Originally Posted by lemans81
Well I turn llc off and yeah the MCH is fine it acts the same with 1.34v(it doesn't seem to like 1.3v though).
I have run the volts up to 1.468v(in windows under load its at 1.39v) and still can't get it stable. Its sad that my blood iron could push this chip further....I have to be missing something.
If I remember correctly at 1.3vmch there was a bad spot or the board didnt like it. I think most ran it above that just a tad (if I remember right).
The E8400 should oc very easily with this board. It may be something else. Maybe ram voltage needs a little bumb.
I personally when I had my E8400 left llc enabled. I ran about 1.35vcore and didnt have any issues running it like that for a good 6 months before it got put in another system where its still running flawlessly today.
But to each there own.
EDIT: Oh and I dont remember but I think the percentages need adjustment for that cpu. Needs to be about 64% I think on the cpu settings, theres two of them forgot what they are called lol. Its what like 68% for 65nm guys and 64 or 63 for the 45nm.