Overclock.net › Forums › Intel › Intel Motherboards › Gigabyte EP45-UD3 Series Owners Guide
New Posts  All Forums:Forum Nav:

Gigabyte EP45-UD3 Series Owners Guide - Page 1676

post #16751 of 21186
I'm finally testing 4.50 GHz! Here are my current settings (I haven't even truly tested it yet, however I am able to be here and post this without any problems):

Code:
CPU = E8400 E0
VID = 1.2500V
Motherboard = EP45-UD3P (Rev. 1.6)
BIOS Version = FFb
Ram = G.SKILL F2-9600CL5D-4GBPI


MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster .............: Auto
CPU Clock Ratio .....................: 9X
Fine CPU Clock Ratio.................: -
CPU Frequency .......................: 4.50 GHz


Clock Chip Control
Standard Clock Control
CPU Host Clock Control...............: Enabled
CPU Host Frequency (Mhz) ............: 500
PCI Express Frequency (Mhz) .........: 100 (set manually)


Advanced Clock Control
CPU Clock Drive......................: 800mV
PCI Express Clock Drive..............: 900mV
CPU Clock Skew.......................: 100ps
MCH Clock Skew.......................: 50ps


DRAM Performance Control
Performance Enhance..................: Standard
Extreme Memory Profile (X.M.P.)......: Disabled
(G)MCH Frequency Latch...............: Auto
System Memory Multiplier ............: 2.40B
Memory Frequency (Mhz) ..............: 1200
DRAM Timing Selectable ..............: Manual



Standard Timing Control
CAS Latency Time.....................: 7
tRCD ................................: 7
tRP..................................: 7
tRAS.................................: 20

Advanced Timing Control
tRRD.................................: 6
tWTR.................................: 6
tWR..................................: 8
tRFC.................................: 54
tRTP.................................: 6
Command Rate (CMD) ..................: Auto


Channel A
Static tRead Value...................: Auto
Channel B
Static tRead Value...................: Auto



Motherboard Voltage Control

CPU
Load Line Calibration (LLC) .........: Enabled
CPU Vcore............................: 1.42500
CPU Termination.....1.200V*..........: 1.420
CPU PLL.............1.500V*..........: 1.610
CPU Referen.........0.760V*..........: 0.785 (0.924)

MCH/ICH
MCH Core............1.100V...........: 1.340
MCH Reference.......0.800V...........: 0.720 (0.859)
MCH/DRAM Ref........0.900V...........: Auto
ICH I/O.............1.500V...........: 1.570
ICH Core............1.100V...........: 1.200

DRAM
DRAM Voltage .........1.800V.........: 2.200 (2.180V actual)
DRAM Termination .....0.900V.........: Auto
Channel A Reference ..0.900V.........: Auto
Channel B Reference ..0.900V.........: Auto



Yeah, that's right: I am using LLC. lol

But now it took a bit of trial & error for me to actually finally be able to come here and post this.

So anyway, here I go with quick LinX run using 95-96% memory. I'll post my results in a new reply after this one.

It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #16752 of 21186
Thread Starter 
I'm liking it Cables
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
post #16753 of 21186
Is this just a test run or are you shooting for 24/7 at this speed? Good luck can't wait to see the outcome.
post #16754 of 21186
Every single time I ran LinX, I got BSOD code 124 at the very beginning of the test. So then I bumped up the vcore to 1.45000 in the BIOS, but I still got that BSOD right at the beginning. So now I increased the MCH core and I'm going to try it again.

Here are my current settings:

Code:
CPU = E8400 E0
VID = 1.2500V
Motherboard = EP45-UD3P (Rev. 1.6)
BIOS Version = FFb
Ram = G.SKILL F2-9600CL5D-4GBPI


MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster .............: Auto
CPU Clock Ratio .....................: 9X
Fine CPU Clock Ratio.................: -
CPU Frequency .......................: 4.50 GHz


Clock Chip Control
Standard Clock Control
CPU Host Clock Control...............: Enabled
CPU Host Frequency (Mhz) ............: 500
PCI Express Frequency (Mhz) .........: 100 (set manually)


Advanced Clock Control
CPU Clock Drive......................: 800mV
PCI Express Clock Drive..............: 900mV
CPU Clock Skew.......................: 100ps
MCH Clock Skew.......................: 50ps


DRAM Performance Control
Performance Enhance..................: Standard
Extreme Memory Profile (X.M.P.)......: Disabled
(G)MCH Frequency Latch...............: Auto
System Memory Multiplier ............: 2.40B
Memory Frequency (Mhz) ..............: 1200
DRAM Timing Selectable ..............: Manual



Standard Timing Control
CAS Latency Time.....................: 7
tRCD ................................: 7
tRP..................................: 7
tRAS.................................: 20

Advanced Timing Control
tRRD.................................: 6
tWTR.................................: 6
tWR..................................: 8
tRFC.................................: 54
tRTP.................................: 6
Command Rate (CMD) ..................: Auto


Channel A
Static tRead Value...................: Auto
Channel B
Static tRead Value...................: Auto



Motherboard Voltage Control

CPU
Load Line Calibration (LLC) .........: Enabled
CPU Vcore............................: 1.45000
CPU Termination.....1.200V*..........: 1.420
CPU PLL.............1.500V*..........: 1.610
CPU Referen.........0.760V*..........: 0.785 (0.924)

MCH/ICH
MCH Core............1.100V...........: 1.400
MCH Reference.......0.800V...........: 0.720 (0.859)
MCH/DRAM Ref........0.900V...........: Auto
ICH I/O.............1.500V...........: 1.570
ICH Core............1.100V...........: 1.200

DRAM
DRAM Voltage .........1.800V.........: 2.200 (2.180V actual)
DRAM Termination .....0.900V.........: Auto
Channel A Reference ..0.900V.........: Auto
Channel B Reference ..0.900V.........: Auto

I am expecting to get the BSOD again.

Quote:
Originally Posted by grillinman View Post
Is this just a test run or are you shooting for 24/7 at this speed? Good luck can't wait to see the outcome.
I'm actually shooting for 24/7.
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #16755 of 21186
Yep! I got that BSOD code 124 again. So then I increased the vcore and got 1.440V in CPU-Z and still got that BSOD.

So, I think I'll just stick with 4.0 GHz unless I can achieve 4.50 GHz with 1.440V or less by some other means - like maybe there's something else in the BIOS I should change that I don't know about yet.
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #16756 of 21186
hey 2 , what vid is that chip again?
post #16757 of 21186
Quote:
Originally Posted by TwoCables View Post
Yep! I got that BSOD code 124 again. So then I increased the vcore and got 1.440V in CPU-Z and still got that BSOD.

So, I think I'll just stick with 4.0 GHz unless I can achieve 4.50 GHz with 1.440V or less by some other means - like maybe there's something else in the BIOS I should change that I don't know about yet.
Have you tried setting to "Optimized Defaults" first before changing your settings? I assume you have but if not do that, boot with those settings, then restart and change your BIOS to what you're going for (4.5Ghz as it were).

I only say this because when I was "re-tooling" my current OC I was having one heck of a time getting it to POST. My chip (or mobo not sure which) just doesn't seem to like the voltage changes (way up OR down) unless I reset the BIOS to default first.

Idk, it's worth a shot?
post #16758 of 21186
Quote:
Originally Posted by freakb18c1 View Post
hey 2 , what vid is that chip again?
1.2500V.

It's in my MIT.

Quote:
Originally Posted by grillinman View Post
Have you tried setting to "Optimized Defaults" first before changing your settings? I assume you have but if not do that, boot with those settings, then restart and change your BIOS to what you're going for (4.5Ghz as it were).

I only say this because when I was "re-tooling" my current OC I was having one heck of a time getting it to POST. My chip (or mobo not sure which) just doesn't seem to like the voltage changes (way up OR down) unless I reset the BIOS to default first.

Idk, it's worth a shot?
But then I'd have to reconfigure my other settings, such as the way I have the Integrated Peripherals customized.

But no, I haven't even considered doing it. I didn't consider it or even think about it because I didn't know that it was something that might help.

Do you have Quick Boot enabled?
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #16759 of 21186
Quote:
Originally Posted by TwoCables View Post
1.2500V.

It's in my MIT.


But then I'd have to reconfigure my other settings, such as the way I have the Integrated Peripherals customized.

But no, I haven't even considered doing it. I didn't consider it or even think about it because I didn't know that it was something that might help.

Do you have Quick Boot enabled?
I don't have quick boot enabled.

It might help it might not.

The quest for the holy grail is littered with peril and traps but stay the course and you may just find what you're looking for.
post #16760 of 21186
ah 1.2500 vid will need more then 1.4500
but! use the same settings you have and shoot 4.4!
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › Gigabyte EP45-UD3 Series Owners Guide