Overclock.net › Forums › Intel › Intel Motherboards › Gigabyte EP45-UD3 Series Owners Guide
New Posts  All Forums:Forum Nav:

Gigabyte EP45-UD3 Series Owners Guide - Page 1386

post #13851 of 21187
I do believe that it was stock at 2.0

After that run I did one at 5-5-5-15, not sure if it was at 1256 though. Might've been there, or at 1216 or stock 1200. But I know for a fact I got it at 1200 PL 8 tRFC 52 5-5-5-15 on Turbo mode. Extreme would've worked but required more MCH voltage than that I wanted without a fan on it. But I could not stress test these, as my CPU OC was completely unstable under any stress test.
However, I could go about my daily routine with relative ease. I attribute the BSODs I received to a terrible CPU
What's the max voltage on low voltage RAM like this? As I do believe that that little suicide run/mission took 2.12v to make it.
Edited by Dilyn - 6/17/10 at 8:31pm
Sandy Goodness
(17 items)
 
Sandy Mininess
(14 items)
 
Simply the best
(13 items)
 
CPUMotherboardGraphicsRAM
Intel i5 2500k @ 3.7GHz Gigabyte GA-Z68XP-UD4 EVGA GeForce GTX 760 2GB G.SKILL Ripjaws 16GB 4x4GB 2133MHz 
Hard DriveHard DriveHard DriveCooling
60GB OCZ Vertex 3 60GB OCZ Vertex 3 2x 1TB Western Digital Caviar Black (RAID 0) XSPC Rasa RX360 (CPU) 
OSOSMonitorKeyboard
Windows 8 x64 Professional ArchLinux x64 Dell UltraSharp U2312HM Das S Professional 
PowerCaseMouseAudio
Seasonic X650 Coolermaster HAF X Razer Naga Asus Xonar Essence STX 
CPUMotherboardGraphicsRAM
Something slow and mobile No idea The best Leaking 
Hard DriveOptical DriveOSMonitor
Not nearly enough for my CP It's removable! Linux - ta best!!!1!!! Bigger than yours 
KeyboardPowerCaseMouse
Mine has twenty eight keys A battery derrr Fat and blocky They scare elephants 
Mouse Pad
Useless 
  hide details  
Reply
Sandy Goodness
(17 items)
 
Sandy Mininess
(14 items)
 
Simply the best
(13 items)
 
CPUMotherboardGraphicsRAM
Intel i5 2500k @ 3.7GHz Gigabyte GA-Z68XP-UD4 EVGA GeForce GTX 760 2GB G.SKILL Ripjaws 16GB 4x4GB 2133MHz 
Hard DriveHard DriveHard DriveCooling
60GB OCZ Vertex 3 60GB OCZ Vertex 3 2x 1TB Western Digital Caviar Black (RAID 0) XSPC Rasa RX360 (CPU) 
OSOSMonitorKeyboard
Windows 8 x64 Professional ArchLinux x64 Dell UltraSharp U2312HM Das S Professional 
PowerCaseMouseAudio
Seasonic X650 Coolermaster HAF X Razer Naga Asus Xonar Essence STX 
CPUMotherboardGraphicsRAM
Something slow and mobile No idea The best Leaking 
Hard DriveOptical DriveOSMonitor
Not nearly enough for my CP It's removable! Linux - ta best!!!1!!! Bigger than yours 
KeyboardPowerCaseMouse
Mine has twenty eight keys A battery derrr Fat and blocky They scare elephants 
Mouse Pad
Useless 
  hide details  
Reply
post #13852 of 21187
Quote:
Originally Posted by ben h View Post
Code:
CPU = Q8400
Motherboard = EP45-UD3P 
BIOS Version = FD




MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster .............: turbo
CPU Clock Ratio .....................: 7X
Fine CPU Clock Ratio.................: -
CPU Frequency .......................: 3.33 ghz


Clock Chip Control 
Standard Clock Control
CPU Host Clock Control...............: Enabled
CPU Host Frequency (Mhz) ............: 476
PCI Express Frequency (Mhz) .........: 100 

Advanced Clock Control
CPU Clock Drive......................: 800mV
PCI Express Clock Drive..............: 900mV
CPU Clock Skew.......................: 0ps
MCH Clock Skew.......................: 0ps


DRAM Performance Control
Performance Enhance..................: Standard
Extreme Memory Profile (X.M.P.)......: auto
System Memory Multiplier ............: 2.00D
Memory Frequency (Mhz) ..............: 1000
DRAM Timing Selectable ..............: Manual



Standard Timing Control
CAS Latency Time.....................: 5
tRCD ................................: 5
tRP..................................: 5
tRAS.................................: 18

Advanced Timing Control
tRRD.................................: 3
tWTR.................................: 3
tWR..................................: 6
tRFC.................................: 52
tRTP.................................: 3
Command Rate (CMD) ..................: Auto


Channel A
Static tRead Value...................: 11 
Channel B
Static tRead Value...................: 11 



Motherboard Voltage Control
CPU
Load Line Calibration (LLC) .........: Disabled
CPU Vcore............................: 1.3
CPU Termination........1.200V........: 1.2
CPU PLL................1.500V........: normal
CPU Referen............0.760V........: normal

MCH/ICH
MCH Core...............1.100V........: 1.300
MCH Reference..........0.760V........: normal
MCH/DRAM Ref...........0.900V........: normal
ICH I/O................1.500V........: normal
ICH Core...............1.100V........: normal

DRAM
DRAM Voltage ..........1.800V........: 1.8
DRAM Termination ......0.900V........: .9
Channel A Reference ...0.900V........: normal
Channel B Reference ...0.900V........: normal
well hows it look?
seems like it likes to freez after 10-20 min of being turned on and it didnt do this when i had it set at 3.15 ghz(alls i did to get to 3.33 waz raise vcore and fsb)

and it did bsod once wile i waz in windows
sence its up that high do i gotta mess with ram also?
bump

any help
wats this
(13 items)
 
  
CPUMotherboardGraphicsRAM
faster then an amd gigerbyte er gtfo internal good ramz 
Hard DriveOSMonitorPower
there hard ha! not mac shows nice pic big 
Case
afro engeneered 
  hide details  
Reply
wats this
(13 items)
 
  
CPUMotherboardGraphicsRAM
faster then an amd gigerbyte er gtfo internal good ramz 
Hard DriveOSMonitorPower
there hard ha! not mac shows nice pic big 
Case
afro engeneered 
  hide details  
Reply
post #13853 of 21187
well everywhere i was reading i found most people were getting 1250+ and still maintaining 1.9v

i mean i have no problem going with G.Skills, i have seen most all of them overclock very well. but i am think 1250mhz @1.9v would be nice and cool.....
    
CPUMotherboardGraphicsRAM
2600k, 2700k, 34 lga 775 chippers z68x-ud4, MIVE, Commando's, and crap FX5500, 6970, 6670, 4890, and junk Team D9's/ Ballistix D9's, Muskin Hypers !! 
Hard DriveOptical DriveOSMonitor
C300 / WD 500 / 640 Caviar Blue Asus Lightscribe / LG Win7/Vista/XP/Server 08 EE Acer P235H 1920 X 1080 HD 
KeyboardPowerCaseMouse
Logitech Ill. Mushkin 1200 Joule CM690 II Adv/Tech Bench DiamondBack 3G 
Mouse Pad
eXactMat 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
2600k, 2700k, 34 lga 775 chippers z68x-ud4, MIVE, Commando's, and crap FX5500, 6970, 6670, 4890, and junk Team D9's/ Ballistix D9's, Muskin Hypers !! 
Hard DriveOptical DriveOSMonitor
C300 / WD 500 / 640 Caviar Blue Asus Lightscribe / LG Win7/Vista/XP/Server 08 EE Acer P235H 1920 X 1080 HD 
KeyboardPowerCaseMouse
Logitech Ill. Mushkin 1200 Joule CM690 II Adv/Tech Bench DiamondBack 3G 
Mouse Pad
eXactMat 
  hide details  
Reply
post #13854 of 21187
Then definitely hit up those OCZs mate. If there are as many people as you're alluding to getting those results, it's definitely not just a lucky catch for that other guy
Sandy Goodness
(17 items)
 
Sandy Mininess
(14 items)
 
Simply the best
(13 items)
 
CPUMotherboardGraphicsRAM
Intel i5 2500k @ 3.7GHz Gigabyte GA-Z68XP-UD4 EVGA GeForce GTX 760 2GB G.SKILL Ripjaws 16GB 4x4GB 2133MHz 
Hard DriveHard DriveHard DriveCooling
60GB OCZ Vertex 3 60GB OCZ Vertex 3 2x 1TB Western Digital Caviar Black (RAID 0) XSPC Rasa RX360 (CPU) 
OSOSMonitorKeyboard
Windows 8 x64 Professional ArchLinux x64 Dell UltraSharp U2312HM Das S Professional 
PowerCaseMouseAudio
Seasonic X650 Coolermaster HAF X Razer Naga Asus Xonar Essence STX 
CPUMotherboardGraphicsRAM
Something slow and mobile No idea The best Leaking 
Hard DriveOptical DriveOSMonitor
Not nearly enough for my CP It's removable! Linux - ta best!!!1!!! Bigger than yours 
KeyboardPowerCaseMouse
Mine has twenty eight keys A battery derrr Fat and blocky They scare elephants 
Mouse Pad
Useless 
  hide details  
Reply
Sandy Goodness
(17 items)
 
Sandy Mininess
(14 items)
 
Simply the best
(13 items)
 
CPUMotherboardGraphicsRAM
Intel i5 2500k @ 3.7GHz Gigabyte GA-Z68XP-UD4 EVGA GeForce GTX 760 2GB G.SKILL Ripjaws 16GB 4x4GB 2133MHz 
Hard DriveHard DriveHard DriveCooling
60GB OCZ Vertex 3 60GB OCZ Vertex 3 2x 1TB Western Digital Caviar Black (RAID 0) XSPC Rasa RX360 (CPU) 
OSOSMonitorKeyboard
Windows 8 x64 Professional ArchLinux x64 Dell UltraSharp U2312HM Das S Professional 
PowerCaseMouseAudio
Seasonic X650 Coolermaster HAF X Razer Naga Asus Xonar Essence STX 
CPUMotherboardGraphicsRAM
Something slow and mobile No idea The best Leaking 
Hard DriveOptical DriveOSMonitor
Not nearly enough for my CP It's removable! Linux - ta best!!!1!!! Bigger than yours 
KeyboardPowerCaseMouse
Mine has twenty eight keys A battery derrr Fat and blocky They scare elephants 
Mouse Pad
Useless 
  hide details  
Reply
post #13855 of 21187
Quote:
Originally Posted by ben h View Post
bump

any help
try enabling LLC, just to try it, im suprised the difference it made, i tried upping my volts across the board to make 4Ghz with no luck, but with LLC on im running 4 now and my volts are the same i needed to run 3.7 !
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9650 E0 @ 4Ghz GA-EP45-UD3P, rev 1.6, FE Bios 2x GTX275 SLI (xdevs SLI Patch) 4x 2Gb Kingston 1066 Hyper-x 
Hard DriveOSKeyboardPower
4x Seagate 1TB Windows 7 x64 (Linux Prefered Though) Typematrix 2030 Dvorak Thermaltake QFAN 850w 
Mouse
Razer Copperhead 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9650 E0 @ 4Ghz GA-EP45-UD3P, rev 1.6, FE Bios 2x GTX275 SLI (xdevs SLI Patch) 4x 2Gb Kingston 1066 Hyper-x 
Hard DriveOSKeyboardPower
4x Seagate 1TB Windows 7 x64 (Linux Prefered Though) Typematrix 2030 Dvorak Thermaltake QFAN 850w 
Mouse
Razer Copperhead 
  hide details  
Reply
post #13856 of 21187
Quote:
Originally Posted by haydent View Post
try enabling LLC, just to try it, im suprised the difference it made, i tried upping my volts across the board to make 4Ghz with no luck, but with LLC on im running 4 now and my volts are the same i needed to run 3.7 !
hmm k i guess ill try it




didnt work


blahh
worker 4 @ 8k keeps failing idk wat to do :/
Edited by ben h - 6/17/10 at 10:32pm
wats this
(13 items)
 
  
CPUMotherboardGraphicsRAM
faster then an amd gigerbyte er gtfo internal good ramz 
Hard DriveOSMonitorPower
there hard ha! not mac shows nice pic big 
Case
afro engeneered 
  hide details  
Reply
wats this
(13 items)
 
  
CPUMotherboardGraphicsRAM
faster then an amd gigerbyte er gtfo internal good ramz 
Hard DriveOSMonitorPower
there hard ha! not mac shows nice pic big 
Case
afro engeneered 
  hide details  
Reply
post #13857 of 21187
Quote:
Originally Posted by ben h View Post
hmm k i guess ill try it

didnt work

blahh
worker 4 @ 8k keeps failing idk wat to do :/
try reducing your MCH core, and or increasing your cpu vcore to 1.34375 with LLC enabled

see if either or both help you stress for longer.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9650 E0 @ 4Ghz GA-EP45-UD3P, rev 1.6, FE Bios 2x GTX275 SLI (xdevs SLI Patch) 4x 2Gb Kingston 1066 Hyper-x 
Hard DriveOSKeyboardPower
4x Seagate 1TB Windows 7 x64 (Linux Prefered Though) Typematrix 2030 Dvorak Thermaltake QFAN 850w 
Mouse
Razer Copperhead 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9650 E0 @ 4Ghz GA-EP45-UD3P, rev 1.6, FE Bios 2x GTX275 SLI (xdevs SLI Patch) 4x 2Gb Kingston 1066 Hyper-x 
Hard DriveOSKeyboardPower
4x Seagate 1TB Windows 7 x64 (Linux Prefered Though) Typematrix 2030 Dvorak Thermaltake QFAN 850w 
Mouse
Razer Copperhead 
  hide details  
Reply
post #13858 of 21187
Quote:
Originally Posted by freakb18c1 View Post
i used to tune with llc disabled all the time.. it has a massive inpact with temp @ linpack
for instance

id run 1.48750 llc disabled @ linx load vcore was 1.328 temps 68 - 71c
id run 1.38750 llc enabled @ linx load vcore was 1.328v temps 76- 80c

but then again when you are pushing past 4.3 you would need 1.5v+ without llc (depending on the vid) just my 2 cents
Ha! This is more proof that LLC should not be enabled! Thank you for posting this.

The lower temperature is an indication that the CPU is more "comfortable" when it's within Intel's specifications (LLC disabled). I mean, it's as if the CPU is under less stress and is working better.

Quote:
Originally Posted by Bal3Wolf View Post
How safe is letting the idle voltage be that high tho. I look at it this way llc keeps idle and load voltages low but with it off your idle can be very high and that could kill the cpu over time to.
But that value of 1.48750V is the BIOS-selected voltage. The idle voltage is likely about 1.36 - 1.38V which is still very safe.



Quote:
Originally Posted by ben h View Post
CPU = Q8400 don't you have a Q8200? The Q8400's multiplier goes up to 8x
Motherboard = EP45-UD3P
BIOS Version = FD


MB Intelligent Tweaker(M.I.T.)

Robust Graphics Booster .............: Auto
CPU Clock Ratio .....................: 8x (unless you have the Q8200)
Fine CPU Clock Ratio.................: -
CPU Frequency .......................: 3.352 GHz, or 3.353 GHz


Clock Chip Control

Standard Clock Control
CPU Host Clock Control...............: Enabled
CPU Host Frequency (Mhz) ............: 419 for the Q8400 using 8x, or 479 for the Q8200 using 7x
PCI Express Frequency (Mhz) .........: 100

Advanced Clock Control

CPU Clock Drive......................: 800mV
PCI Express Clock Drive..............: 900mV
CPU Clock Skew.......................: 0ps
MCH Clock Skew.......................: 0ps


DRAM Performance Control

Performance Enhance..................: Standard
Extreme Memory Profile (X.M.P.)......: Disabled
System Memory Multiplier ............: 2.00D
Memory Frequency (Mhz) ..............: 838
DRAM Timing Selectable ..............: Manual



Standard Timing Control
Make sure all 4 of these timings match what's printed on the stickers on your memory
CAS Latency Time.....................: 5
tRCD ................................: 5
tRP..................................: 5
tRAS.................................: 18

Advanced Timing Control

tRRD.................................: 3
tWTR.................................: 3
tWR..................................: 6
tRFC.................................: 54
tRTP.................................: 3
Command Rate (CMD) ..................: Auto


Channel A

Static tRead Value...................: 9 (it will probably still say 11 next to it, but that's fine)
Channel B
Static tRead Value...................: 9 (it will probably still say 11 next to it, but that's fine)



Motherboard Voltage Control

CPU
Load Line Calibration (LLC) .........: Disabled
CPU Vcore............................: 1.3(we may change this later)
CPU Termination........1.200V........: 1.240
CPU PLL................1.500V........: 1.570
CPU Referen............0.760V........: Auto

MCH/ICH

MCH Core...............1.100V........: 1.240 (because there's only a 2 x 2GB kit installed)
MCH Reference..........0.760V........: Set CPU Term to 1.200, set this to 0.760V, then raise CPU Term back up to 1.240 in order to scale this properly
MCH/DRAM Ref...........0.900V........: Auto
ICH I/O................1.500V........: 1.500
ICH Core...............1.100V........: 1.100

DRAM

DRAM Voltage ..........1.800V........: 1.8 (if 1.800V is what's printed on the sticker on your memory sticks, then so be it. If the stickers read something different, then enter that value here)
DRAM Termination ......0.900V........: Auto
Channel A Reference ...0.900V........: Auto
Channel B Reference ...0.900V........: Auto


well hows it look?
seems like it likes to freez after 10-20 min of being turned on and it didnt do this when i had it set at 3.15 ghz(alls i did to get to 3.33 waz raise vcore and fsb)

and it did bsod once wile i waz in windows
sence its up that high do i gotta mess with ram also?

any help o.0
Please make all of the underlined changes and then let's see what happens. And when I say "all", I mean "all" and not just "some". If you don't make every single one of these changes, then I will have wasted my time.
Edited by TwoCables - 6/18/10 at 4:30am
It's a computer!
(18 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveOptical DriveOptical Drive
250 GB Samsung 840 EVO (OS) 3 TB Toshiba P300 (storage) Samsung SH-S243N 24x DVD Burner Samsung SH-S203N 20X DVD Burner 
CoolingOSMonitorKeyboard
Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) Filco Majestouch 104-key Cherry MX Blues w/NKRO 
PowerCaseMouseMouse Pad
Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate Basic, but premium round 
AudioAudio
X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(18 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveOptical DriveOptical Drive
250 GB Samsung 840 EVO (OS) 3 TB Toshiba P300 (storage) Samsung SH-S243N 24x DVD Burner Samsung SH-S203N 20X DVD Burner 
CoolingOSMonitorKeyboard
Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) Filco Majestouch 104-key Cherry MX Blues w/NKRO 
PowerCaseMouseMouse Pad
Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate Basic, but premium round 
AudioAudio
X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #13859 of 21187
i should clarify i dont mean run LLC all the time, thats up to each person to decide, buts worth testing with it on to see what the influence. in my case it made massive difference to stability of system that increased voltage on other parts of the system couldn't bring. so its a quick way to find out if your cpu is having power fluctuation issues or its something else, ie mobo settings
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9650 E0 @ 4Ghz GA-EP45-UD3P, rev 1.6, FE Bios 2x GTX275 SLI (xdevs SLI Patch) 4x 2Gb Kingston 1066 Hyper-x 
Hard DriveOSKeyboardPower
4x Seagate 1TB Windows 7 x64 (Linux Prefered Though) Typematrix 2030 Dvorak Thermaltake QFAN 850w 
Mouse
Razer Copperhead 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9650 E0 @ 4Ghz GA-EP45-UD3P, rev 1.6, FE Bios 2x GTX275 SLI (xdevs SLI Patch) 4x 2Gb Kingston 1066 Hyper-x 
Hard DriveOSKeyboardPower
4x Seagate 1TB Windows 7 x64 (Linux Prefered Though) Typematrix 2030 Dvorak Thermaltake QFAN 850w 
Mouse
Razer Copperhead 
  hide details  
Reply
post #13860 of 21187
Quote:
Originally Posted by TwoCables View Post
Ha! This is more proof that LLC should not be enabled! Thank you for posting this.

The lower temperature is an indication that the CPU is more "comfortable" when it's within Intel's specifications (LLC disabled). I mean, it's as if the CPU is under less stress and is working better.


But that value of 1.48750V is the BIOS-selected voltage. The idle voltage is likely about 1.36 - 1.38V which is still very safe.

Well i have differt temps then what freak got with my llc on i get lower temps then with it off at the same vcore under load. And my vcore at idle will always be what i set it at in bios if i set 1.48 its 1.48 in windows till i put a load on it and it drops.
SABERWOLF
(18 items)
 
XEON-WOLF
(18 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7-6800K MSI X99A GAMING PRO CARBON EVGA GTX 1080 FTW Hydro Copper G.SKILL TridentZ Series 
Hard DriveCoolingCoolingCooling
Samsung EVO 850 500 EK-SBAY Dual DDC 3.2 PWM Serial Alphacool NexXxoS ST30 Full Copper Radiator 360 Hardware Labs Black Ice SR2 Multiport Black Car... 
CoolingCoolingOSMonitor
EK-CoolStream RAD XTC 420 koolance 380i Windows 10 Pro ASUS VW246H Black 24" 2ms 
PowerCaseMouseAudio
SeaSonic M12D SS-850 850W  Thermaltake core x71 CM Storm Sentinel Advance II Corsair Void 
CPUMotherboardGraphicsRAM
X5675@4400 1.344 ASUS P6X58D-E XfX RX480 RS F3-12800CL7T-6GBPI 6-7-6-21 1T 
RAMHard DriveHard DriveHard Drive
F3-12800CL9S-4GBRL WDC WD1001FALS-00J7B1 ST31000340AS WDC WD7500AAKS-00RBA0 
Hard DriveOptical DriveCoolingOS
Hitachi HDS723020BLA642 ihas 624-A SilverStone Heligon HE01 windows 10 64 Pro 
MonitorPowerCase
Vizio 42inch lcd tv CORSAIR CMPSU-950TX Modded Rocketfish 
  hide details  
Reply
SABERWOLF
(18 items)
 
XEON-WOLF
(18 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7-6800K MSI X99A GAMING PRO CARBON EVGA GTX 1080 FTW Hydro Copper G.SKILL TridentZ Series 
Hard DriveCoolingCoolingCooling
Samsung EVO 850 500 EK-SBAY Dual DDC 3.2 PWM Serial Alphacool NexXxoS ST30 Full Copper Radiator 360 Hardware Labs Black Ice SR2 Multiport Black Car... 
CoolingCoolingOSMonitor
EK-CoolStream RAD XTC 420 koolance 380i Windows 10 Pro ASUS VW246H Black 24" 2ms 
PowerCaseMouseAudio
SeaSonic M12D SS-850 850W  Thermaltake core x71 CM Storm Sentinel Advance II Corsair Void 
CPUMotherboardGraphicsRAM
X5675@4400 1.344 ASUS P6X58D-E XfX RX480 RS F3-12800CL7T-6GBPI 6-7-6-21 1T 
RAMHard DriveHard DriveHard Drive
F3-12800CL9S-4GBRL WDC WD1001FALS-00J7B1 ST31000340AS WDC WD7500AAKS-00RBA0 
Hard DriveOptical DriveCoolingOS
Hitachi HDS723020BLA642 ihas 624-A SilverStone Heligon HE01 windows 10 64 Pro 
MonitorPowerCase
Vizio 42inch lcd tv CORSAIR CMPSU-950TX Modded Rocketfish 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › Gigabyte EP45-UD3 Series Owners Guide