Overclock.net › Forums › Intel › Intel Motherboards › Gigabyte EP45-UD3 Series Owners Guide
New Posts  All Forums:Forum Nav:

Gigabyte EP45-UD3 Series Owners Guide - Page 544

post #5431 of 21187
me, dennyb and grish attacked the british thread. They were full on bullying me on the brit thread due to my illness and they even dis my mom. They just bully me whenever they see me. I have not done anything wrong to offend them at all.
Edited by BradleyW - 8/8/09 at 6:24pm
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
post #5432 of 21187
And it's over now... let it be.
Pro Tem
(15 items)
 
  
CPUMotherboardGraphicsGraphics
i5 25oo MSI P67A-GD65 B3 MSi GTX56oTX-Ti Asus Direct CUii GTX56o Ti 
RAMHard DriveOptical DriveCooling
CORSAIR XMS3 8GB C3oo 128GB / 2x5ooGB WDGreen / 1.5TB SG LG DvD Burner Hyper 212+ 
OSMonitorPowerCase
Win7 HP 64 AcerH233H / Acer X2o3H Antec 75oW Raidmax Smilodon Extreme fan mod 
  hide details  
Reply
Pro Tem
(15 items)
 
  
CPUMotherboardGraphicsGraphics
i5 25oo MSI P67A-GD65 B3 MSi GTX56oTX-Ti Asus Direct CUii GTX56o Ti 
RAMHard DriveOptical DriveCooling
CORSAIR XMS3 8GB C3oo 128GB / 2x5ooGB WDGreen / 1.5TB SG LG DvD Burner Hyper 212+ 
OSMonitorPowerCase
Win7 HP 64 AcerH233H / Acer X2o3H Antec 75oW Raidmax Smilodon Extreme fan mod 
  hide details  
Reply
post #5433 of 21187
anybody wanna talk about computers?

5.5 hrs stable on sm fft. It is looking more and more like I have found the FSB limit on this board. Not real pleased, but it could be a lot worse I suppose.
Edited by dennyb - 8/8/09 at 7:54pm
GIGABYTE GOODNESS
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K @ 4.3GHz Asus P8Z68-V Pro EVGA GTX 550 Ti G.Skill 12Gb DDR3 1600 
Hard DriveOptical DriveCoolingOS
Crucial 64 plus 6 TB HD Lite On Dark Knight 7 Pro 64 bit 
MonitorKeyboardPowerCase
Samsung2433BW Logitech Antec TP 650 Corsair 600T SE 
Mouse
Logitech 
  hide details  
Reply
GIGABYTE GOODNESS
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K @ 4.3GHz Asus P8Z68-V Pro EVGA GTX 550 Ti G.Skill 12Gb DDR3 1600 
Hard DriveOptical DriveCoolingOS
Crucial 64 plus 6 TB HD Lite On Dark Knight 7 Pro 64 bit 
MonitorKeyboardPowerCase
Samsung2433BW Logitech Antec TP 650 Corsair 600T SE 
Mouse
Logitech 
  hide details  
Reply
post #5434 of 21187
the thread is closed for a while. that will pee them off. I canno thank you enought guys
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
post #5435 of 21187
Quote:
Originally Posted by dennyb View Post
anybody wanna talk about computers?

5.5 hrs stable on sm fft. It is looking more and more like I have found the FSB limit on this board. Not real pleased, but it could be a lot worse I suppose.
Nice denny... my fingers are crossed for you.
Pro Tem
(15 items)
 
  
CPUMotherboardGraphicsGraphics
i5 25oo MSI P67A-GD65 B3 MSi GTX56oTX-Ti Asus Direct CUii GTX56o Ti 
RAMHard DriveOptical DriveCooling
CORSAIR XMS3 8GB C3oo 128GB / 2x5ooGB WDGreen / 1.5TB SG LG DvD Burner Hyper 212+ 
OSMonitorPowerCase
Win7 HP 64 AcerH233H / Acer X2o3H Antec 75oW Raidmax Smilodon Extreme fan mod 
  hide details  
Reply
Pro Tem
(15 items)
 
  
CPUMotherboardGraphicsGraphics
i5 25oo MSI P67A-GD65 B3 MSi GTX56oTX-Ti Asus Direct CUii GTX56o Ti 
RAMHard DriveOptical DriveCooling
CORSAIR XMS3 8GB C3oo 128GB / 2x5ooGB WDGreen / 1.5TB SG LG DvD Burner Hyper 212+ 
OSMonitorPowerCase
Win7 HP 64 AcerH233H / Acer X2o3H Antec 75oW Raidmax Smilodon Extreme fan mod 
  hide details  
Reply
post #5436 of 21187
Quote:
Originally Posted by dennyb View Post
Not a bad set of #'s pdawg, especially for no LLC-Props to ya. Now that you have a stable 4.0 you can play around in the BIOS to see if you can improve on it voltage-wise. Here is something I got from supaspoon that helped me. We are going to use the refs in order to hopefully lower your voltages

In BIOS
set V-core to 1.375
set CPU TERM to 1.20
set CPU Ref to .83
set MCH ref to .80
set MCH Core to 1.30
now go back to CPU Term and set it at 1.34 ( the refs must be set with Term at 1.20. They scale up when you reset the term to the required value)

Try these settings and if you need to adjust V-core,Term and MCH core, then do so as needed
Been busy guys...I just went to try what you recommended denny but I noticed after setting Term to 1.20 and went to change CPU Ref to .83 that my board doesn't give that option...the highest it'll give me is .805 - yet another small example of UD3P/R superiority...strange that it isn't an option though...my board is only on bios f5 though as it doesn't get nearly as much attention...

Could another Ref combo work or should I just go after enabling LLC at this point?
Main rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9550 E0 @ 4.0GHz (1.35v/vid 1.25v) Gigabyte EP45-UD3LR GTX260 216 Corsair Twin2x2048-8500C5C (2x2GB) 
Hard DrivePower
Seagate SATAII 1TB Corsair 520W 
  hide details  
Reply
Main rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q9550 E0 @ 4.0GHz (1.35v/vid 1.25v) Gigabyte EP45-UD3LR GTX260 216 Corsair Twin2x2048-8500C5C (2x2GB) 
Hard DrivePower
Seagate SATAII 1TB Corsair 520W 
  hide details  
Reply
post #5437 of 21187
Quote:
Originally Posted by pdawg17 View Post
Been busy guys...I just went to try what you recommended denny but I noticed after setting Term to 1.20 and went to change CPU Ref to .83 that my board doesn't give that option...the highest it'll give me is .805 - yet another small example of UD3P/R superiority...strange that it isn't an option though...my board is only on bios f5 though as it doesn't get nearly as much attention...

Could another Ref combo work or should I just go after enabling LLC at this point?
Ya, that is strange. I would just pick a ref value that is higher than the stock value. It is pretty much a hit or miss deal with the refs anyway. They are working well for me on this E6300, but on the 9650 they held up thru 4.1GHz and then I had to abandon them. Go figure. Most likely a case of me not selecting them properly. I am not very skilled in the use of refs or the PLL. I just copy what some of the better overclockers are doing with them and hope they help me.

as far as LLC- if you are doing well without it then continue on. I am not enabling LLC on this chip(E6300) but I use it on the 9650
Edited by dennyb - 8/8/09 at 9:19pm
GIGABYTE GOODNESS
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K @ 4.3GHz Asus P8Z68-V Pro EVGA GTX 550 Ti G.Skill 12Gb DDR3 1600 
Hard DriveOptical DriveCoolingOS
Crucial 64 plus 6 TB HD Lite On Dark Knight 7 Pro 64 bit 
MonitorKeyboardPowerCase
Samsung2433BW Logitech Antec TP 650 Corsair 600T SE 
Mouse
Logitech 
  hide details  
Reply
GIGABYTE GOODNESS
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K @ 4.3GHz Asus P8Z68-V Pro EVGA GTX 550 Ti G.Skill 12Gb DDR3 1600 
Hard DriveOptical DriveCoolingOS
Crucial 64 plus 6 TB HD Lite On Dark Knight 7 Pro 64 bit 
MonitorKeyboardPowerCase
Samsung2433BW Logitech Antec TP 650 Corsair 600T SE 
Mouse
Logitech 
  hide details  
Reply
post #5438 of 21187
I have G.Skill F2-8500CL5D-4GBPK rated to 1066.

System:
EP43-UD3L w/E5200 ***not signature system***

My CPU is stable and tested. RAM is causing the issue.

I have my ram voltage at 2.1v as recommended on box. timings I've manually set to 5-5-5-15 as stated on box as well.

when I put the 200MHZ Frequency latch on, and I use the 3.33C(330x11) setting which sets my RAM to 1100, it won't POST.

Even if I use say 360x10, using 2.66C which gives me 960 RAM, it still won't post and I have to reset CMOS.

What am I doing wrong?
    
CPUMotherboardGraphicsRAM
E8400 EVGA 780i SLI 2x EVGA GTX260 216 Core Corsair Dominator DDR1066 4GB 
OSMonitorKeyboardPower
XP 32-bit Asus MK241 24" 1920x1200 Crap Athena Power 850w 
CaseMouse
Ahtena Power - Rack Mount Logitech MX 518 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
E8400 EVGA 780i SLI 2x EVGA GTX260 216 Core Corsair Dominator DDR1066 4GB 
OSMonitorKeyboardPower
XP 32-bit Asus MK241 24" 1920x1200 Crap Athena Power 850w 
CaseMouse
Ahtena Power - Rack Mount Logitech MX 518 
  hide details  
Reply
post #5439 of 21187
Ok before i make a thread ill come here. Im wondering how fast my mobo or CPU would degrade?

I recently re did my WC loop, when i rebooted the system it was fine, with better temps i pushed farther 1.45 vcore in BIOS idle at 1.39 in windows @ 4.25 GHz, well that failed so i just went back to my 4.1 GHz OC thats unstable now to, and now it wont boot any FSB above 415 ish.

I reset the CMOS and checked for water leaks..nothing so im wondering how it went unstable randomly and now wont boot that high
    
CPUMotherboardGraphicsRAM
Intel Core i7 930 [4.33 Ghz] EVGA X58 SLI LE EVGA GTS 450 [SLI] 6 GB DDR 3 OCZ 1600 [1T-7-8-7-18 @ 1474] 
Hard DriveOptical DriveOSMonitor
Vertex 2 [120 GB] + 4x WD Green 2 TB [Raid1] Samsung BD-R [12x] Microsoft Windows 7 Pro [x64] [3] Samsung SyncMaster 2233sw 
KeyboardPowerCaseMouse
I-rocks Corsair HX650 [650W] Lian Li PC K62 Logi 
Mouse Pad
Metallica 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Core i7 930 [4.33 Ghz] EVGA X58 SLI LE EVGA GTS 450 [SLI] 6 GB DDR 3 OCZ 1600 [1T-7-8-7-18 @ 1474] 
Hard DriveOptical DriveOSMonitor
Vertex 2 [120 GB] + 4x WD Green 2 TB [Raid1] Samsung BD-R [12x] Microsoft Windows 7 Pro [x64] [3] Samsung SyncMaster 2233sw 
KeyboardPowerCaseMouse
I-rocks Corsair HX650 [650W] Lian Li PC K62 Logi 
Mouse Pad
Metallica 
  hide details  
Reply
post #5440 of 21187
Quote:
Originally Posted by Treble View Post
I have G.Skill F2-8500CL5D-4GBPK rated to 1066.

System:
EP43-UD3L w/E5200 ***not signature system***

My CPU is stable and tested. RAM is causing the issue.

I have my ram voltage at 2.1v as recommended on box. timings I've manually set to 5-5-5-15 as stated on box as well.

when I put the 200MHZ Frequency latch on, and I use the 3.33C(330x11) setting which sets my RAM to 1100, it won't POST.

Even if I use say 360x10, using 2.66C which gives me 960 RAM, it still won't post and I have to reset CMOS.

What am I doing wrong?
I would try the b or d latch instead of the c latch and pick a multi that gets you close to the manu specs for your ram speed. Maybe under the speed if necessary
GIGABYTE GOODNESS
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K @ 4.3GHz Asus P8Z68-V Pro EVGA GTX 550 Ti G.Skill 12Gb DDR3 1600 
Hard DriveOptical DriveCoolingOS
Crucial 64 plus 6 TB HD Lite On Dark Knight 7 Pro 64 bit 
MonitorKeyboardPowerCase
Samsung2433BW Logitech Antec TP 650 Corsair 600T SE 
Mouse
Logitech 
  hide details  
Reply
GIGABYTE GOODNESS
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K @ 4.3GHz Asus P8Z68-V Pro EVGA GTX 550 Ti G.Skill 12Gb DDR3 1600 
Hard DriveOptical DriveCoolingOS
Crucial 64 plus 6 TB HD Lite On Dark Knight 7 Pro 64 bit 
MonitorKeyboardPowerCase
Samsung2433BW Logitech Antec TP 650 Corsair 600T SE 
Mouse
Logitech 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › Gigabyte EP45-UD3 Series Owners Guide