Originally Posted by 18 is # 1
Started messing with ET6 and when the machine rebooted, it went to the GB splash screen and just stays there. Have tried clearing the CMOS (with and without the battery) and have pulled the batt and unplugged for an hour. Still splash screen only. Have tried delete, F buttons, and tab to no avail.
With and without battery,hmm, Iguess that means you have shorted the CMOS clear pins,but just in case--Try clearing the CMOS in this manner
Shut down--unplug-- hold start button in for 10 sec--short the CMOS pins in lower right corner of mobo for 1 minute using a flat screwdriver--plug back in-start--load Optimum Defaults--Set PCIe to 100--Set ram timings-- setDRAM voltage--go to Integrated Peripherals-enable all USB settings(they are at the bottom of the page)--go to Advanced BIOS Features,init display-select PEG
Also the boot order will need attentionEdited by dennyb - 8/12/09 at 5:40am