Overclock.net › Forums › Intel › Intel Motherboards › Gigabyte EP45-UD3 Series Owners Guide
New Posts  All Forums:Forum Nav:

Gigabyte EP45-UD3 Series Owners Guide - Page 1025

post #10241 of 21186
Quote:
Originally Posted by DaClownie View Post
I've used Driver Sweeper in safe mode, it still takes 10+ minutes to boot up, and when it gets to Windows it says that there is no ATI device present so CCC won't load and blah blah.

I need some help please guys
Hmmm, you could try using drivercleaner, but that isn't freeware anymore. + I kinda fear you might have to do a full windows re-install mate. -> http://www.drivercleaner.net/

Just swapping an nvidia card with another nvidia card usually means a re-install for me and windows might have messed something up IRQ-wise with the addition of that soundcard... Plug and Pray you know....

I'ld say try to get into safe mode, backup all your important stuff, docs etc and just format the thing and get it over with.


Quote:
Originally Posted by NoGuru View Post
koji, I really think you have a good handle on what to do. Keep testing every possible configuration. Remember that just because you think one settings is good doesn't mean you won't have to go back and change it later.
Hehe, thank you.
That's the pain in the ass isn't it. Ah well, it's good for the learning process on this board, figured out some stuff allready now just get the thing stable, just copy-pasting settings rarely works...
Edited by koji - 2/17/10 at 4:59am
Kaby
(12 items)
 
  
CPUMotherboardGraphicsRAM
i7 - 7700k MSI z270 Gaming M7 Asus GTX1070 FE Corsair Vengeance LED 2x 8gb dd43200 
Hard DriveCoolingMonitorKeyboard
Samsung EVO 960 m2 Noctua NH-D15 Eizo FS2434 Corsair Strafe RGB 
PowerCaseMouseAudio
Corsair RMI 850 Corsair 570x Logitech G502 Soundblaster Zx / PC360 
  hide details  
Reply
Kaby
(12 items)
 
  
CPUMotherboardGraphicsRAM
i7 - 7700k MSI z270 Gaming M7 Asus GTX1070 FE Corsair Vengeance LED 2x 8gb dd43200 
Hard DriveCoolingMonitorKeyboard
Samsung EVO 960 m2 Noctua NH-D15 Eizo FS2434 Corsair Strafe RGB 
PowerCaseMouseAudio
Corsair RMI 850 Corsair 570x Logitech G502 Soundblaster Zx / PC360 
  hide details  
Reply
post #10242 of 21186
Quote:
Originally Posted by koji View Post
Hmmm, you could try using drivercleaner, but that isn't freeware anymore. + I kinda fear you might have to do a full windows re-install mate. -> http://www.drivercleaner.net/

Just swapping an nvidia card with another nvidia card usually means a re-install for me and windows might have messed something up IRQ-wise with the addition of that soundcard... Plug and Pray you know....

I'ld say try to get into safe mode, backup all your important stuff, docs etc and just format the thing and get it over with.

I took the sound card out to eliminate that as an issue, I currently have the 80GB HDD hooked up, but its being read as a SCSI drive in windows and as far as I know the UD3P doesn't even support SCSI. With that being said, I'm almost positive SCSI uses different connections than a standard ribbon cable... not that I'd really know. Never owned a SCSI drive to my knowledge.

I'd like to see if we can diagnose and fix the problem rather than reformatting and reinstalling. Come on, we got the most knowledgeable mofos around in this thread. Any thoughts guys?
Beast of Burden
(19 items)
 
Cool story, bro!
(16 items)
 
 
CPUMotherboardGraphicsRAM
i7 3770k Gigabyte Z77X-UD5H Gigabyte HD 7970 Reference Ripjaws Z 
Hard DriveHard DriveOptical DriveCooling
Crucial M4 Caviar Black ASUS DVD XSPC Raystorm 
CoolingCoolingCoolingOS
EK FC-7970 w/ Backplate Copper/Acetal RX360 w/ 3x Yate Loon High Speed in Push XSPC Dual Bay Res w/ D5 Pump Windows 7 
MonitorMonitorKeyboardPower
ASUS VE226H ASUS VE226H Cooler Master Quickfire Rapid Corsair HX850 
CaseMouseMouse Pad
HAF 932 Advanced Razer Deathadder QcK Mini 
CPUMotherboardGraphicsRAM
Q9550@ 3.5GHz w/ 1.191v Gigabyte GA-EP45-UD3P Sapphire Reference 5850 @ 775/1100 G.SKILL 4GB (2 x 2GB) DDR2 1066 
Hard DriveHard DriveHard DriveOptical Drive
Crucial C300 Spinpoint F3 Caviar Black ASUS DVD-RW 
CoolingOSMonitorKeyboard
Arctic Cooling Freezer 7 Pro Windows 7 Home Premium 64-bit Samsung 23" Saitek Eclipse III 
PowerCaseMouse
Corsair 430W NZXT Source 210 Wolf King 
  hide details  
Reply
Beast of Burden
(19 items)
 
Cool story, bro!
(16 items)
 
 
CPUMotherboardGraphicsRAM
i7 3770k Gigabyte Z77X-UD5H Gigabyte HD 7970 Reference Ripjaws Z 
Hard DriveHard DriveOptical DriveCooling
Crucial M4 Caviar Black ASUS DVD XSPC Raystorm 
CoolingCoolingCoolingOS
EK FC-7970 w/ Backplate Copper/Acetal RX360 w/ 3x Yate Loon High Speed in Push XSPC Dual Bay Res w/ D5 Pump Windows 7 
MonitorMonitorKeyboardPower
ASUS VE226H ASUS VE226H Cooler Master Quickfire Rapid Corsair HX850 
CaseMouseMouse Pad
HAF 932 Advanced Razer Deathadder QcK Mini 
CPUMotherboardGraphicsRAM
Q9550@ 3.5GHz w/ 1.191v Gigabyte GA-EP45-UD3P Sapphire Reference 5850 @ 775/1100 G.SKILL 4GB (2 x 2GB) DDR2 1066 
Hard DriveHard DriveHard DriveOptical Drive
Crucial C300 Spinpoint F3 Caviar Black ASUS DVD-RW 
CoolingOSMonitorKeyboard
Arctic Cooling Freezer 7 Pro Windows 7 Home Premium 64-bit Samsung 23" Saitek Eclipse III 
PowerCaseMouse
Corsair 430W NZXT Source 210 Wolf King 
  hide details  
Reply
post #10243 of 21186
Quote:
Originally Posted by bk7794 View Post
have fun man. Im on vaca. Just pulled an all nighter. WOO!! not 24 hours though
Working on it... Raising the PLL to 1.59 didn't do anything (tested it this morning). Failed in about 8 seconds... (Lowered the vcore about two notches).
What's the highest one should go? I've heard NoGuru (I think) say that people have run it at 1.75v with no issues, so I'm assuming anywhere in the 1.6xv range is safe?
'Cus right now, it's at 1.63v
I'll try to stress test it here... See what happens.
Sandy Goodness
(17 items)
 
Sandy Mininess
(14 items)
 
Simply the best
(13 items)
 
CPUMotherboardGraphicsRAM
Intel i5 2500k @ 3.7GHz Gigabyte GA-Z68XP-UD4 EVGA GeForce GTX 760 2GB G.SKILL Ripjaws 16GB 4x4GB 2133MHz 
Hard DriveHard DriveHard DriveCooling
60GB OCZ Vertex 3 60GB OCZ Vertex 3 2x 1TB Western Digital Caviar Black (RAID 0) XSPC Rasa RX360 (CPU) 
OSOSMonitorKeyboard
Windows 8 x64 Professional ArchLinux x64 Dell UltraSharp U2312HM Das S Professional 
PowerCaseMouseAudio
Seasonic X650 Coolermaster HAF X Razer Naga Asus Xonar Essence STX 
CPUMotherboardGraphicsRAM
Something slow and mobile No idea The best Leaking 
Hard DriveOptical DriveOSMonitor
Not nearly enough for my CP It's removable! Linux - ta best!!!1!!! Bigger than yours 
KeyboardPowerCaseMouse
Mine has twenty eight keys A battery derrr Fat and blocky They scare elephants 
Mouse Pad
Useless 
  hide details  
Reply
Sandy Goodness
(17 items)
 
Sandy Mininess
(14 items)
 
Simply the best
(13 items)
 
CPUMotherboardGraphicsRAM
Intel i5 2500k @ 3.7GHz Gigabyte GA-Z68XP-UD4 EVGA GeForce GTX 760 2GB G.SKILL Ripjaws 16GB 4x4GB 2133MHz 
Hard DriveHard DriveHard DriveCooling
60GB OCZ Vertex 3 60GB OCZ Vertex 3 2x 1TB Western Digital Caviar Black (RAID 0) XSPC Rasa RX360 (CPU) 
OSOSMonitorKeyboard
Windows 8 x64 Professional ArchLinux x64 Dell UltraSharp U2312HM Das S Professional 
PowerCaseMouseAudio
Seasonic X650 Coolermaster HAF X Razer Naga Asus Xonar Essence STX 
CPUMotherboardGraphicsRAM
Something slow and mobile No idea The best Leaking 
Hard DriveOptical DriveOSMonitor
Not nearly enough for my CP It's removable! Linux - ta best!!!1!!! Bigger than yours 
KeyboardPowerCaseMouse
Mine has twenty eight keys A battery derrr Fat and blocky They scare elephants 
Mouse Pad
Useless 
  hide details  
Reply
post #10244 of 21186
Quote:
Originally Posted by Dilyn View Post
Working on it... Raising the PLL to 1.59 didn't do anything (tested it this morning). Failed in about 8 seconds... (Lowered the vcore about two notches).
What's the highest one should go? I've heard NoGuru (I think) say that people have run it at 1.75v with no issues, so I'm assuming anywhere in the 1.6xv range is safe?
'Cus right now, it's at 1.63v
I'll try to stress test it here... See what happens.
yeah, I seen people running it at 1.65v. You should be good.
A very big SHO
(17 items)
 
  
CPUMotherboardGraphicsRAM
Q9550 4.0ghz 1.3v Winter, 3.4ghz @ 1.20v GA-EP45-UD3R F9 BFG 9800gtx+OC 512mb 775/2000/1177 G-skill 1066 blue heatspreaders 4Gb 8 soon 
Hard DriveHard DriveHard DriveOptical Drive
Western Digital 640 Samsung 830 SSD 2 Western Digital WD10EZEX Raid 0 Sony Optiarc 
CoolingOSMonitorKeyboard
Noctua Nh-u12p Windows Xp home 32bit and windows 7 64bit dell 17, Dell P2414H Microsoft Comfort Curve Keyboard 
PowerCaseMouseMouse Pad
650watt earthwatt Antec 300 Logitech G500 Martin Guitar and CO. 
Audio
Onkyo Receiver  
  hide details  
Reply
A very big SHO
(17 items)
 
  
CPUMotherboardGraphicsRAM
Q9550 4.0ghz 1.3v Winter, 3.4ghz @ 1.20v GA-EP45-UD3R F9 BFG 9800gtx+OC 512mb 775/2000/1177 G-skill 1066 blue heatspreaders 4Gb 8 soon 
Hard DriveHard DriveHard DriveOptical Drive
Western Digital 640 Samsung 830 SSD 2 Western Digital WD10EZEX Raid 0 Sony Optiarc 
CoolingOSMonitorKeyboard
Noctua Nh-u12p Windows Xp home 32bit and windows 7 64bit dell 17, Dell P2414H Microsoft Comfort Curve Keyboard 
PowerCaseMouseMouse Pad
650watt earthwatt Antec 300 Logitech G500 Martin Guitar and CO. 
Audio
Onkyo Receiver  
  hide details  
Reply
post #10245 of 21186
Thread Starter 
Quote:
Originally Posted by Dilyn View Post
Working on it... Raising the PLL to 1.59 didn't do anything (tested it this morning). Failed in about 8 seconds... (Lowered the vcore about two notches).
What's the highest one should go? I've heard NoGuru (I think) say that people have run it at 1.75v with no issues, so I'm assuming anywhere in the 1.6xv range is safe?
'Cus right now, it's at 1.63v
I'll try to stress test it here... See what happens.
I have seen it that high, but, I would not run that high for 24/7. If you do, make sure it is very stable, and stay away from tests that create to much heat. Prime is what I would use, might take longer, but you will be able to keep heat down.
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
post #10246 of 21186
...PLL is at 1.67v right now, but I still can't get the vcore below 1.44375v. Wat.
Sandy Goodness
(17 items)
 
Sandy Mininess
(14 items)
 
Simply the best
(13 items)
 
CPUMotherboardGraphicsRAM
Intel i5 2500k @ 3.7GHz Gigabyte GA-Z68XP-UD4 EVGA GeForce GTX 760 2GB G.SKILL Ripjaws 16GB 4x4GB 2133MHz 
Hard DriveHard DriveHard DriveCooling
60GB OCZ Vertex 3 60GB OCZ Vertex 3 2x 1TB Western Digital Caviar Black (RAID 0) XSPC Rasa RX360 (CPU) 
OSOSMonitorKeyboard
Windows 8 x64 Professional ArchLinux x64 Dell UltraSharp U2312HM Das S Professional 
PowerCaseMouseAudio
Seasonic X650 Coolermaster HAF X Razer Naga Asus Xonar Essence STX 
CPUMotherboardGraphicsRAM
Something slow and mobile No idea The best Leaking 
Hard DriveOptical DriveOSMonitor
Not nearly enough for my CP It's removable! Linux - ta best!!!1!!! Bigger than yours 
KeyboardPowerCaseMouse
Mine has twenty eight keys A battery derrr Fat and blocky They scare elephants 
Mouse Pad
Useless 
  hide details  
Reply
Sandy Goodness
(17 items)
 
Sandy Mininess
(14 items)
 
Simply the best
(13 items)
 
CPUMotherboardGraphicsRAM
Intel i5 2500k @ 3.7GHz Gigabyte GA-Z68XP-UD4 EVGA GeForce GTX 760 2GB G.SKILL Ripjaws 16GB 4x4GB 2133MHz 
Hard DriveHard DriveHard DriveCooling
60GB OCZ Vertex 3 60GB OCZ Vertex 3 2x 1TB Western Digital Caviar Black (RAID 0) XSPC Rasa RX360 (CPU) 
OSOSMonitorKeyboard
Windows 8 x64 Professional ArchLinux x64 Dell UltraSharp U2312HM Das S Professional 
PowerCaseMouseAudio
Seasonic X650 Coolermaster HAF X Razer Naga Asus Xonar Essence STX 
CPUMotherboardGraphicsRAM
Something slow and mobile No idea The best Leaking 
Hard DriveOptical DriveOSMonitor
Not nearly enough for my CP It's removable! Linux - ta best!!!1!!! Bigger than yours 
KeyboardPowerCaseMouse
Mine has twenty eight keys A battery derrr Fat and blocky They scare elephants 
Mouse Pad
Useless 
  hide details  
Reply
post #10247 of 21186
Thread Starter 
Quote:
Originally Posted by Dilyn View Post
...PLL is at 1.67v right now, but I still can't get the vcore below 1.44375v. Wat.
Opps, I thought you meant vcore. 1.67 is still a bit high but not too bad.
Edited by NoGuru - 2/17/10 at 7:06pm
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
post #10248 of 21186
Quote:
Originally Posted by Dilyn View Post
...PLL is at 1.67v right now, but I still can't get the vcore below 1.44375v. Wat.
Im sorry man that it didn't work out. Maybe it was only for Quads...Cause it really helped me.
A very big SHO
(17 items)
 
  
CPUMotherboardGraphicsRAM
Q9550 4.0ghz 1.3v Winter, 3.4ghz @ 1.20v GA-EP45-UD3R F9 BFG 9800gtx+OC 512mb 775/2000/1177 G-skill 1066 blue heatspreaders 4Gb 8 soon 
Hard DriveHard DriveHard DriveOptical Drive
Western Digital 640 Samsung 830 SSD 2 Western Digital WD10EZEX Raid 0 Sony Optiarc 
CoolingOSMonitorKeyboard
Noctua Nh-u12p Windows Xp home 32bit and windows 7 64bit dell 17, Dell P2414H Microsoft Comfort Curve Keyboard 
PowerCaseMouseMouse Pad
650watt earthwatt Antec 300 Logitech G500 Martin Guitar and CO. 
Audio
Onkyo Receiver  
  hide details  
Reply
A very big SHO
(17 items)
 
  
CPUMotherboardGraphicsRAM
Q9550 4.0ghz 1.3v Winter, 3.4ghz @ 1.20v GA-EP45-UD3R F9 BFG 9800gtx+OC 512mb 775/2000/1177 G-skill 1066 blue heatspreaders 4Gb 8 soon 
Hard DriveHard DriveHard DriveOptical Drive
Western Digital 640 Samsung 830 SSD 2 Western Digital WD10EZEX Raid 0 Sony Optiarc 
CoolingOSMonitorKeyboard
Noctua Nh-u12p Windows Xp home 32bit and windows 7 64bit dell 17, Dell P2414H Microsoft Comfort Curve Keyboard 
PowerCaseMouseMouse Pad
650watt earthwatt Antec 300 Logitech G500 Martin Guitar and CO. 
Audio
Onkyo Receiver  
  hide details  
Reply
post #10249 of 21186
I have a stupid question about my Gigabyte P45 UD3P, too remove my graphics card which way do I push the little locking tab thingy? The instructions are not very clear and I really don't want to break the little tab.
    
CPUMotherboardGraphicsRAM
Intel Core 2 Quad Q9550 Gigabyte EP45-UD3P Sapphire 4830 512mb 6gb G.Skill DDR2 800 
Hard DriveOptical DriveOSMonitor
Intel X25M 80gb Gen. 2 + 640gb Caviar Black LG USB External Windows 7 Home Premium Acer 24" 1920 x 1080p 
KeyboardPowerCaseMouse
Microsoft Sidewinder X6 Corsair HX750 Cooler Master HAF 922 Razer Deathadder 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Core 2 Quad Q9550 Gigabyte EP45-UD3P Sapphire 4830 512mb 6gb G.Skill DDR2 800 
Hard DriveOptical DriveOSMonitor
Intel X25M 80gb Gen. 2 + 640gb Caviar Black LG USB External Windows 7 Home Premium Acer 24" 1920 x 1080p 
KeyboardPowerCaseMouse
Microsoft Sidewinder X6 Corsair HX750 Cooler Master HAF 922 Razer Deathadder 
  hide details  
Reply
post #10250 of 21186
So I tried for over 500 FSB tonight but no luck...

I went for:
518 - 4.40
515
510

All no luck getting to Windows. I posted and got to where it should load windows and it just restarts..
settings were:
CPU Voltage - 1.425
CPU Term - 1.38
CPU PLL - 1.65

MCH - 1.30

DRAM - 2.18
.....

My settings for 500 x 8.5 are:
CPU V - 1.40 (Windows 1.360v)
CPU Term - 1.36
CPU PLL - 1.65

MCH - 1.26

DRAM - 2.10

Thats bench stable, but IBT gets it up to 70c+ and I end up BSOD or Crashing.

.....
100% Stable at:

475 x 8.5

CPU V - 1.318v (Windows 1.280v)
CPU Term - 1.30
CPU PLL - 1.55

MCH - 1.26

DRAM - 2.10


Thinking its my Reapers. They are DDR2 1000, but in all reality they are just overclocked 800's, even cpu-z reads it as PC6400 not PC8000.....

Looks like I will need to grab a set of 1066's just to try and see..
The Money Pit
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7-950 - 4.24 @ 1.40v Batch #3941B089 EVGA X58 SLI LE MSI 580 GTX Lightning - 950/1900/2200 @ 1.1v 6GB Mushkin @ 1475 - 6-8-6-24 
Hard DriveHard DriveOptical DriveCooling
120GB Vertex Plus 2 x 500GB WD Blues RAID0 Lite-On DVD/CD Custom H20 Loop 
OSMonitorPowerCase
Win 7 Ulti-64 25" I-Inc iH253 Antec TruePower New TP-750 CoolerMaster HAF 932 
  hide details  
Reply
The Money Pit
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7-950 - 4.24 @ 1.40v Batch #3941B089 EVGA X58 SLI LE MSI 580 GTX Lightning - 950/1900/2200 @ 1.1v 6GB Mushkin @ 1475 - 6-8-6-24 
Hard DriveHard DriveOptical DriveCooling
120GB Vertex Plus 2 x 500GB WD Blues RAID0 Lite-On DVD/CD Custom H20 Loop 
OSMonitorPowerCase
Win 7 Ulti-64 25" I-Inc iH253 Antec TruePower New TP-750 CoolerMaster HAF 932 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › Gigabyte EP45-UD3 Series Owners Guide