430W Antec Truepower Trio CM 690 (modded) Razer Diamondback 3G Flame Red 
Mouse Pad
Razer Goliathus Omega Speed Edition 
  hide details  
Reply
post #714 of 1335
Thread Starter 
... That sucks bro! Contact Ira-k and see what happened...I know he is a bong lover as well. Also an admin that watches this thread pretty close.
Bong Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6750 @3.6 1.40v P5N-D SLI 750i EVGA 9800GX2 4Gigs G.Skill 800 
Hard DriveOptical DriveOSMonitor
40G WD IDE/250G sata 40xDVDRW Vista 64bit 22" hp A4576A 
KeyboardPowerCaseMouse
Logitech Antec 650w Neopower herbal green Logitech 
Mouse Pad
Rotting blue/black neo 
  hide details  
Reply
Bong Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6750 @3.6 1.40v P5N-D SLI 750i EVGA 9800GX2 4Gigs G.Skill 800 
Hard DriveOptical DriveOSMonitor
40G WD IDE/250G sata 40xDVDRW Vista 64bit 22" hp A4576A 
KeyboardPowerCaseMouse
Logitech Antec 650w Neopower herbal green Logitech 
Mouse Pad
Rotting blue/black neo 
  hide details  
Reply
post #715 of 1335
yeah i did, this was a while ago. He suggested appealing for it to be undeleted. I QQ'd and didn't bother.
T3h_Fap_Machine
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 @ 3.2GHz FFFFF Gigabyte EP45-UD3P HD5770 1GB 2x2GB Corsair Dominator 1066MHz 
Hard DriveOptical DriveOSMonitor
Samsung F3 1TB + WD 3200AAKS LG Super multi something Windows 7 Home Premium x64 BenQ 22" 1080p 40000DCR 5ms 
KeyboardPowerCaseMouse
crappy gigabyte 430W Antec Truepower Trio CM 690 (modded) Razer Diamondback 3G Flame Red 
Mouse Pad
Razer Goliathus Omega Speed Edition 
  hide details  
Reply
T3h_Fap_Machine
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 @ 3.2GHz FFFFF Gigabyte EP45-UD3P HD5770 1GB 2x2GB Corsair Dominator 1066MHz 
Hard DriveOptical DriveOSMonitor
Samsung F3 1TB + WD 3200AAKS LG Super multi something Windows 7 Home Premium x64 BenQ 22" 1080p 40000DCR 5ms 
KeyboardPowerCaseMouse
crappy gigabyte 430W Antec Truepower Trio CM 690 (modded) Razer Diamondback 3G Flame Red 
Mouse Pad
Razer Goliathus Omega Speed Edition 
  hide details  
Reply
post #716 of 1335
Thread Starter 
Strange...any idea why it was deleted?
Bong Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6750 @3.6 1.40v P5N-D SLI 750i EVGA 9800GX2 4Gigs G.Skill 800 
Hard DriveOptical DriveOSMonitor
40G WD IDE/250G sata 40xDVDRW Vista 64bit 22" hp A4576A 
KeyboardPowerCaseMouse
Logitech Antec 650w Neopower herbal green Logitech 
Mouse Pad
Rotting blue/black neo 
  hide details  
Reply
Bong Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
E6750 @3.6 1.40v P5N-D SLI 750i EVGA 9800GX2 4Gigs G.Skill 800 
Hard DriveOptical DriveOSMonitor
40G WD IDE/250G sata 40xDVDRW Vista 64bit 22" hp A4576A 
KeyboardPowerCaseMouse
Logitech Antec 650w Neopower herbal green Logitech 
Mouse Pad
Rotting blue/black neo 
  hide details  
Reply
post #717 of 1335
apparently the flaming was getting out of hand. Of course, a lock wouldn't have stopped that

note i didn't read the last few pages of posts because i went to bed, and when i woke up, it was deleted.
T3h_Fap_Machine
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 @ 3.2GHz FFFFF Gigabyte EP45-UD3P HD5770 1GB 2x2GB Corsair Dominator 1066MHz 
Hard DriveOptical DriveOSMonitor
Samsung F3 1TB + WD 3200AAKS LG Super multi something Windows 7 Home Premium x64 BenQ 22" 1080p 40000DCR 5ms 
KeyboardPowerCaseMouse
crappy gigabyte 430W Antec Truepower Trio CM 690 (modded) Razer Diamondback 3G Flame Red 
Mouse Pad
Razer Goliathus Omega Speed Edition 
  hide details  
Reply
T3h_Fap_Machine
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 @ 3.2GHz FFFFF Gigabyte EP45-UD3P HD5770 1GB 2x2GB Corsair Dominator 1066MHz 
Hard DriveOptical DriveOSMonitor
Samsung F3 1TB + WD 3200AAKS LG Super multi something Windows 7 Home Premium x64 BenQ 22" 1080p 40000DCR 5ms 
KeyboardPowerCaseMouse
crappy gigabyte 430W Antec Truepower Trio CM 690 (modded) Razer Diamondback 3G Flame Red 
Mouse Pad
Razer Goliathus Omega Speed Edition 
  hide details  
Reply
post #718 of 1335
Quote:
Originally Posted by T3h_Ch33z_Muncha View Post
apparently the flaming was getting out of hand. Of course, a lock wouldn't have stopped that

note i didn't read the last few pages of posts because i went to bed, and when i woke up, it was deleted.
This is why i think people should use the blogs for build logs and such you can link the to whoever and put them in your sig etc etc but it doesn't get traffic from idiots. Did irak-i get back to you? he's a sound guy should sort you out
One gear, GO!
(14 items)
 
  
CPUMotherboardRAMHard Drive
FX8150 Crosshair V Formula G.Skill PIS 2200 cl7 Acard ans9010 raid 0+Corsair Force 3 
Cooling
OCN Marksman 
  hide details  
Reply
One gear, GO!
(14 items)
 
  
CPUMotherboardRAMHard Drive
FX8150 Crosshair V Formula G.Skill PIS 2200 cl7 Acard ans9010 raid 0+Corsair Force 3 
Cooling
OCN Marksman 
  hide details  
Reply
post #719 of 1335
I am going to go ahead and build my tower and leak test it as well as I can and await the arrival of the pump on Friday and proceed with proper leak testing and final assembly then. At seven feet of head the pump should put out 120 gph, that is 5 1/2' for the tower and then a couple more feet for block pressure and reduction fittings, hose barbs, etc. In the end I should come out with a higher flow rate than many people get using a DDC pump and radiators. The high flow should, 1) give me better temps due to a better turnover rate in the tower; 2) let me add more blocks in series and have less of a temperature increase along each block.

I have actually been designing a pretty tower in my head too. All acrylic sheet with an acrylic drip plate at the top and a small, secondary tower to get water to the top. Just two hose barbs at the bottom is all that would be required. Given, this will probably cost close to $100 to build, but it will be well worth it. I will try to get the ideas into 3d and post some pics someday.

EDIT:
Also, I wonder what would happen if you ran a coil of copper pipe up on the inside of the bong and then at the top hooked it to the shower head. I wonder if it would get a pre-cool effect or if it would just complicate the build or possibly even hurt temps. This is yet another thing that will have to be tried by someone.

I am seriously considering the acrylic bong, too. I have it all planned out in my head and I need to try and get some kind of schematic going. I know it would work great and I think it could be done for a very reasonable price, possibly $50 in materials, but it will take lots of cutting, gluing (solvent weld), and polishing (so the edges look nice and the whole thing is seamless).
Edited by NETio - 11/8/09 at 1:44pm
Black Box V2
(11 items)
 
  
CPUMotherboardGraphicsGraphics
i7 920 D0 @ 4.1GHz Foxconn Bloodrage NVIDIA GTX 580 NVIDIA GTX 580 
MonitorKeyboardPowerCase
ACER HN274H 27" 120Hz 3D Logitech PC Power & Cooling 950W MkII Lian Li PC-A77B 
MouseMouse PadAudio
Logitech G5 Generic  SONAR X-Fi 
  hide details  
Reply
Black Box V2
(11 items)
 
  
CPUMotherboardGraphicsGraphics
i7 920 D0 @ 4.1GHz Foxconn Bloodrage NVIDIA GTX 580 NVIDIA GTX 580 
MonitorKeyboardPowerCase
ACER HN274H 27" 120Hz 3D Logitech PC Power & Cooling 950W MkII Lian Li PC-A77B 
MouseMouse PadAudio
Logitech G5 Generic  SONAR X-Fi 
  hide details  
Reply
post #720 of 1335
Quote:
Originally Posted by nub View Post
OK Mike, so what are your temps while running OCCT and what is the ambient? You report 30C on your socket at idle? Are you sure that is not your nb temp? It sounds like a nb temp to me... BUT if that is your cpu socket temp then it does seem a little higher than I'd expect - from a core2. Have never used an i7 so.... will have to look at temps listed by others. You are also not listing your 1. ambient temp and 2. water temp. Do you have a thermostat yet to take these readings?

edit:
Quote: Anyhow, @ 4.01GHz on the CPU, 855MHz core/1105MHz mem on the GPU, and full load, I'm hitting 67C according to RealTemp. At idle I'm still seeing 36C on the highest core. According to the BIOS HW monitor, my socket temp is 30C at idle. ---

Mike, have you read this thread? http://www.overclock.net/water-cooli...blocks-i7.html If you locate your block on there, you will see test results claim a 32.8C difference on average between cpu core temp and the water temp. Hopefully you will have a thermometer to measure your water temps soon.

If those results are correct you would have 34 to 35C water temps - which is very high. I think your water to core temp delta is higher than found in the testing.

However you are clocked to 4ghz. He was at 3.7GHz, 1.28V - try dropping your clock down to that and compare results.
Temps while running OCCT are same as the Prime95 temps I posted earlier. The 30C I gave you is from the BIOS, and it was "CPU Socket Temperature". Dont have a t-stat yet, money is extremely tight, may not have it for a bit. I may just get a regular themometer like momma used to use to take my temp as a little kid and get a water temp from that. Oh, and reducing to 3.7GHz @ 1.28V got me the same temps.

Btw, I did get it down to 25C at full load (Prime95) today. I had to empty the icemaker and had nowhere to put it. Guess where it went? Yeah thats right, into my reservoir. Lasted for 30 minutes or so then the ice melted and temps started coming up.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Xeon X3220 G0 Gigabyte UD3P AMD HD6870 G.SKILL 4x2GB PC2-8500 
Hard DriveOptical DriveOSMonitor
Samsung Spinpoint F3 1TB (main), WD 500GB (backup) Sony Optiarc DVD-RW Windows 7 x64 AOC 22" widescreen 1080P 
KeyboardPowerCaseMouse
Filco Majestouch Corsair 750W Antec 900 Logitech G5 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Xeon X3220 G0 Gigabyte UD3P AMD HD6870 G.SKILL 4x2GB PC2-8500 
Hard DriveOptical DriveOSMonitor
Samsung Spinpoint F3 1TB (main), WD 500GB (backup) Sony Optiarc DVD-RW Windows 7 x64 AOC 22" widescreen 1080P 
KeyboardPowerCaseMouse
Filco Majestouch Corsair 750W Antec 900 Logitech G5 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › The Official Bong Lovers Club {56k FAIL}