Overclock.net › Forums › Intel › Intel Motherboards › Gigabyte EP45-UD3 Series Owners Guide
New Posts  All Forums:Forum Nav:

Gigabyte EP45-UD3 Series Owners Guide - Page 1267

post #12661 of 21186
Thread Starter 
Quote:
Originally Posted by XtremeCuztoms View Post
cool. thanks for sharing. and i really like the input from the guys in this thread and look up to everyone here for good sound advise. so i will make the VX off the list.
almost 80% sure i will go with the Prolimatech Megahalem with a push/pull with Yate Loon D12SH-12's
Are those the medium speeds? Side note, order them through Petra's, so they are true Yates, other wise they will be part Yate and part whatever.

Quote:
Originally Posted by GOTFrog View Post
I had to raise my vcore from 1.34 to 1.36 cause it didn't like running SMP and GTA4 both at once. ARGH!
Life is hard that way Frog. I had to raise vcore to run SMP, BF2BC, and talk on the phone. Might not have had too, but the call was to a Singapore prostitute.
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
post #12662 of 21186
@ Xtreme did you pressure / washer mod your true?
post #12663 of 21186
Quote:
Originally Posted by freakb18c1 View Post
@ Xtreme did you pressure / washer mod your true?
no i didnt pressure mod my True. but with the OC i have on my E6750 i see idle temps around 18c and full load temps around 35c.
plus right now with the window a/c unit running in here it's about 51F... so im freezing my a@$ off.

when i give my rig to my nephew it will be in the basement, during the summer down there it's around 60F and in the winter its around 65F so he should be ok.

so question, the pressure mod, all your doing is adding a shim or a penny under the mounting bracket to make it sit tighter to the cpu right?
    
CPUMotherboardGraphicsRAM
2600k, 2700k, 34 lga 775 chippers z68x-ud4, MIVE, Commando's, and crap FX5500, 6970, 6670, 4890, and junk Team D9's/ Ballistix D9's, Muskin Hypers !! 
Hard DriveOptical DriveOSMonitor
C300 / WD 500 / 640 Caviar Blue Asus Lightscribe / LG Win7/Vista/XP/Server 08 EE Acer P235H 1920 X 1080 HD 
KeyboardPowerCaseMouse
Logitech Ill. Mushkin 1200 Joule CM690 II Adv/Tech Bench DiamondBack 3G 
Mouse Pad
eXactMat 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
2600k, 2700k, 34 lga 775 chippers z68x-ud4, MIVE, Commando's, and crap FX5500, 6970, 6670, 4890, and junk Team D9's/ Ballistix D9's, Muskin Hypers !! 
Hard DriveOptical DriveOSMonitor
C300 / WD 500 / 640 Caviar Blue Asus Lightscribe / LG Win7/Vista/XP/Server 08 EE Acer P235H 1920 X 1080 HD 
KeyboardPowerCaseMouse
Logitech Ill. Mushkin 1200 Joule CM690 II Adv/Tech Bench DiamondBack 3G 
Mouse Pad
eXactMat 
  hide details  
Reply
post #12664 of 21186
lol i spent 3 or 4 more hrs lapping my cpu and crappy my temps might be higher lol gonna have to spend more time on it and the heatsink for like of me i cant get the mega to have any kinda mirror finish.
SABERWOLF
(18 items)
 
XEON-WOLF
(18 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7-6800K MSI X99A GAMING PRO CARBON EVGA GTX 1080 FTW Hydro Copper G.SKILL TridentZ Series 
Hard DriveCoolingCoolingCooling
Samsung EVO 850 500 EK-SBAY Dual DDC 3.2 PWM Serial Alphacool NexXxoS ST30 Full Copper Radiator 360 Hardware Labs Black Ice SR2 Multiport Black Car... 
CoolingCoolingOSMonitor
EK-CoolStream RAD XTC 420 koolance 380i Windows 10 Pro ASUS VW246H Black 24" 2ms 
PowerCaseMouseAudio
SeaSonic M12D SS-850 850W  Thermaltake core x71 CM Storm Sentinel Advance II Corsair Void 
CPUMotherboardGraphicsRAM
X5675@4400 1.344 ASUS P6X58D-E XfX RX480 RS F3-12800CL7T-6GBPI 6-7-6-21 1T 
RAMHard DriveHard DriveHard Drive
F3-12800CL9S-4GBRL WDC WD1001FALS-00J7B1 ST31000340AS WDC WD7500AAKS-00RBA0 
Hard DriveOptical DriveCoolingOS
Hitachi HDS723020BLA642 ihas 624-A SilverStone Heligon HE01 windows 10 64 Pro 
MonitorPowerCase
Vizio 42inch lcd tv CORSAIR CMPSU-950TX Modded Rocketfish 
  hide details  
Reply
SABERWOLF
(18 items)
 
XEON-WOLF
(18 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7-6800K MSI X99A GAMING PRO CARBON EVGA GTX 1080 FTW Hydro Copper G.SKILL TridentZ Series 
Hard DriveCoolingCoolingCooling
Samsung EVO 850 500 EK-SBAY Dual DDC 3.2 PWM Serial Alphacool NexXxoS ST30 Full Copper Radiator 360 Hardware Labs Black Ice SR2 Multiport Black Car... 
CoolingCoolingOSMonitor
EK-CoolStream RAD XTC 420 koolance 380i Windows 10 Pro ASUS VW246H Black 24" 2ms 
PowerCaseMouseAudio
SeaSonic M12D SS-850 850W  Thermaltake core x71 CM Storm Sentinel Advance II Corsair Void 
CPUMotherboardGraphicsRAM
X5675@4400 1.344 ASUS P6X58D-E XfX RX480 RS F3-12800CL7T-6GBPI 6-7-6-21 1T 
RAMHard DriveHard DriveHard Drive
F3-12800CL9S-4GBRL WDC WD1001FALS-00J7B1 ST31000340AS WDC WD7500AAKS-00RBA0 
Hard DriveOptical DriveCoolingOS
Hitachi HDS723020BLA642 ihas 624-A SilverStone Heligon HE01 windows 10 64 Pro 
MonitorPowerCase
Vizio 42inch lcd tv CORSAIR CMPSU-950TX Modded Rocketfish 
  hide details  
Reply
post #12665 of 21186
Thread Starter 
Quote:
Originally Posted by XtremeCuztoms View Post
no i didnt pressure mod my True. but with the OC i have on my E6750 i see idle temps around 18c and full load temps around 35c.
plus right now with the window a/c unit running in here it's about 51F... so im freezing my a@$ off.

when i give my rig to my nephew it will be in the basement, during the summer down there it's around 60F and in the winter its around 65F so he should be ok.

so question, the pressure mod, all your doing is adding a shim or a penny under the mounting bracket to make it sit tighter to the cpu right?
Yes, adding that little bit a space should improve temps, but don't make it to big.

Edit: Bal what grit are you using, and what method?
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
post #12666 of 21186
Quote:
Originally Posted by NoGuru View Post
Are those the medium speeds? Side note, order them through Petra's, so they are true Yates, other wise they will be part Yate and part whatever.


Life is hard that way Frog. I had to raise vcore to run SMP, BF2BC, and talk on the phone. Might not have had too, but the call was to a Singapore prostitute.
ya, well i have not ordered the High speed Yate Loon's for the cpu cooler yet.

i did order this stuff from performance-pcs

1 x 3-Pin Y-Adapter Cable 6" Sleeved (3PYSPLIT-6) = $3.95
Sleeve Color Black
Heatshrink Color Black

6 x 3-Pin Fan Extension Cable 18" Black - Sleeved (FC33-18BKS) = $11.94

1 x *** HOT *** Lamptron FC-6- 20 Watts Per Channel 4 Channel Mulit-Color Fan Controller - Black (FC-6-BK) = $49.95

4 x Yate Loon 140mm Medium Speed Silent Case Fan - D14SM-12 - Sleeved (D14SM-12) =$35.80

1 x Yate Loon 120mm High Speed Performance UV Blue Case Fan with Blue LED - D12SH-124UB - Sleeved (D12SH-124UB) = $8.95
    
CPUMotherboardGraphicsRAM
2600k, 2700k, 34 lga 775 chippers z68x-ud4, MIVE, Commando's, and crap FX5500, 6970, 6670, 4890, and junk Team D9's/ Ballistix D9's, Muskin Hypers !! 
Hard DriveOptical DriveOSMonitor
C300 / WD 500 / 640 Caviar Blue Asus Lightscribe / LG Win7/Vista/XP/Server 08 EE Acer P235H 1920 X 1080 HD 
KeyboardPowerCaseMouse
Logitech Ill. Mushkin 1200 Joule CM690 II Adv/Tech Bench DiamondBack 3G 
Mouse Pad
eXactMat 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
2600k, 2700k, 34 lga 775 chippers z68x-ud4, MIVE, Commando's, and crap FX5500, 6970, 6670, 4890, and junk Team D9's/ Ballistix D9's, Muskin Hypers !! 
Hard DriveOptical DriveOSMonitor
C300 / WD 500 / 640 Caviar Blue Asus Lightscribe / LG Win7/Vista/XP/Server 08 EE Acer P235H 1920 X 1080 HD 
KeyboardPowerCaseMouse
Logitech Ill. Mushkin 1200 Joule CM690 II Adv/Tech Bench DiamondBack 3G 
Mouse Pad
eXactMat 
  hide details  
Reply
post #12667 of 21186
Quote:
Originally Posted by NoGuru View Post
Yes, adding that little bit a space should improve temps, but don't make it to big.

Edit: Bal what grit are you using, and what method?
i have 220 400 600 800 1000 and 1500 dry i tried the circle motion and straight with water keeping the paper wet. Lol im not new to lapping i lapped my e6600, q6600, 2 pd945s and a old p4 and 2 tuniq towers and a zalman 9500 never had this much trouble getting a mirror finish or even close to it.
Edited by Bal3Wolf - 5/14/10 at 9:44pm
SABERWOLF
(18 items)
 
XEON-WOLF
(18 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7-6800K MSI X99A GAMING PRO CARBON EVGA GTX 1080 FTW Hydro Copper G.SKILL TridentZ Series 
Hard DriveCoolingCoolingCooling
Samsung EVO 850 500 EK-SBAY Dual DDC 3.2 PWM Serial Alphacool NexXxoS ST30 Full Copper Radiator 360 Hardware Labs Black Ice SR2 Multiport Black Car... 
CoolingCoolingOSMonitor
EK-CoolStream RAD XTC 420 koolance 380i Windows 10 Pro ASUS VW246H Black 24" 2ms 
PowerCaseMouseAudio
SeaSonic M12D SS-850 850W  Thermaltake core x71 CM Storm Sentinel Advance II Corsair Void 
CPUMotherboardGraphicsRAM
X5675@4400 1.344 ASUS P6X58D-E XfX RX480 RS F3-12800CL7T-6GBPI 6-7-6-21 1T 
RAMHard DriveHard DriveHard Drive
F3-12800CL9S-4GBRL WDC WD1001FALS-00J7B1 ST31000340AS WDC WD7500AAKS-00RBA0 
Hard DriveOptical DriveCoolingOS
Hitachi HDS723020BLA642 ihas 624-A SilverStone Heligon HE01 windows 10 64 Pro 
MonitorPowerCase
Vizio 42inch lcd tv CORSAIR CMPSU-950TX Modded Rocketfish 
  hide details  
Reply
SABERWOLF
(18 items)
 
XEON-WOLF
(18 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7-6800K MSI X99A GAMING PRO CARBON EVGA GTX 1080 FTW Hydro Copper G.SKILL TridentZ Series 
Hard DriveCoolingCoolingCooling
Samsung EVO 850 500 EK-SBAY Dual DDC 3.2 PWM Serial Alphacool NexXxoS ST30 Full Copper Radiator 360 Hardware Labs Black Ice SR2 Multiport Black Car... 
CoolingCoolingOSMonitor
EK-CoolStream RAD XTC 420 koolance 380i Windows 10 Pro ASUS VW246H Black 24" 2ms 
PowerCaseMouseAudio
SeaSonic M12D SS-850 850W  Thermaltake core x71 CM Storm Sentinel Advance II Corsair Void 
CPUMotherboardGraphicsRAM
X5675@4400 1.344 ASUS P6X58D-E XfX RX480 RS F3-12800CL7T-6GBPI 6-7-6-21 1T 
RAMHard DriveHard DriveHard Drive
F3-12800CL9S-4GBRL WDC WD1001FALS-00J7B1 ST31000340AS WDC WD7500AAKS-00RBA0 
Hard DriveOptical DriveCoolingOS
Hitachi HDS723020BLA642 ihas 624-A SilverStone Heligon HE01 windows 10 64 Pro 
MonitorPowerCase
Vizio 42inch lcd tv CORSAIR CMPSU-950TX Modded Rocketfish 
  hide details  
Reply
post #12668 of 21186
Quote:
Originally Posted by XtremeCuztoms View Post
no i didnt pressure mod my True. but with the OC i have on my E6750 i see idle temps around 18c and full load temps around 35c.
plus right now with the window a/c unit running in here it's about 51F... so im freezing my a@$ off.

when i give my rig to my nephew it will be in the basement, during the summer down there it's around 60F and in the winter its around 65F so he should be ok.

so question, the pressure mod, all your doing is adding a shim or a penny under the mounting bracket to make it sit tighter to the cpu right?

yea depends if your cpu if its not lapped use a penny, if its lapped use something thicker like a nickel
easily dropped 6c off load maybe more i could not do crazy oc's with out it
post #12669 of 21186
Thread Starter 
Quote:
Originally Posted by XtremeCuztoms View Post
ya, well i have not ordered the High speed Yate Loon's for the cpu cooler yet.

i did order this stuff from performance-pcs

1 x 3-Pin Y-Adapter Cable 6" Sleeved (3PYSPLIT-6) = $3.95
Sleeve Color Black
Heatshrink Color Black

6 x 3-Pin Fan Extension Cable 18" Black - Sleeved (FC33-18BKS) = $11.94

1 x *** HOT *** Lamptron FC-6- 20 Watts Per Channel 4 Channel Mulit-Color Fan Controller - Black (FC-6-BK) = $49.95

4 x Yate Loon 140mm Medium Speed Silent Case Fan - D14SM-12 - Sleeved (D14SM-12) =$35.80

1 x Yate Loon 120mm High Speed Performance UV Blue Case Fan with Blue LED - D12SH-124UB - Sleeved (D12SH-124UB) = $8.95
Dam, daddy war bucks, nice order.
Not that big of a deal, just read that most of the company's use other parts mixed with the Yates.
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
post #12670 of 21186
Thread Starter 
Quote:
Originally Posted by Bal3Wolf View Post
i have 220 400 600 800 1000 and 1500 dry i tried the circle motion and straight with water keeping the paper wet. Lol im not new to lapping i lapped my e6600, q6600, 2 pd945s and a old p4 and 2 tuniq towers and a zalman 9500 never had this much trouble getting a mirror finish or even close to it.
Well the mirror finish is not as important as flat, but I need 2000 grit to get the mirror.
Are you applying presser? How many stokes per side?
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › Gigabyte EP45-UD3 Series Owners Guide