Originally Posted by vaatem12
so noone has any ideas or solutions on why i cant run 465fsb+ stable? even if the multi is at 6.0 which is stock at 2.8ghz, basically right now my fsb according to p95 isnt stable past 465 even when multi is only at 6.0... could it BE my 550w bad branded logisys psu? theres got to be a reason why my specific setup cant stabilize from 465fsb and up.. i can run 3.9ghz stable..464fsb is stable, but 465 and up is not even if itso nly at 2.8ghz w/ 6.0multiplier, theres got to be a reason why. all my friends with ep45 ud3p / q9550 can stabilize up to like 480 fsb and higher. which is like 4.1ghz ++ but they have alot better psu's is the only thing i can think of...Ideas anyone? I got to figure this out before i flipppp out! arghh mateyy!
try 7x and other multis you never know what might work. sometimes a jump in speed is just the ticket ,other times the reverse will work. And sadly sometimes nothing will work
edit: sometimes too much voltage will be hurtful. Maybe drop the term to 1.28? It is up to you to find the right combination. I am quite certain that the board will do 500FSB with the "right" voltageEdited by dennyb - 7/16/09 at 2:37pm