Overclock.net › Forums › Intel › Intel Motherboards › Gigabyte EP45-UD3 Series Owners Guide
New Posts  All Forums:Forum Nav:

Gigabyte EP45-UD3 Series Owners Guide - Page 633

post #6321 of 21186
Quote:
Originally Posted by B7ADE View Post

Any ideas on how to resolve this?
Did you check Round off Checking, under Advanced Tab? Dude, your tRFC is WAY HIGH. For 4GB or less RAM you shouldn't need to go above 60.

Quote:
Originally Posted by ACHILEE5 View Post
Without acting like a child i tried not to expose your talking rubbish but have it your own way!

So, you have seen buildings with better air flow than my case
Mate, people would be blown through the building
Yes I'm am talking Scale, but you have too!
Get real
Not better, per say. Like I said, Air flows in - Air flows out. But in a building, engineers can make it so that when the doors open on the ground floor, Air only flows out through them. That is true pressurization. And people wouldn't be blown through the buildings. Once inside, you aren't subject to any flow, other than what is passing through the vents and returns. However, everyone has had the experience of opening the ground floor door of a large building and feeling the air rush out, sometimes helping push the door open, sometimes just a noise, but it is there nonetheless.

All I am saying is that I don't know how it would be possible to prevent dust from entering a case via air pressure. Air must flow into the case and with it dust, except for the use of filters, right? And filters would inhibit flow proportionately to how well they inhibit dust.

OOOOH, I know, if your Flow is significantly high, dust wouldn't have time to settle on the way out. I don't use filters, I have a high Flow Rate through my case, therefore I don't notice large dust buildups inside my case. Once every few weeks I open it up and clean it out with canned air, but it never amounts to much. Is that what you mean by having a High Positive Pressure?

Wasn't trying to start a fight, AC.
Pro Tem
(15 items)
 
  
CPUMotherboardGraphicsGraphics
i5 25oo MSI P67A-GD65 B3 MSi GTX56oTX-Ti Asus Direct CUii GTX56o Ti 
RAMHard DriveOptical DriveCooling
CORSAIR XMS3 8GB C3oo 128GB / 2x5ooGB WDGreen / 1.5TB SG LG DvD Burner Hyper 212+ 
OSMonitorPowerCase
Win7 HP 64 AcerH233H / Acer X2o3H Antec 75oW Raidmax Smilodon Extreme fan mod 
  hide details  
Reply
Pro Tem
(15 items)
 
  
CPUMotherboardGraphicsGraphics
i5 25oo MSI P67A-GD65 B3 MSi GTX56oTX-Ti Asus Direct CUii GTX56o Ti 
RAMHard DriveOptical DriveCooling
CORSAIR XMS3 8GB C3oo 128GB / 2x5ooGB WDGreen / 1.5TB SG LG DvD Burner Hyper 212+ 
OSMonitorPowerCase
Win7 HP 64 AcerH233H / Acer X2o3H Antec 75oW Raidmax Smilodon Extreme fan mod 
  hide details  
Reply
post #6322 of 21186
hmm, setting the MCH to 1.46V seems to add a crapload(i mean crapload) of stability. Lets see if i can get someplace with this.
FermIntel Inside
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600k 5Ghz 24/7 ASUS Maximus IV Extreme Gen 3 GTX 470 SLI + HD5450 16GB G.Skill Ripjaws 
Hard DriveOptical DriveOSMonitor
lots none Win7 Ultimate (b:7600) LG W2353V + LG W2343T + LG W2254TQ 
KeyboardPowerCaseMouse
Apple Aluminum Seasonic SS 850HT Sunbean ACTS Razer Deathadder 3500dpi 
  hide details  
Reply
FermIntel Inside
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600k 5Ghz 24/7 ASUS Maximus IV Extreme Gen 3 GTX 470 SLI + HD5450 16GB G.Skill Ripjaws 
Hard DriveOptical DriveOSMonitor
lots none Win7 Ultimate (b:7600) LG W2353V + LG W2343T + LG W2254TQ 
KeyboardPowerCaseMouse
Apple Aluminum Seasonic SS 850HT Sunbean ACTS Razer Deathadder 3500dpi 
  hide details  
Reply
post #6323 of 21186
Quote:
Originally Posted by B7ADE View Post
hmm, setting the MCH to 1.46V seems to add a crapload(i mean crapload) of stability. Lets see if i can get someplace with this.
I think you are on the wrong track now. That much MCH is ok for benching but I think too much otherwise. Some of your other settings are off. Drop MCH back down to 1.32 max for your speed and set all other voltage settings other than V-core -term and MCH to "normal. You might have to load Op defaults to get the board back to the best settings

load Optimum Defaults--Set PCIe to 100--Set ram timings-- set DRAM voltage--go to Integrated Peripherals-enable all USB settings(they are at the bottom of the page)--go to Advanced BIOS Features,init display-select PEG
also the boot order will need attention
GIGABYTE GOODNESS
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K @ 4.3GHz Asus P8Z68-V Pro EVGA GTX 550 Ti G.Skill 12Gb DDR3 1600 
Hard DriveOptical DriveCoolingOS
Crucial 64 plus 6 TB HD Lite On Dark Knight 7 Pro 64 bit 
MonitorKeyboardPowerCase
Samsung2433BW Logitech Antec TP 650 Corsair 600T SE 
Mouse
Logitech 
  hide details  
Reply
GIGABYTE GOODNESS
(14 items)
 
  
CPUMotherboardGraphicsRAM
i5 2500K @ 4.3GHz Asus P8Z68-V Pro EVGA GTX 550 Ti G.Skill 12Gb DDR3 1600 
Hard DriveOptical DriveCoolingOS
Crucial 64 plus 6 TB HD Lite On Dark Knight 7 Pro 64 bit 
MonitorKeyboardPowerCase
Samsung2433BW Logitech Antec TP 650 Corsair 600T SE 
Mouse
Logitech 
  hide details  
Reply
post #6324 of 21186
Actually, if you have high airflow, dust can still clog a system. It may not settle on the motherboard, per se, but I ran without my filters for a little while. That was a huge mistake, as my heatsink and GPU fans got inundated with dust, to the point where my heatsink wasn't able to function properly. That was right behind a fan, so yes, dust can still get caught right behind a fan. As far as pressures go, you can have a positive/negative pressure in a case, but you may or may not be able to feel the difference. What you feel, though, is not entirely relevant, as dust can get everywhere.
Mk. IV
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 3930k Asus Rampage IV Extreme 2x Sapphire 7950 DualX 8GB (4x2GB) Corsair XMS3 DDR3-2000 
Hard DriveOptical DriveCoolingOS
2x Samsung F3 1TB RAID0, 2x Seagate 7200.11 500GB LG Black 22x Corsair H100 Windows 7 Professional 
MonitorKeyboardPowerCase
Samsung 46in TV Logitech G19 Corsair AX1200 Corsair 800D 
Mouse PadAudio
Borderlands pad, signed by production team Onkyo 5.1ch surround 
  hide details  
Reply
Mk. IV
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 3930k Asus Rampage IV Extreme 2x Sapphire 7950 DualX 8GB (4x2GB) Corsair XMS3 DDR3-2000 
Hard DriveOptical DriveCoolingOS
2x Samsung F3 1TB RAID0, 2x Seagate 7200.11 500GB LG Black 22x Corsair H100 Windows 7 Professional 
MonitorKeyboardPowerCase
Samsung 46in TV Logitech G19 Corsair AX1200 Corsair 800D 
Mouse PadAudio
Borderlands pad, signed by production team Onkyo 5.1ch surround 
  hide details  
Reply
post #6325 of 21186
Quote:
Originally Posted by SgtHop View Post
Actually, if you have high airflow, dust can still clog a system. It may not settle on the motherboard, per se, but I ran without my filters for a little while. That was a huge mistake, as my heatsink and GPU fans got inundated with dust, to the point where my heatsink wasn't able to function properly. That was right behind a fan, so yes, dust can still get caught right behind a fan. As far as pressures go, you can have a positive/negative pressure in a case, but you may or may not be able to feel the difference. What you feel, though, is not entirely relevant, as dust can get everywhere.
I can dig that. It would make sense for a lot of reasons why dust might resist the inertia flow and settle on energized components.
Pro Tem
(15 items)
 
  
CPUMotherboardGraphicsGraphics
i5 25oo MSI P67A-GD65 B3 MSi GTX56oTX-Ti Asus Direct CUii GTX56o Ti 
RAMHard DriveOptical DriveCooling
CORSAIR XMS3 8GB C3oo 128GB / 2x5ooGB WDGreen / 1.5TB SG LG DvD Burner Hyper 212+ 
OSMonitorPowerCase
Win7 HP 64 AcerH233H / Acer X2o3H Antec 75oW Raidmax Smilodon Extreme fan mod 
  hide details  
Reply
Pro Tem
(15 items)
 
  
CPUMotherboardGraphicsGraphics
i5 25oo MSI P67A-GD65 B3 MSi GTX56oTX-Ti Asus Direct CUii GTX56o Ti 
RAMHard DriveOptical DriveCooling
CORSAIR XMS3 8GB C3oo 128GB / 2x5ooGB WDGreen / 1.5TB SG LG DvD Burner Hyper 212+ 
OSMonitorPowerCase
Win7 HP 64 AcerH233H / Acer X2o3H Antec 75oW Raidmax Smilodon Extreme fan mod 
  hide details  
Reply
post #6326 of 21186
The previous poster mentioned scale, and that is completely correct. You're not wrong, you're just thinking about it in a different way.
Mk. IV
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 3930k Asus Rampage IV Extreme 2x Sapphire 7950 DualX 8GB (4x2GB) Corsair XMS3 DDR3-2000 
Hard DriveOptical DriveCoolingOS
2x Samsung F3 1TB RAID0, 2x Seagate 7200.11 500GB LG Black 22x Corsair H100 Windows 7 Professional 
MonitorKeyboardPowerCase
Samsung 46in TV Logitech G19 Corsair AX1200 Corsair 800D 
Mouse PadAudio
Borderlands pad, signed by production team Onkyo 5.1ch surround 
  hide details  
Reply
Mk. IV
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 3930k Asus Rampage IV Extreme 2x Sapphire 7950 DualX 8GB (4x2GB) Corsair XMS3 DDR3-2000 
Hard DriveOptical DriveCoolingOS
2x Samsung F3 1TB RAID0, 2x Seagate 7200.11 500GB LG Black 22x Corsair H100 Windows 7 Professional 
MonitorKeyboardPowerCase
Samsung 46in TV Logitech G19 Corsair AX1200 Corsair 800D 
Mouse PadAudio
Borderlands pad, signed by production team Onkyo 5.1ch surround 
  hide details  
Reply
post #6327 of 21186
When you re-apply thermal paste in the NB and SB, are you guys re-using the thermal pads of the MOSFETS? No problem with that?
post #6328 of 21186
Quote:
Originally Posted by grishkathefool View Post
Wasn't trying to start a fight, AC.
No worries dude.
It was just the silly picture!
But we're good
I Like Smileys :)
(16 items)
 
Sony Vaio 1512
(9 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7-2600K 4.6GHz Asus P8P67 Pro Bios 3207 MSI GTX 970 GAMING 4G Ripjaws-X 16GB 1600MHz 
Hard DriveHard DriveOptical DriveCooling
80GB Intel & 128GB 830  2 x WD640 Caviar Black LG DVD-RW Noctua NH-D14  
OSMonitorKeyboardPower
Windows 7 HP 64bit Acer 5906x1080 3D Logitech G15 Corsair TX850W 
CaseMouseMouse PadAudio
Antec Dark Fleet DF-85 Logitec G700 Razer Goliathus Sharkoon X-Tatic 5.1 Headset 
CPUMotherboardGraphicsRAM
Intel® Core™ i5-3210M Laptop  HD 4000 Corsair Vengeance 8GB  
Hard DriveOptical DriveOSMonitor
Samsung 840 250GB DVD Multi Windows 8 15.5 inch display (1366 x 768) 
Keyboard
LED Back lit 
  hide details  
Reply
I Like Smileys :)
(16 items)
 
Sony Vaio 1512
(9 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7-2600K 4.6GHz Asus P8P67 Pro Bios 3207 MSI GTX 970 GAMING 4G Ripjaws-X 16GB 1600MHz 
Hard DriveHard DriveOptical DriveCooling
80GB Intel & 128GB 830  2 x WD640 Caviar Black LG DVD-RW Noctua NH-D14  
OSMonitorKeyboardPower
Windows 7 HP 64bit Acer 5906x1080 3D Logitech G15 Corsair TX850W 
CaseMouseMouse PadAudio
Antec Dark Fleet DF-85 Logitec G700 Razer Goliathus Sharkoon X-Tatic 5.1 Headset 
CPUMotherboardGraphicsRAM
Intel® Core™ i5-3210M Laptop  HD 4000 Corsair Vengeance 8GB  
Hard DriveOptical DriveOSMonitor
Samsung 840 250GB DVD Multi Windows 8 15.5 inch display (1366 x 768) 
Keyboard
LED Back lit 
  hide details  
Reply
post #6329 of 21186
Quote:
Originally Posted by ACHILEE5 View Post
No worries dude.
It was just the silly picture!
But we're good
Nice to see members making friends and helping one another
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
post #6330 of 21186
coming back to the states tomorrow

dam 17 hrs flight again!!!
First Build PC
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 at 3.90 1.6v, 1.52 idle 1.44 load in CPUZ Gigabyte EP45-UD3P Evga gts 250 849/2049/1205 4 GB G.Skills 2x2GB 
Hard DriveOptical DriveOSMonitor
320 GB 500 External HD Vista Ultimate 64 bit 22in Samsung SyncMaster220wm 
PowerCaseMouseMouse Pad
Antec EW 500 Haf 932 5 dollars from micro center starpower from over 8yrs ago 
  hide details  
Reply
First Build PC
(13 items)
 
  
CPUMotherboardGraphicsRAM
Q6600 at 3.90 1.6v, 1.52 idle 1.44 load in CPUZ Gigabyte EP45-UD3P Evga gts 250 849/2049/1205 4 GB G.Skills 2x2GB 
Hard DriveOptical DriveOSMonitor
320 GB 500 External HD Vista Ultimate 64 bit 22in Samsung SyncMaster220wm 
PowerCaseMouseMouse Pad
Antec EW 500 Haf 932 5 dollars from micro center starpower from over 8yrs ago 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › Gigabyte EP45-UD3 Series Owners Guide