Overclock.net › Forums › Intel › Intel Motherboards › Gigabyte EP45-UD3 Series Owners Guide
New Posts  All Forums:Forum Nav:

Gigabyte EP45-UD3 Series Owners Guide - Page 1677

post #16761 of 21186
Quote:
Originally Posted by freakb18c1 View Post
ah 1.2500 vid will need more then 1.4500
but! use the same settings you have and shoot 4.4!
I just might. But am I right in being concerned about using 1.440V (CPU-Z) 24/7?
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #16762 of 21186
Quote:
Originally Posted by TwoCables View Post
Yep! I got that BSOD code 124 again. So then I increased the vcore and got 1.440V in CPU-Z and still got that BSOD.

So, I think I'll just stick with 4.0 GHz unless I can achieve 4.50 GHz with 1.440V or less by some other means - like maybe there's something else in the BIOS I should change that I don't know about yet.
well i tried 10 UD3P's and a E8500 and E8600 in the last month and 1/2 and before that my 4 other UD3P/R's and E3110/E8400/E8500 all did 9x500@4500 ddr2-1200 using this template.the only thing needed to change with all this hardware was the vcore and vdimm(different ram).so you can give it a go and see if this helps getting 4.5GHz with less than 1.44v(cpuz).
the voltage below worked for my G.skill pc9600 kits

Code:
DUAL CORE TEMPLATE
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster .............: Auto
CPU Clock Ratio .....................: 9X
Fine CPU Clock Ratio.................: -
CPU Frequency .......................: 4.50 GHz


Clock Chip Control
Standard Clock Control
CPU Host Clock Control...............: Enabled
CPU Host Frequency (Mhz) ............: 500
PCI Express Frequency (Mhz) .........: 101(set manually)


Advanced Clock Control
CPU Clock Drive......................: 800mV
PCI Express Clock Drive..............: 900mV
CPU Clock Skew.......................: 0ps
MCH Clock Skew.......................: 0ps


DRAM Performance Control
Performance Enhance..................: turbo
Extreme Memory Profile (X.M.P.)......: Disabled
(G)MCH Frequency Latch...............: 333
System Memory Multiplier ............: 2.40B
Memory Frequency (Mhz) ..............: 1200
DRAM Timing Selectable ..............: Manual



Standard Timing Control
CAS Latency Time.....................: 5
tRCD ................................: 5
tRP..................................: 5
tRAS.................................: 15

Advanced Timing Control
tRRD.................................: Auto
tWTR.................................: Auto
tWR..................................: Auto
tRFC.................................: 56
tRTP.................................: Auto
Command Rate (CMD) ..................: Auto


Channel A
Static tRead Value...................: 8 or 9
Channel B
Static tRead Value...................: 8 or 9



Motherboard Voltage Control

CPU
Load Line Calibration (LLC) .........: Enabled
CPU Vcore............................: 1.36v to 1.45v depends on vid
CPU Termination.....1.200V*..........: 1.28v
CPU PLL.............1.500V*..........: 1.57v
CPU Referen.........0.760V*..........: Normal

MCH/ICH
MCH Core............1.100V...........: 1.38v
MCH Reference.......0.800V...........: 0.750v
MCH/DRAM Ref........0.900V...........: Normal
ICH I/O.............1.500V...........: Normal
ICH Core............1.100V...........: Normal

DRAM
DRAM Voltage .........1.800V.........: 2.12v your kit might need more
DRAM Termination .....0.900V.........: Normal
Channel A Reference ..0.900V.........: Normal
Channel B Reference ..0.900V.........: Normal
    
CPUMotherboardGraphicsRAM
AMD A6-3650 8.32GHz so close Gigabyte A75M-UD2H sapphire HD3450 2x2GB DDR3-1600 
Hard DriveOptical DriveOSMonitor
western digital 320GB ASUS DRW-24B1ST DVD Microsoft Windows 7 Ultimate x64 ASUS LED 23.6" MS246H 
PowerCase
Corsair 400W cardboard box w/lots of holes for fans 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
AMD A6-3650 8.32GHz so close Gigabyte A75M-UD2H sapphire HD3450 2x2GB DDR3-1600 
Hard DriveOptical DriveOSMonitor
western digital 320GB ASUS DRW-24B1ST DVD Microsoft Windows 7 Ultimate x64 ASUS LED 23.6" MS246H 
PowerCase
Corsair 400W cardboard box w/lots of holes for fans 
  hide details  
Reply
post #16763 of 21186
Quote:
Originally Posted by radaja View Post
well i tried 10 UD3P's and a E8500 and E8600 in the last month and 1/2 and before that my 4 other UD3P/R's and E3110/E8400/E8500 all did 9x500@4500 ddr2-1200 using this template.the only thing needed to change with all this hardware was the vcore and vdimm(different ram).so you can give it a go and see if this helps getting 4.5GHz with less than 1.44v(cpuz).
the voltage below worked for my G.skill pc9600 kits

Code:
DUAL CORE TEMPLATE
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster .............: Auto
CPU Clock Ratio .....................: 9X
Fine CPU Clock Ratio.................: -
CPU Frequency .......................: 4.50 GHz


Clock Chip Control
Standard Clock Control
CPU Host Clock Control...............: Enabled
CPU Host Frequency (Mhz) ............: 500
PCI Express Frequency (Mhz) .........: 101(set manually)


Advanced Clock Control
CPU Clock Drive......................: 800mV
PCI Express Clock Drive..............: 900mV
CPU Clock Skew.......................: 0ps
MCH Clock Skew.......................: 0ps


DRAM Performance Control
Performance Enhance..................: turbo
Extreme Memory Profile (X.M.P.)......: Disabled
(G)MCH Frequency Latch...............: 333
System Memory Multiplier ............: 2.40B
Memory Frequency (Mhz) ..............: 1200
DRAM Timing Selectable ..............: Manual



Standard Timing Control
CAS Latency Time.....................: 5
tRCD ................................: 5
tRP..................................: 5
tRAS.................................: 15

Advanced Timing Control
tRRD.................................: Auto
tWTR.................................: Auto
tWR..................................: Auto
tRFC.................................: 56
tRTP.................................: Auto
Command Rate (CMD) ..................: Auto


Channel A
Static tRead Value...................: 8 or 9
Channel B
Static tRead Value...................: 8 or 9



Motherboard Voltage Control

CPU
Load Line Calibration (LLC) .........: Enabled
CPU Vcore............................: 1.36v to 1.45v depends on vid
CPU Termination.....1.200V*..........: 1.28v
CPU PLL.............1.500V*..........: 1.57v
CPU Referen.........0.760V*..........: Normal

MCH/ICH
MCH Core............1.100V...........: 1.38v
MCH Reference.......0.800V...........: 0.750v
MCH/DRAM Ref........0.900V...........: Normal
ICH I/O.............1.500V...........: Normal
ICH Core............1.100V...........: Normal

DRAM
DRAM Voltage .........1.800V.........: 2.12v your kit might need more
DRAM Termination .....0.900V.........: Normal
Channel A Reference ..0.900V.........: Normal
Channel B Reference ..0.900V.........: Normal
I'll probably try this soon. I'm still concerned that I'll need 1.440V 24/7 which isn't exactly a good thing for poor people. hehehe
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #16764 of 21186
Quote:
Originally Posted by TwoCables View Post
I just might. But am I right in being concerned about using 1.440V (CPU-Z) 24/7?
your chip will be fine
post #16765 of 21186
Thread Starter 
Cables, try VTT. + or - a few. Don't give up that easily.

your chip will be fine

You worry to much.
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
post #16766 of 21186
Quote:
Originally Posted by freakb18c1 View Post
your chip will be fine
Thank you!

Quote:
Originally Posted by NoGuru View Post
Cables, try VTT. + or - a few. Don't give up that easily.
Or minus? Oh really...

Quote:
Originally Posted by NoGuru View Post
your chip will be fine

You worry to much.
Indeed I do. Thank you! I guess I keep thinking about that 1.45V maximum stated by Intel.
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #16767 of 21186
Thread Starter 
Quote:
Originally Posted by TwoCables View Post

Indeed I do. Thank you! I guess I keep thinking about that 1.45V maximum stated by Intel.
Don't get me wrong, it can be good to play safe and by the rules but if everyone did that...well bla.

It's not a set line were if you give it from 1.45 to 1.46 POOF, smoke and flames.

What I'm saying is that if temps are good and you are stable, don't be nervous about turning it up a bit.
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
post #16768 of 21186
Quote:
Originally Posted by NoGuru View Post
Don't get me wrong, it can be good to play safe and by the rules but if everyone did that...well bla.

It's not a set line were if you give it from 1.45 to 1.46 POOF, smoke and flames.

What I'm saying is that if temps are good and you are stable, don't be nervous about turning it up a bit.
I fully understand that it's ok to go over 1.45V actual (CPU-Z), but it's just uncomfortable to think about using 1.440V 24/7 due to my lack of knowledge and experience.

Granted, I am hoping to upgrade to a Q9550 or even a Q9650 sometime in the next few months, but still!
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
post #16769 of 21186
is anybody running the new FFb bios yet? besides me?
Primary
(16 items)
 
   
CPUMotherboardGraphicsRAM
Q9450 Gigabyte EP45-UD3P Powercolor PCS+ HD7870 Myst 4x 2GB G.skill DDR2 1100 
Hard DriveHard DriveHard DriveOptical Drive
OCZ Vertex 3 120GB WD Velociraptor 300GB Caviar Green 500GB LG 24x Super-Multi 
CoolingOSMonitorPower
Thermalright Venomous-X RT Win 7 Home Premium x64 ASUS VH222H Corsair HX650 
CaseMouseAudio
Corsair 600T SE White Cyborg R.A.T. 7 AKG K 702 
  hide details  
Reply
Primary
(16 items)
 
   
CPUMotherboardGraphicsRAM
Q9450 Gigabyte EP45-UD3P Powercolor PCS+ HD7870 Myst 4x 2GB G.skill DDR2 1100 
Hard DriveHard DriveHard DriveOptical Drive
OCZ Vertex 3 120GB WD Velociraptor 300GB Caviar Green 500GB LG 24x Super-Multi 
CoolingOSMonitorPower
Thermalright Venomous-X RT Win 7 Home Premium x64 ASUS VH222H Corsair HX650 
CaseMouseAudio
Corsair 600T SE White Cyborg R.A.T. 7 AKG K 702 
  hide details  
Reply
post #16770 of 21186
Quote:
Originally Posted by clark_b View Post
is anybody running the new FFb bios yet? besides me?
I am. But the reason why I'm using it is because it fixes the "SMART command failed" message during bootup due to using a Sandforce-driven solid state drive.

Otherwise, I'd still be using FE.

And actually, I am the reason why FFb was created. I asked lsdmeasp about my "SMART command failed" error, and the next thing I knew, Gigabyte made FFb for me.
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
It's a computer!
(19 items)
 
  
CPUMotherboardGraphicsRAM
i5-2500K @ 4.5GHz (1.368-1.384V fixed voltage) ASUS P8P67 EVO B3 (UEFI ver. 1850) GTX 780 ASUS DirectCU II (1228 / 6300, 1.180V) G.SKILL Ripjaws X 8GB (2 x 4GB) 1866MHz, CL9 
Hard DriveHard DriveHard DriveOptical Drive
250 GB Samsung 840 EVO (C:\) 250 GB Samsung 840 EVO (D:\) 150 GB WD VelociRaptor Samsung SH-S243N 24x DVD Burner 
Optical DriveCoolingOSMonitor
Samsung SH-S203N 20X DVD Burner Thermaltake Frio Win 7 Home Premium x64 SP1 Retail AOC G2460PG (24" 1920 x 1080 144Hz G-SYNC) 
KeyboardPowerCaseMouse
Filco Majestouch 104-key Cherry MX Blues w/NKRO Corsair HX650 (Bronze, ordered on 12-12-2009) CM 690 Intellimouse Optical (1.1A) 1000Hz polling rate 
Mouse PadAudioAudio
Basic, but premium round X-Fi Titanium HD Klipsch ProMedia 2.1 (with 16 AWG Monster Cable... 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › Gigabyte EP45-UD3 Series Owners Guide