Originally Posted by Solertia
Well, I'd like to at least reach 3.5Ghz, and obviously it's possible to reach 4Ghz with the 920s.
Currently my idle temps are between 30 and 36, and my 100% load temps are between 48 and 53. But my thermal compound is still undergoing it's burn-in time (200 hours, and I just mounted the block yesterday), so hopefully my temps will be lower once the burn-in time is done.
First: since you are using the same processor as me then will be no problems about my settings. The magic is simple leave all the setting auto in Bios.
Second: leave you memory frequency at auto as well which will give you 1600Mhz CL8, that is exactly what you need.
Third: Place 177 base clock and Vcore at 1.25, type it. The only changes that needs to be made are these 2 settings. no fancy tricks or alike. If the system does not boot then reset the Bios memory, up the CPU voltage to 1.30.
Now you are good to go, first try it, second tell me later the updates.