Overclock.net › Forums › Intel › Intel Motherboards › Gigabyte EP45-UD3 Series Owners Guide
New Posts  All Forums:Forum Nav:

Gigabyte EP45-UD3 Series Owners Guide - Page 1629

post #16281 of 21186
I didn't lap my 212+, but I did use a different method of applying the TIM that what you normally use on a heatsink with a solid base. The bottom method in this guide except you use three lines of TIM instead of two because the 212+ has four heatpipes rather than the three on the heatsink in the guide.

http://benchmarkreviews.com/index.ph...1&limitstart=5
442
(15 items)
 
Q6600
(14 items)
 
Piece O' Crappola
(13 items)
 
CPUMotherboardGraphicsRAM
Q9550 E0 DFI LanParty LT P35-T2R 2 x HD4670QT512P CF Patriot PVS24G8500ELKN 
CoolingOSMonitorPower
Stock pfsense Acer H233H Antec EarthWatts 430 
CaseAudio
custom onboard 
CPUMotherboardGraphicsRAM
Q6600 B3 Lapped @ 3.4 GA-EP45-UD3R EVGA 9600GSO 384m 96SP 4G (2x2) Patriot Viper PC2-8500 
Hard DriveOptical DriveCoolingOS
80g Maxtor, 320WDC. 320Seagate NEC ND-3550 & LiteOn CM Hyper 212+ w/PP Blademasters XP Pro SP3 
MonitorPowerCase
Acer H233H Rosewill RG630-S12 NZXT BetaEVO 
CPUMotherboardGraphicsRAM
E6420 GA-P35-DS3L GeForce 7300LE 2G PNY PC2-6400 
Hard DriveOptical DriveOSMonitor
80Gig WDC SATA NEC ND3540A Win 7 Ultimate 64bit/XP Pro Acer H233H 
PowerCase
Antec Earthwatts 430 none 
  hide details  
Reply
442
(15 items)
 
Q6600
(14 items)
 
Piece O' Crappola
(13 items)
 
CPUMotherboardGraphicsRAM
Q9550 E0 DFI LanParty LT P35-T2R 2 x HD4670QT512P CF Patriot PVS24G8500ELKN 
CoolingOSMonitorPower
Stock pfsense Acer H233H Antec EarthWatts 430 
CaseAudio
custom onboard 
CPUMotherboardGraphicsRAM
Q6600 B3 Lapped @ 3.4 GA-EP45-UD3R EVGA 9600GSO 384m 96SP 4G (2x2) Patriot Viper PC2-8500 
Hard DriveOptical DriveCoolingOS
80g Maxtor, 320WDC. 320Seagate NEC ND-3550 & LiteOn CM Hyper 212+ w/PP Blademasters XP Pro SP3 
MonitorPowerCase
Acer H233H Rosewill RG630-S12 NZXT BetaEVO 
CPUMotherboardGraphicsRAM
E6420 GA-P35-DS3L GeForce 7300LE 2G PNY PC2-6400 
Hard DriveOptical DriveOSMonitor
80Gig WDC SATA NEC ND3540A Win 7 Ultimate 64bit/XP Pro Acer H233H 
PowerCase
Antec Earthwatts 430 none 
  hide details  
Reply
post #16282 of 21186
Quote:
Originally Posted by joarangoe View Post
Hey guys, just a quick question...

Has anyone heard of temp reading issues with the UD3P? cause with this board Im having the CPU (TCase) report like a 5c average temp over the cores, when my old P35-UD3L reported Tcase like 3-4c lower thant the cores (usually the way it should be afaik).

Right now: prime small Ftt cores ~61c, CPU 66c :S

Im thinking of lapping my Xeon to help with the temps, and also the Hyper 212+ doesn't seem to have a perfectly flat base... I think it coul be improved with some elbow grease has anyone lapped the Hyper? Results?

Tnks!
eh ill doubt you see anything better then a 3c difference at load
post #16283 of 21186
Quote:
Originally Posted by TaranScorp View Post
One more question. I have 1066 ram but want to run it as 800 for now. So I set Driving Strength Profile in bios to 800 but bios still shows Memory Frequency at 1066. Is this normal also?
Quote:
Originally Posted by hoss331 View Post
If your wanting to set the ram speed you need to set the "System Memory Multipler" setting to whatever in going to get you closest to 800 for the fsb you are using.
This.

In addition, experiment with the CPU Host Frequency; try various combinations of different CPU Host Frequencies and System Memory Multipliers.
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #16284 of 21186
Ok, I'm running at 4.00GHz (400x10)and my ram is at 800Mhz.
What I really want to know what is the "Driving Strength Profile" for in the bios settings?
What does it accomplish when you set it at 800 instead of 1066 that the ram is rated for?
Edited by TaranScorp - 10/1/10 at 3:47pm
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
2500K Asrock Fatal1ty Z68 Professional iGPU 16GB Samsung 30nm 1.35 V DDR3  
Hard DriveOptical DriveCoolingOS
Samsung 830 SSD, Veli Raid 0, Samsung HD Raid 0 NEC,Pioneer,Lite-On,Ben-Q ThermaRight Archon Windows 7 64bit 
MonitorKeyboardPowerCase
Acer 223W LogiTech WireLess Keyboard CORSAIR CMPSU-850TX Cooler Master Storm Trooper 
Mouse
Logitech WireLess Mouse 
  hide details  
Reply
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
2500K Asrock Fatal1ty Z68 Professional iGPU 16GB Samsung 30nm 1.35 V DDR3  
Hard DriveOptical DriveCoolingOS
Samsung 830 SSD, Veli Raid 0, Samsung HD Raid 0 NEC,Pioneer,Lite-On,Ben-Q ThermaRight Archon Windows 7 64bit 
MonitorKeyboardPowerCase
Acer 223W LogiTech WireLess Keyboard CORSAIR CMPSU-850TX Cooler Master Storm Trooper 
Mouse
Logitech WireLess Mouse 
  hide details  
Reply
post #16285 of 21186
This thread over at TweakTown has a lot of information on Driving Strength Profile, what it does and how to use it.

http://forums.tweaktown.com/gigabyte...wottizzit.html
442
(15 items)
 
Q6600
(14 items)
 
Piece O' Crappola
(13 items)
 
CPUMotherboardGraphicsRAM
Q9550 E0 DFI LanParty LT P35-T2R 2 x HD4670QT512P CF Patriot PVS24G8500ELKN 
CoolingOSMonitorPower
Stock pfsense Acer H233H Antec EarthWatts 430 
CaseAudio
custom onboard 
CPUMotherboardGraphicsRAM
Q6600 B3 Lapped @ 3.4 GA-EP45-UD3R EVGA 9600GSO 384m 96SP 4G (2x2) Patriot Viper PC2-8500 
Hard DriveOptical DriveCoolingOS
80g Maxtor, 320WDC. 320Seagate NEC ND-3550 & LiteOn CM Hyper 212+ w/PP Blademasters XP Pro SP3 
MonitorPowerCase
Acer H233H Rosewill RG630-S12 NZXT BetaEVO 
CPUMotherboardGraphicsRAM
E6420 GA-P35-DS3L GeForce 7300LE 2G PNY PC2-6400 
Hard DriveOptical DriveOSMonitor
80Gig WDC SATA NEC ND3540A Win 7 Ultimate 64bit/XP Pro Acer H233H 
PowerCase
Antec Earthwatts 430 none 
  hide details  
Reply
442
(15 items)
 
Q6600
(14 items)
 
Piece O' Crappola
(13 items)
 
CPUMotherboardGraphicsRAM
Q9550 E0 DFI LanParty LT P35-T2R 2 x HD4670QT512P CF Patriot PVS24G8500ELKN 
CoolingOSMonitorPower
Stock pfsense Acer H233H Antec EarthWatts 430 
CaseAudio
custom onboard 
CPUMotherboardGraphicsRAM
Q6600 B3 Lapped @ 3.4 GA-EP45-UD3R EVGA 9600GSO 384m 96SP 4G (2x2) Patriot Viper PC2-8500 
Hard DriveOptical DriveCoolingOS
80g Maxtor, 320WDC. 320Seagate NEC ND-3550 & LiteOn CM Hyper 212+ w/PP Blademasters XP Pro SP3 
MonitorPowerCase
Acer H233H Rosewill RG630-S12 NZXT BetaEVO 
CPUMotherboardGraphicsRAM
E6420 GA-P35-DS3L GeForce 7300LE 2G PNY PC2-6400 
Hard DriveOptical DriveOSMonitor
80Gig WDC SATA NEC ND3540A Win 7 Ultimate 64bit/XP Pro Acer H233H 
PowerCase
Antec Earthwatts 430 none 
  hide details  
Reply
post #16286 of 21186
This is perfect timing as I am almost feeling ready to finally overclock my new memory, and the Driving Strength Profile was perhaps the most confusing setting I encountered while I browsed through the BIOS.
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #16287 of 21186
yea,
I see said the blind man to the deaf man

Now I'm reading up on the Static tRead setting.
For now changed it from auto to the number bios had for it.
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
2500K Asrock Fatal1ty Z68 Professional iGPU 16GB Samsung 30nm 1.35 V DDR3  
Hard DriveOptical DriveCoolingOS
Samsung 830 SSD, Veli Raid 0, Samsung HD Raid 0 NEC,Pioneer,Lite-On,Ben-Q ThermaRight Archon Windows 7 64bit 
MonitorKeyboardPowerCase
Acer 223W LogiTech WireLess Keyboard CORSAIR CMPSU-850TX Cooler Master Storm Trooper 
Mouse
Logitech WireLess Mouse 
  hide details  
Reply
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
2500K Asrock Fatal1ty Z68 Professional iGPU 16GB Samsung 30nm 1.35 V DDR3  
Hard DriveOptical DriveCoolingOS
Samsung 830 SSD, Veli Raid 0, Samsung HD Raid 0 NEC,Pioneer,Lite-On,Ben-Q ThermaRight Archon Windows 7 64bit 
MonitorKeyboardPowerCase
Acer 223W LogiTech WireLess Keyboard CORSAIR CMPSU-850TX Cooler Master Storm Trooper 
Mouse
Logitech WireLess Mouse 
  hide details  
Reply
post #16288 of 21186
And I set my Driving Strength Profile from Auto to OC-1200 just because I have the memory clock manually set to 1200MHz.
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #16289 of 21186
Quote:
Originally Posted by PapaSmurf View Post
I didn't lap my 212+, but I did use a different method of applying the TIM that what you normally use on a heatsink with a solid base. The bottom method in this guide except you use three lines of TIM instead of two because the 212+ has four heatpipes rather than the three on the heatsink in the guide.

http://benchmarkreviews.com/index.ph...1&limitstart=5
Thanks papa, I also applied that method for the tim... What about Tcase being higher than Tjunc? is that normal or is it a bug?
joarangoe's
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5 2500K ASUS P8P67 Pro 2 x Asus HD 6850 Direct CU Corsair Vengeance blu 4GB x 4 
Hard DriveOptical DriveCoolingOS
OCZ VERTEX2 60GB + WDC 640GB + F3 500GB LG DVD RW sata Hyper 212+ P/P Win 7 ultimate 64b 
MonitorKeyboardPowerCase
HannsG Hi221D Logitech G15 OCZ Stealthxtreme 600W Antec Three Hundred 
MouseMouse PadAudio
Logitech G700 SteelSeries Qck+ Creative X-Fi Titanium fatal1ty 
  hide details  
Reply
joarangoe's
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel i5 2500K ASUS P8P67 Pro 2 x Asus HD 6850 Direct CU Corsair Vengeance blu 4GB x 4 
Hard DriveOptical DriveCoolingOS
OCZ VERTEX2 60GB + WDC 640GB + F3 500GB LG DVD RW sata Hyper 212+ P/P Win 7 ultimate 64b 
MonitorKeyboardPowerCase
HannsG Hi221D Logitech G15 OCZ Stealthxtreme 600W Antec Three Hundred 
MouseMouse PadAudio
Logitech G700 SteelSeries Qck+ Creative X-Fi Titanium fatal1ty 
  hide details  
Reply
post #16290 of 21186
Quote:
Originally Posted by joarangoe View Post
Thanks papa, I also applied that method for the tim... What about Tcase being higher than Tjunc? is that normal or is it a bug?
In what program?
442
(15 items)
 
Q6600
(14 items)
 
Piece O' Crappola
(13 items)
 
CPUMotherboardGraphicsRAM
Q9550 E0 DFI LanParty LT P35-T2R 2 x HD4670QT512P CF Patriot PVS24G8500ELKN 
CoolingOSMonitorPower
Stock pfsense Acer H233H Antec EarthWatts 430 
CaseAudio
custom onboard 
CPUMotherboardGraphicsRAM
Q6600 B3 Lapped @ 3.4 GA-EP45-UD3R EVGA 9600GSO 384m 96SP 4G (2x2) Patriot Viper PC2-8500 
Hard DriveOptical DriveCoolingOS
80g Maxtor, 320WDC. 320Seagate NEC ND-3550 & LiteOn CM Hyper 212+ w/PP Blademasters XP Pro SP3 
MonitorPowerCase
Acer H233H Rosewill RG630-S12 NZXT BetaEVO 
CPUMotherboardGraphicsRAM
E6420 GA-P35-DS3L GeForce 7300LE 2G PNY PC2-6400 
Hard DriveOptical DriveOSMonitor
80Gig WDC SATA NEC ND3540A Win 7 Ultimate 64bit/XP Pro Acer H233H 
PowerCase
Antec Earthwatts 430 none 
  hide details  
Reply
442
(15 items)
 
Q6600
(14 items)
 
Piece O' Crappola
(13 items)
 
CPUMotherboardGraphicsRAM
Q9550 E0 DFI LanParty LT P35-T2R 2 x HD4670QT512P CF Patriot PVS24G8500ELKN 
CoolingOSMonitorPower
Stock pfsense Acer H233H Antec EarthWatts 430 
CaseAudio
custom onboard 
CPUMotherboardGraphicsRAM
Q6600 B3 Lapped @ 3.4 GA-EP45-UD3R EVGA 9600GSO 384m 96SP 4G (2x2) Patriot Viper PC2-8500 
Hard DriveOptical DriveCoolingOS
80g Maxtor, 320WDC. 320Seagate NEC ND-3550 & LiteOn CM Hyper 212+ w/PP Blademasters XP Pro SP3 
MonitorPowerCase
Acer H233H Rosewill RG630-S12 NZXT BetaEVO 
CPUMotherboardGraphicsRAM
E6420 GA-P35-DS3L GeForce 7300LE 2G PNY PC2-6400 
Hard DriveOptical DriveOSMonitor
80Gig WDC SATA NEC ND3540A Win 7 Ultimate 64bit/XP Pro Acer H233H 
PowerCase
Antec Earthwatts 430 none 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › Gigabyte EP45-UD3 Series Owners Guide