Overclock.net › Forums › Intel › Intel Motherboards › Gigabyte EP45-UD3 Series Owners Guide
New Posts  All Forums:Forum Nav:

Gigabyte EP45-UD3 Series Owners Guide - Page 1702

post #17011 of 21187
This is what I was using for 3.6GHz on mine with PC2-6400 ram.


CPU = Q6600 (B3) Vid 1.2875
Motherboard = ud3p
BIOS Version = FE
Ram = 800

MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster .............: Auto
CPU Clock Ratio .....................: x9
Fine CPU Clock Ratio.................:
CPU Frequency .......................: 400


Clock Chip Control
Standard Clock Control
CPU Host Clock Control...............:
CPU Host Frequency (Mhz) ............: 400
PCI Express Frequency (Mhz) .........: 100


DRAM Performance Control
Performance Enhance..................:
Extreme Memory Profile (X.M.P.)......: standard
(G)MCH Frequency Latch...............: 400
System Memory Multiplier ............: 2.00D
Memory Frequency (Mhz) ..............: 800
DRAM Timing Selectable ..............: Manual

Standard Timing Control
CAS Latency Time.....................:
tRCD ................................:
tRP..................................:
tRAS.................................:


Advanced Timing Control
tRRD.................................:
tWTR.................................:
tWR..................................:
tRFC.................................:
tRTP.................................:
Command Rate (CMD) ..................:


Channel A
Static tRead Value...................:
Channel B
Static tRead Value...................:

Advance clock control
CPU clock drive......................: 800mV
PCI-E clock drive....................: 900mV
CPU clock skew.......................: 50ps
MCH clock skew.......................: 100ps


Motherboard Voltage Control
CPU
Load Line Calibration (LLC) .........: E
CPU Vcore............................: 1.50
CPU Termination.....1.200V*..........: 1.30
CPU PLL.............1.500V*..........: 1.57
CPU Referen.........0.755V*..........: 0.863

MCH/ICH
MCH Core............1.100V...........: 1.40
MCH Reference.......0.800V...........: 0.863
MCH/DRAM Ref........0.900V...........: auto
ICH I/O.............1.500V...........: 1.50
ICH Core............1.100V...........: 1.10

DRAM
DRAM Voltage .........1.800V.........: 1.96
DRAM Termination .....0.900V.........: 1.03
Channel A Reference ..0.900V.........: auto
Channel B Reference ..0.900V.........: auto
442
(15 items)
 
Q6600
(14 items)
 
Piece O' Crappola
(13 items)
 
CPUMotherboardGraphicsRAM
Q9550 E0 DFI LanParty LT P35-T2R 2 x HD4670QT512P CF Patriot PVS24G8500ELKN 
CoolingOSMonitorPower
Stock pfsense Acer H233H Antec EarthWatts 430 
CaseAudio
custom onboard 
CPUMotherboardGraphicsRAM
Q6600 B3 Lapped @ 3.4 GA-EP45-UD3R EVGA 9600GSO 384m 96SP 4G (2x2) Patriot Viper PC2-8500 
Hard DriveOptical DriveCoolingOS
80g Maxtor, 320WDC. 320Seagate NEC ND-3550 & LiteOn CM Hyper 212+ w/PP Blademasters XP Pro SP3 
MonitorPowerCase
Acer H233H Rosewill RG630-S12 NZXT BetaEVO 
CPUMotherboardGraphicsRAM
E6420 GA-P35-DS3L GeForce 7300LE 2G PNY PC2-6400 
Hard DriveOptical DriveOSMonitor
80Gig WDC SATA NEC ND3540A Win 7 Ultimate 64bit/XP Pro Acer H233H 
PowerCase
Antec Earthwatts 430 none 
  hide details  
Reply
442
(15 items)
 
Q6600
(14 items)
 
Piece O' Crappola
(13 items)
 
CPUMotherboardGraphicsRAM
Q9550 E0 DFI LanParty LT P35-T2R 2 x HD4670QT512P CF Patriot PVS24G8500ELKN 
CoolingOSMonitorPower
Stock pfsense Acer H233H Antec EarthWatts 430 
CaseAudio
custom onboard 
CPUMotherboardGraphicsRAM
Q6600 B3 Lapped @ 3.4 GA-EP45-UD3R EVGA 9600GSO 384m 96SP 4G (2x2) Patriot Viper PC2-8500 
Hard DriveOptical DriveCoolingOS
80g Maxtor, 320WDC. 320Seagate NEC ND-3550 & LiteOn CM Hyper 212+ w/PP Blademasters XP Pro SP3 
MonitorPowerCase
Acer H233H Rosewill RG630-S12 NZXT BetaEVO 
CPUMotherboardGraphicsRAM
E6420 GA-P35-DS3L GeForce 7300LE 2G PNY PC2-6400 
Hard DriveOptical DriveOSMonitor
80Gig WDC SATA NEC ND3540A Win 7 Ultimate 64bit/XP Pro Acer H233H 
PowerCase
Antec Earthwatts 430 none 
  hide details  
Reply
post #17012 of 21187
Quote:
Originally Posted by Cool Blaze View Post
So you are saying that I should find the min voltage for the CPU term to get it 100% stable @ say 3.6Ghz--to find the proper refs.--because it affects the value of the refs? Then once I find refs. that work @ 3.6Ghz I just raise the CPU Term when I raise the frequency?
Yes, exactly what Im saying, use whatever you need to get stable with both Ref voltages at Auto, lowering your overclock is the easiest. So if its 3.4 3.5 3.6 whatever, that doesnt matter....
Quote:
Originally Posted by Cool Blaze View Post
Are you saying I should set the value to 0.760 as a default number rather than setting it to auto to start?
Nope, I used .760 as an example of a default setting. Just set to Auto, when on Auto you will see the default setting in bios to the left of the Auto setting.. It varies from cpu/mobo

Quote:
Originally Posted by Cool Blaze View Post
Also you didn't say if I should set the MHC ref. to auto and test values for the CPU ref., should I? I'm not exactly sure how they affect each other.
Once at a stable setting, you test each Ref voltage with the other at Auto.
If you test the CPU Ref first and find its stable 2 or 3 spots higher then whatever Auto puts it at, then you can leave that there when you test the MCH Ref because you know the CPU Ref is stable from the previous test..

For testing I recommend using a 50 - 100 pass Intel Burn Test, once that completes successfully then do a 12 hour Prime95 Blend..

This is time consuming, but it will get you a stable OC with the Ref voltage setting you need..

Ref voltages are "fine tuning" your voltages as I like to put it...
The Money Pit
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7-950 - 4.24 @ 1.40v Batch #3941B089 EVGA X58 SLI LE MSI 580 GTX Lightning - 950/1900/2200 @ 1.1v 6GB Mushkin @ 1475 - 6-8-6-24 
Hard DriveHard DriveOptical DriveCooling
120GB Vertex Plus 2 x 500GB WD Blues RAID0 Lite-On DVD/CD Custom H20 Loop 
OSMonitorPowerCase
Win 7 Ulti-64 25" I-Inc iH253 Antec TruePower New TP-750 CoolerMaster HAF 932 
  hide details  
Reply
The Money Pit
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7-950 - 4.24 @ 1.40v Batch #3941B089 EVGA X58 SLI LE MSI 580 GTX Lightning - 950/1900/2200 @ 1.1v 6GB Mushkin @ 1475 - 6-8-6-24 
Hard DriveHard DriveOptical DriveCooling
120GB Vertex Plus 2 x 500GB WD Blues RAID0 Lite-On DVD/CD Custom H20 Loop 
OSMonitorPowerCase
Win 7 Ulti-64 25" I-Inc iH253 Antec TruePower New TP-750 CoolerMaster HAF 932 
  hide details  
Reply
post #17013 of 21187
Thanks PapaSmurf, I'll give that a try. Is that voltage too high for a Q6600? My max temps running Prime95 at 3.2GHz and the voltage I listed was 47,46,46,43 (according to CoreTemp)
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 G0 Gigabyte GA-EP45-UD3P HD 4870 1gb Mushkin DDR2 6400 
Hard DriveOSMonitorKeyboard
Western Digital Caviar Black Vista 64bit Sceptre 24" LCD Razer Lycosa 
PowerCaseMouse
Cooler Master RS-650 NZXT Tempest Logitech G5 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 G0 Gigabyte GA-EP45-UD3P HD 4870 1gb Mushkin DDR2 6400 
Hard DriveOSMonitorKeyboard
Western Digital Caviar Black Vista 64bit Sceptre 24" LCD Razer Lycosa 
PowerCaseMouse
Cooler Master RS-650 NZXT Tempest Logitech G5 
  hide details  
Reply
post #17014 of 21187
Quote:
Originally Posted by abosnowman View Post
Thanks PapaSmurf, I'll give that a try. Is that voltage too high for a Q6600? My max temps running Prime95 at 3.2GHz and the voltage I listed was 47,46,46,43 (according to CoreTemp)
Up to 1.50v is safe so long as your temps are good, which they do look fine...

Max safe temp is below 72c, programs like Prime push it alot harder than any real world App or Game will....
The Money Pit
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7-950 - 4.24 @ 1.40v Batch #3941B089 EVGA X58 SLI LE MSI 580 GTX Lightning - 950/1900/2200 @ 1.1v 6GB Mushkin @ 1475 - 6-8-6-24 
Hard DriveHard DriveOptical DriveCooling
120GB Vertex Plus 2 x 500GB WD Blues RAID0 Lite-On DVD/CD Custom H20 Loop 
OSMonitorPowerCase
Win 7 Ulti-64 25" I-Inc iH253 Antec TruePower New TP-750 CoolerMaster HAF 932 
  hide details  
Reply
The Money Pit
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7-950 - 4.24 @ 1.40v Batch #3941B089 EVGA X58 SLI LE MSI 580 GTX Lightning - 950/1900/2200 @ 1.1v 6GB Mushkin @ 1475 - 6-8-6-24 
Hard DriveHard DriveOptical DriveCooling
120GB Vertex Plus 2 x 500GB WD Blues RAID0 Lite-On DVD/CD Custom H20 Loop 
OSMonitorPowerCase
Win 7 Ulti-64 25" I-Inc iH253 Antec TruePower New TP-750 CoolerMaster HAF 932 
  hide details  
Reply
post #17015 of 21187
Running Prime now at 3.6GHz so far so good. Voltage is still below 1.5 (1.47ish I believe. forgot to write it down). Max temps so far are 62,62,61,58. I wonder why one core is less than the others. Also, I noticed when I logged into windows the display had particles. I could still see everything, but the particles were noticeable. It happened a couple more times but as of right now it's fine. Don't really know how to explain how it looked, though. Any ideas of what it could be?

EDIT: Just got bluescreen and computer rebooted. Here's the info windows gave me, if it helps.

Code:
Problem signature:
  Problem Event Name:BlueScreen
  OS Version:6.0.6002.2.2.0.768.3
  Locale ID:1033

Additional information about the problem:
  BCCode:124
  BCP1:0000000000000000
  BCP2:FFFFFA8006BE5030
  BCP3:00000000B2000040
  BCP4:0000000000000800
  OS Version:6_0_6002
  Service Pack:2_0
  Product:768_1

Edited by abosnowman - 11/6/10 at 12:59pm
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 G0 Gigabyte GA-EP45-UD3P HD 4870 1gb Mushkin DDR2 6400 
Hard DriveOSMonitorKeyboard
Western Digital Caviar Black Vista 64bit Sceptre 24" LCD Razer Lycosa 
PowerCaseMouse
Cooler Master RS-650 NZXT Tempest Logitech G5 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 G0 Gigabyte GA-EP45-UD3P HD 4870 1gb Mushkin DDR2 6400 
Hard DriveOSMonitorKeyboard
Western Digital Caviar Black Vista 64bit Sceptre 24" LCD Razer Lycosa 
PowerCaseMouse
Cooler Master RS-650 NZXT Tempest Logitech G5 
  hide details  
Reply
post #17016 of 21187
Quote:
Originally Posted by abosnowman View Post

EDIT: Just got bluescreen and computer rebooted. Here's the info windows gave me, if it helps.
Code:
CPU = Q6600 (B3) Vid 1.2875
Motherboard = ud3p
BIOS Version = FE
Ram = 800

MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster .............: Auto
CPU Clock Ratio .....................: x9
Fine CPU Clock Ratio.................:
CPU Frequency .......................: 400


Clock Chip Control
Standard Clock Control
CPU Host Clock Control...............:
CPU Host Frequency (Mhz) ............: 400
PCI Express Frequency (Mhz) .........: 100


DRAM Performance Control
Performance Enhance..................:
Extreme Memory Profile (X.M.P.)......: standard
(G)MCH Frequency Latch...............: 400
System Memory Multiplier ............: 2.00D
Memory Frequency (Mhz) ..............: 800
DRAM Timing Selectable ..............: Manual

Standard Timing Control
CAS Latency Time.....................: 5
tRCD ................................: 5
tRP..................................: 5
tRAS.................................: 18


Advanced Timing Control
tRRD.................................:
tWTR.................................:
tWR..................................:
tRFC.................................:
tRTP.................................:
Command Rate (CMD) ..................:


Channel A
Static tRead Value...................:
Channel B
Static tRead Value...................:

Advance clock control
CPU clock drive......................: 800mV
PCI-E clock drive....................: 900mV
CPU clock skew.......................: 50ps
MCH clock skew.......................: 100ps


Motherboard Voltage Control
CPU
Load Line Calibration (LLC) .........: Enabled
CPU Vcore............................: 1.4875
CPU Termination.....1.200V*..........: 1.40
CPU PLL.............1.500V*..........: 1.57
CPU Referen.........0.755V*..........: Auto

MCH/ICH
MCH Core............1.100V...........: 1.42
MCH Reference.......0.800V...........: Auto
MCH/DRAM Ref........0.900V...........: auto
ICH I/O.............1.500V...........: 1.50
ICH Core............1.100V...........: 1.20

DRAM
DRAM Voltage .........1.800V.........: 1.96
DRAM Termination .....0.900V.........: Auto
Channel A Reference ..0.900V.........: auto
Channel B Reference ..0.900V.........: auto
Give that a shot, you can tighten your Ram timings accordingly, just make sure they are at the rated timings for your ram...
The Money Pit
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7-950 - 4.24 @ 1.40v Batch #3941B089 EVGA X58 SLI LE MSI 580 GTX Lightning - 950/1900/2200 @ 1.1v 6GB Mushkin @ 1475 - 6-8-6-24 
Hard DriveHard DriveOptical DriveCooling
120GB Vertex Plus 2 x 500GB WD Blues RAID0 Lite-On DVD/CD Custom H20 Loop 
OSMonitorPowerCase
Win 7 Ulti-64 25" I-Inc iH253 Antec TruePower New TP-750 CoolerMaster HAF 932 
  hide details  
Reply
The Money Pit
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7-950 - 4.24 @ 1.40v Batch #3941B089 EVGA X58 SLI LE MSI 580 GTX Lightning - 950/1900/2200 @ 1.1v 6GB Mushkin @ 1475 - 6-8-6-24 
Hard DriveHard DriveOptical DriveCooling
120GB Vertex Plus 2 x 500GB WD Blues RAID0 Lite-On DVD/CD Custom H20 Loop 
OSMonitorPowerCase
Win 7 Ulti-64 25" I-Inc iH253 Antec TruePower New TP-750 CoolerMaster HAF 932 
  hide details  
Reply
post #17017 of 21187
abosnowman, I just noticed that you list that you have a Rev 1.0 UD3P, but the FE bios you list is only for the Rev 1.6 boards. Are you sure you have the correct bios for your board?
442
(15 items)
 
Q6600
(14 items)
 
Piece O' Crappola
(13 items)
 
CPUMotherboardGraphicsRAM
Q9550 E0 DFI LanParty LT P35-T2R 2 x HD4670QT512P CF Patriot PVS24G8500ELKN 
CoolingOSMonitorPower
Stock pfsense Acer H233H Antec EarthWatts 430 
CaseAudio
custom onboard 
CPUMotherboardGraphicsRAM
Q6600 B3 Lapped @ 3.4 GA-EP45-UD3R EVGA 9600GSO 384m 96SP 4G (2x2) Patriot Viper PC2-8500 
Hard DriveOptical DriveCoolingOS
80g Maxtor, 320WDC. 320Seagate NEC ND-3550 & LiteOn CM Hyper 212+ w/PP Blademasters XP Pro SP3 
MonitorPowerCase
Acer H233H Rosewill RG630-S12 NZXT BetaEVO 
CPUMotherboardGraphicsRAM
E6420 GA-P35-DS3L GeForce 7300LE 2G PNY PC2-6400 
Hard DriveOptical DriveOSMonitor
80Gig WDC SATA NEC ND3540A Win 7 Ultimate 64bit/XP Pro Acer H233H 
PowerCase
Antec Earthwatts 430 none 
  hide details  
Reply
442
(15 items)
 
Q6600
(14 items)
 
Piece O' Crappola
(13 items)
 
CPUMotherboardGraphicsRAM
Q9550 E0 DFI LanParty LT P35-T2R 2 x HD4670QT512P CF Patriot PVS24G8500ELKN 
CoolingOSMonitorPower
Stock pfsense Acer H233H Antec EarthWatts 430 
CaseAudio
custom onboard 
CPUMotherboardGraphicsRAM
Q6600 B3 Lapped @ 3.4 GA-EP45-UD3R EVGA 9600GSO 384m 96SP 4G (2x2) Patriot Viper PC2-8500 
Hard DriveOptical DriveCoolingOS
80g Maxtor, 320WDC. 320Seagate NEC ND-3550 & LiteOn CM Hyper 212+ w/PP Blademasters XP Pro SP3 
MonitorPowerCase
Acer H233H Rosewill RG630-S12 NZXT BetaEVO 
CPUMotherboardGraphicsRAM
E6420 GA-P35-DS3L GeForce 7300LE 2G PNY PC2-6400 
Hard DriveOptical DriveOSMonitor
80Gig WDC SATA NEC ND3540A Win 7 Ultimate 64bit/XP Pro Acer H233H 
PowerCase
Antec Earthwatts 430 none 
  hide details  
Reply
post #17018 of 21187
Quote:
Originally Posted by PapaSmurf View Post
abosnowman, I just noticed that you list that you have a Rev 1.0 UD3P, but the FE bios you list is only for the Rev 1.6 boards. Are you sure you have the correct bios for your board?
I copied the MIT text from somewhere on here and I might have forgotten to change that. I am using the BIOS that came with the board when I got it in december 08. Sorry for the confusion
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 G0 Gigabyte GA-EP45-UD3P HD 4870 1gb Mushkin DDR2 6400 
Hard DriveOSMonitorKeyboard
Western Digital Caviar Black Vista 64bit Sceptre 24" LCD Razer Lycosa 
PowerCaseMouse
Cooler Master RS-650 NZXT Tempest Logitech G5 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 G0 Gigabyte GA-EP45-UD3P HD 4870 1gb Mushkin DDR2 6400 
Hard DriveOSMonitorKeyboard
Western Digital Caviar Black Vista 64bit Sceptre 24" LCD Razer Lycosa 
PowerCaseMouse
Cooler Master RS-650 NZXT Tempest Logitech G5 
  hide details  
Reply
post #17019 of 21187
It would be a good idea to let us know specifically which board revision you have as well as what bios it is. That could make a difference as a bios update might help.
442
(15 items)
 
Q6600
(14 items)
 
Piece O' Crappola
(13 items)
 
CPUMotherboardGraphicsRAM
Q9550 E0 DFI LanParty LT P35-T2R 2 x HD4670QT512P CF Patriot PVS24G8500ELKN 
CoolingOSMonitorPower
Stock pfsense Acer H233H Antec EarthWatts 430 
CaseAudio
custom onboard 
CPUMotherboardGraphicsRAM
Q6600 B3 Lapped @ 3.4 GA-EP45-UD3R EVGA 9600GSO 384m 96SP 4G (2x2) Patriot Viper PC2-8500 
Hard DriveOptical DriveCoolingOS
80g Maxtor, 320WDC. 320Seagate NEC ND-3550 & LiteOn CM Hyper 212+ w/PP Blademasters XP Pro SP3 
MonitorPowerCase
Acer H233H Rosewill RG630-S12 NZXT BetaEVO 
CPUMotherboardGraphicsRAM
E6420 GA-P35-DS3L GeForce 7300LE 2G PNY PC2-6400 
Hard DriveOptical DriveOSMonitor
80Gig WDC SATA NEC ND3540A Win 7 Ultimate 64bit/XP Pro Acer H233H 
PowerCase
Antec Earthwatts 430 none 
  hide details  
Reply
442
(15 items)
 
Q6600
(14 items)
 
Piece O' Crappola
(13 items)
 
CPUMotherboardGraphicsRAM
Q9550 E0 DFI LanParty LT P35-T2R 2 x HD4670QT512P CF Patriot PVS24G8500ELKN 
CoolingOSMonitorPower
Stock pfsense Acer H233H Antec EarthWatts 430 
CaseAudio
custom onboard 
CPUMotherboardGraphicsRAM
Q6600 B3 Lapped @ 3.4 GA-EP45-UD3R EVGA 9600GSO 384m 96SP 4G (2x2) Patriot Viper PC2-8500 
Hard DriveOptical DriveCoolingOS
80g Maxtor, 320WDC. 320Seagate NEC ND-3550 & LiteOn CM Hyper 212+ w/PP Blademasters XP Pro SP3 
MonitorPowerCase
Acer H233H Rosewill RG630-S12 NZXT BetaEVO 
CPUMotherboardGraphicsRAM
E6420 GA-P35-DS3L GeForce 7300LE 2G PNY PC2-6400 
Hard DriveOptical DriveOSMonitor
80Gig WDC SATA NEC ND3540A Win 7 Ultimate 64bit/XP Pro Acer H233H 
PowerCase
Antec Earthwatts 430 none 
  hide details  
Reply
post #17020 of 21187
The board is revision 1.0. BIOS version F6, according to CPU-Z
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 G0 Gigabyte GA-EP45-UD3P HD 4870 1gb Mushkin DDR2 6400 
Hard DriveOSMonitorKeyboard
Western Digital Caviar Black Vista 64bit Sceptre 24" LCD Razer Lycosa 
PowerCaseMouse
Cooler Master RS-650 NZXT Tempest Logitech G5 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 G0 Gigabyte GA-EP45-UD3P HD 4870 1gb Mushkin DDR2 6400 
Hard DriveOSMonitorKeyboard
Western Digital Caviar Black Vista 64bit Sceptre 24" LCD Razer Lycosa 
PowerCaseMouse
Cooler Master RS-650 NZXT Tempest Logitech G5 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › Gigabyte EP45-UD3 Series Owners Guide