Overclock.net › Forums › Intel › Intel Motherboards › Gigabyte EP45-UD3 Series Owners Guide
New Posts  All Forums:Forum Nav:

Gigabyte EP45-UD3 Series Owners Guide - Page 703

post #7021 of 21186
Quote:
Originally Posted by Autox View Post
For those with q9950/q9650 and using a xiggy 1283, how high are your max temps?
Mine were (at 4.0Ghz) dangerously near the 70C mark. I've yet to try a re-seat, but it's also worth noting I've got two GTX260's cooking inside this oven of a case. So, my ambient temps are usually quite warm.
RAWR
(13 items)
 
Home Server
(11 items)
 
 
CPUMotherboardGraphicsRAM
i7-4790k msi z97 gaming 7 gtx 760 4gb 32GB GSkill  
Hard DriveHard DriveCoolingOS
Kingston HyperX 3K 120GB SSD Hitachi 2TB Cooler Master Hyper 212+ Windows 8.1 Pro 
MonitorKeyboardPowerCase
Vizio M492-b2 Logitech Wireless  Corsair HX620 NZXT Phantom White 
Mouse
Logitech Wireless 
  hide details  
Reply
RAWR
(13 items)
 
Home Server
(11 items)
 
 
CPUMotherboardGraphicsRAM
i7-4790k msi z97 gaming 7 gtx 760 4gb 32GB GSkill  
Hard DriveHard DriveCoolingOS
Kingston HyperX 3K 120GB SSD Hitachi 2TB Cooler Master Hyper 212+ Windows 8.1 Pro 
MonitorKeyboardPowerCase
Vizio M492-b2 Logitech Wireless  Corsair HX620 NZXT Phantom White 
Mouse
Logitech Wireless 
  hide details  
Reply
post #7022 of 21186
Quote:
Originally Posted by NoGuru View Post
You are stuck. Too bad you haven't been reading the last 10 pages. I'm sure they will fix this with the next update.
I am one of the victim of f10e bios also. I was depressed for a few days I spent probably a week or so trying to fix it. After a bunch of crashes I had clocking the quad over 500fsb, it hasn't come back since I did this.

Download Beta Bios F8A. If you have F10E loaded, You can flash it to F8A without any hassle using the END key (Qflash) during the bios post logo. After it flashes to F8A (load optimized defaults). When it boots up, before the logo appears tap ALT+F11 key. It will go into dos mode and tells you bios is the same. Now flash it again to your favorite bios and do the same method. Push high fsb where the board will (if you have f10e or any bios after) most of the time revert back to F10e. There's another method and you have to ask guidance from lsdme (mod gigabyte at tweaktown)

My beef with f10e bios is that ram bandwidth is garbage and problem reverting to some of the earlier bios.

cruisant
Tru Blu
(13 items)
 
Still Tru Blu
(16 items)
 
 
CPUMotherboardGraphicsRAM
Q9550 EP45-UD3P 1.1 Gigabyte HD4850 1gb Xfire 4x1Gb PC6400 Buffalo Value Ram 
Hard DriveOptical DriveOSMonitor
Western Digital 160Gb Samsung DVD-RW Windows 7 64bit RC7100 Samsung 20' 
PowerCaseMouseMouse Pad
Zippy 460W Antec 300 Microsoft generic old school dell mp 
CPUMotherboardGraphicsGraphics
Core I7 3820 Gigabyte X79-UP4 Gigabyte GTX670OC 2GD Gigabyte GTX670OC 2GD 
RAMHard DriveOptical DriveCooling
Gskill Ripjaws Z 2133 WD 1TB Sata LG DVD-RW XSPC D5 EX360 kit 
OSMonitorKeyboardPower
Win7 64 bit Panasonic TC-P50ST50 Microsoft wireless AX1200 
CaseMouseAudioAudio
Switch 810 Microsoft wireless Asus Xonar DSX Pci-e Pioneer 7.1 A/V Reciever + SVS Speakers + 2xPB1... 
  hide details  
Reply
Tru Blu
(13 items)
 
Still Tru Blu
(16 items)
 
 
CPUMotherboardGraphicsRAM
Q9550 EP45-UD3P 1.1 Gigabyte HD4850 1gb Xfire 4x1Gb PC6400 Buffalo Value Ram 
Hard DriveOptical DriveOSMonitor
Western Digital 160Gb Samsung DVD-RW Windows 7 64bit RC7100 Samsung 20' 
PowerCaseMouseMouse Pad
Zippy 460W Antec 300 Microsoft generic old school dell mp 
CPUMotherboardGraphicsGraphics
Core I7 3820 Gigabyte X79-UP4 Gigabyte GTX670OC 2GD Gigabyte GTX670OC 2GD 
RAMHard DriveOptical DriveCooling
Gskill Ripjaws Z 2133 WD 1TB Sata LG DVD-RW XSPC D5 EX360 kit 
OSMonitorKeyboardPower
Win7 64 bit Panasonic TC-P50ST50 Microsoft wireless AX1200 
CaseMouseAudioAudio
Switch 810 Microsoft wireless Asus Xonar DSX Pci-e Pioneer 7.1 A/V Reciever + SVS Speakers + 2xPB1... 
  hide details  
Reply
post #7023 of 21186
Quote:
Originally Posted by cruisant View Post
I am one of the victim of f10e bios also. I was depressed for a few days I spent probably a week or so trying to fix it. After a bunch of crashes I had clocking the quad over 500fsb, it hasn't come back since I did this.

Download Beta Bios F8A. If you have F10E loaded, You can flash it to F8A without any hassle using the END key (Qflash) during the bios post logo. After it flashes to F8A (load optimized defaults). When it boots up, before the logo appears tap ALT+F11 key. It will go into dos mode and tells you bios is the same. Now flash it again to your favorite bios and do the same method. Push high fsb where the board will (if you have f10e or any bios after) most of the time revert back to F10e. There's another method and you have to ask guidance from lsdme (mod gigabyte at tweaktown)

My beef with f10e bios is that ram bandwidth is garbage and problem reverting to some of the earlier bios.

cruisant
+
Am sure this will help many. I think i am using the F9 or F8 version at the moment with no significant issues at the moment. Sorry to hear your "bad" experience with the bios flashing. All the best.

BradleyW.
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
post #7024 of 21186
Thank you very the heads up, this should me figure out where my numbers be, i have a few MIT settings printed out, so I will figure this out for myself.


Quote:
Originally Posted by NoGuru View Post
This might help you.

******Motherboard Voltage Control******

Load-Line Calibration: disabled (can be used if volt drop is to big at higher core speed. (I always use LLC when overclocked)

CPU Vcore: The voltage applied to CPU @ varying speeds in order to achieve stability

CPU Termination: 1.20 aka "FSB voltage", keeps your system stable at a certain bus speed, higher bus, higher CPU Term

CPU PLL: 1.50 (it helps you to boot into OS, higher bus speed, higher CPU PLL) 1.50 is good enough up to 450 FSB with a quad

CPU Reference: 0.760 (aka CPU GTL Ref, set this value when CPU Term is at 1,20 because it changes/scales with the CPU Term, this one is a bit tough to explain but in short, this one helps to have the CPU stable when increasing bus speed)

MCH Core: 1.20 -1.30 (aka NB voltage, this P45 setting is a bit sensitive, both too low or too high and it will not boot)

MCH Reference: (0.840?) (aka NB GTL Ref, set this value when CPU Term is at 1.20 because it changes/scales with the CPU Term, this one is a bit tough to explain but in short, this one helps to have the NB stable when increasing bus speed, this one is also a bit sensitive, one step up or down should be fine though)

MCH/DRAM Reference: Auto (reference between NB and ram, best set to auto) I use normal

ICH I/O: 1.50 (aka SB bus voltage, one or two steps up if you run raid or many HD)

ICH Core: 1.10 (aka SB core voltage, one or two steps up if you run raid or many HD)

DRAM Voltage: You know what to set for your ram

DRAM Termination: auto (termination voltage for the ram) I use normal

Channel A Ref: auto (reference voltage for ram slots A) I use normal

Channel B Ref: auto (reference voltage for ram slots A) I use normal


My system
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8400 Gigabyte EP45 UD3P 8800GT 4GB OCZ Reaper 8500 
Hard DriveOptical DriveOSMonitor
1TB Seagate SATA, 2x250GB IDE Maxtor LG Sata DVD RW Vista x64 HP / Windows 7 20" Dell WFP2005 
KeyboardPowerCaseMouse
Logitech OCZ Modxstream 500watt Antec Sonata II Logitech MX1000/M518 
  hide details  
Reply
My system
(13 items)
 
  
CPUMotherboardGraphicsRAM
E8400 Gigabyte EP45 UD3P 8800GT 4GB OCZ Reaper 8500 
Hard DriveOptical DriveOSMonitor
1TB Seagate SATA, 2x250GB IDE Maxtor LG Sata DVD RW Vista x64 HP / Windows 7 20" Dell WFP2005 
KeyboardPowerCaseMouse
Logitech OCZ Modxstream 500watt Antec Sonata II Logitech MX1000/M518 
  hide details  
Reply
post #7025 of 21186
Good Luck then mate. I hope you figure it out. Any probs, refer to the thread.
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
post #7026 of 21186
Quote:
Originally Posted by Autox View Post
For those with q9950/q9650 and using a xiggy 1283, how high are your max temps?
I'm guessing you meant Q9550/Q9650 since you have the Q9550 in your signature. Is that correct?
Sage Server
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 3820 X79-UD3 ATI Mobility Radeon HD 5400 Series Samsung  
RAMRAMRAMHard Drive
Samsung  Samsung  Samsung  Intel 80GB SSD 
CoolingOSPowerCase
xspc rasa 750 rs240 Windows 7 x64 Corsair AX 850 HAF 922 
Other
4 x Hauppauge Colossus, Intel RAID RT30WB80 (4 ... 
  hide details  
Reply
Sage Server
(18 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i7 3820 X79-UD3 ATI Mobility Radeon HD 5400 Series Samsung  
RAMRAMRAMHard Drive
Samsung  Samsung  Samsung  Intel 80GB SSD 
CoolingOSPowerCase
xspc rasa 750 rs240 Windows 7 x64 Corsair AX 850 HAF 922 
Other
4 x Hauppauge Colossus, Intel RAID RT30WB80 (4 ... 
  hide details  
Reply
post #7027 of 21186
Quote:
Originally Posted by toricred View Post
I'm guessing you meant Q9550/Q9650 since you have the Q9550 in your signature. Is that correct?

Yup, damn fingers, typed too fast.
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 3931A 4.15Ghz Bloodrage Saphire 4870 1g Gskill RipJaws 3x22000 gigs at 1600 7-7-7-20 
Hard DriveOptical DriveOSMonitor
hitachi 500gx3 lite-on blu-ray 8x Win7 x64 BenQ 2400w 
PowerCase
Corsair 620 Hx CM Sniper 
  hide details  
Reply
My System
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 920 D0 3931A 4.15Ghz Bloodrage Saphire 4870 1g Gskill RipJaws 3x22000 gigs at 1600 7-7-7-20 
Hard DriveOptical DriveOSMonitor
hitachi 500gx3 lite-on blu-ray 8x Win7 x64 BenQ 2400w 
PowerCase
Corsair 620 Hx CM Sniper 
  hide details  
Reply
post #7028 of 21186
Quote:
Originally Posted by dennyb View Post
Look in integrated peripherals and make sure Azalia Codec is on auto
I checked it and it was on auto still no analog sound for me.
Origin Genesis-X2
(14 items)
 
Ole X58
(15 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 6950X Broadwell-E ASUS Rampage V Extreme 10 Edition Dual 8GB NVIDIA GeForce GTX 1080 Founders Edition 32GB Kingston DDR4 2666MHz 
Hard DriveHard DriveHard DriveCooling
Intel 240GB SSD 730 Series Samsung 500GB 840 EVO 5TB Western Digital Red ORIGIN CYROGENIC Stage III Hard Line Liquid Coo... 
OSMonitorKeyboardPower
MS Windows 10 Pro Acer B286HK 4K Razer Blackwidow 2016 1600 Watt EVGA SuperNOVA G2 
CaseMouse
Origin Genesis Razer Deathadder Elite 
CPUMotherboardGraphicsRAM
X5650 EVGA Classified 3 x58 E770 MSI GTS 250 lol 12gb Gskill 1600mhz 
Hard DriveHard DriveCoolingOS
Samsung 840 Evo 120GB WD Black 750gb X2 Corsair H100 Windows 10 Pro 
MonitorKeyboardPowerCase
50" 4k Vizeo TV Razer Blackwidow Tournament TX850 Corsair 700D 
Mouse
Razer DeathAdder 
  hide details  
Reply
Origin Genesis-X2
(14 items)
 
Ole X58
(15 items)
 
 
CPUMotherboardGraphicsRAM
Intel Core i7 6950X Broadwell-E ASUS Rampage V Extreme 10 Edition Dual 8GB NVIDIA GeForce GTX 1080 Founders Edition 32GB Kingston DDR4 2666MHz 
Hard DriveHard DriveHard DriveCooling
Intel 240GB SSD 730 Series Samsung 500GB 840 EVO 5TB Western Digital Red ORIGIN CYROGENIC Stage III Hard Line Liquid Coo... 
OSMonitorKeyboardPower
MS Windows 10 Pro Acer B286HK 4K Razer Blackwidow 2016 1600 Watt EVGA SuperNOVA G2 
CaseMouse
Origin Genesis Razer Deathadder Elite 
CPUMotherboardGraphicsRAM
X5650 EVGA Classified 3 x58 E770 MSI GTS 250 lol 12gb Gskill 1600mhz 
Hard DriveHard DriveCoolingOS
Samsung 840 Evo 120GB WD Black 750gb X2 Corsair H100 Windows 10 Pro 
MonitorKeyboardPowerCase
50" 4k Vizeo TV Razer Blackwidow Tournament TX850 Corsair 700D 
Mouse
Razer DeathAdder 
  hide details  
Reply
post #7029 of 21186
hey guys, i have an issue. I am trying to load win7 ultimate x64, but the drivers that giga has are only for the vista 64 version. I tried them but they wont work, has anyone had any luck on win 7 and which drivers are you using??
post #7030 of 21186
Thread Starter 
Quote:
Originally Posted by Sr20kidD View Post
hey guys, i have an issue. I am trying to load win7 ultimate x64, but the drivers that giga has are only for the vista 64 version. I tried them but they wont work, has anyone had any luck on win 7 and which drivers are you using??
Microsoft makes Windows drivers, so I don't understand your question
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
The HedgeHog
(15 items)
 
  
CPUMotherboardGraphicsRAM
3770K Z77-UP7 MSI GTX 680 Twin 4 Gig G.Skill Trident X 2600's and some Dom's Hypers 
Hard DriveCoolingOSMonitor
Yes, lots of them. LN2  The smallest one I can get! Samsung 2333 HD 23" 
PowerCaseMouseMouse Pad
Corisar 1200 AX=1.21 jigawatts Fractal Design/Dimastech G5 Rocketfish 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › Gigabyte EP45-UD3 Series Owners Guide