Overclock.net › Forums › Intel › Intel Motherboards › Gigabyte EP45-UD3 Series Owners Guide
New Posts  All Forums:Forum Nav:

Gigabyte EP45-UD3 Series Owners Guide - Page 983

post #9821 of 21186
so i did it i could only get 400 1200 and 1500 but my heatsink now has a sexy red bottom

i ran out of gaffa tape tho so its not as finished as i would of liked tbh as holding the paper and the heatsink was a right royal p.i.t.a and i ran out when i was just starting with the 1500 so in truth i only did half of what i had planed with it, non the less my temps have dropped 3c idle and 5/6c under load. this is only low voltage testing too i imagine if i had done a before reading on higher vcore the drop might of been better. i know i was hitting 72c in ibt @4.4ghz but for the life of me i cant recall my ambient so....

pic attached
still frags n00bs
(13 items)
 
  
CPUMotherboardGraphicsRAM
4770k z87 oc msi 290x gamer #996997 
Hard DriveCoolingOSMonitor
sandisk extreme 120 xspc raystorm winver 6.1 64 u QX2710LED 
KeyboardPowerMouse
knock off cherry reds 600w enermax volos 
  hide details  
Reply
still frags n00bs
(13 items)
 
  
CPUMotherboardGraphicsRAM
4770k z87 oc msi 290x gamer #996997 
Hard DriveCoolingOSMonitor
sandisk extreme 120 xspc raystorm winver 6.1 64 u QX2710LED 
KeyboardPowerMouse
knock off cherry reds 600w enermax volos 
  hide details  
Reply
post #9822 of 21186
Hey guys, i've owned this board + my q6600 for more than half a year now. I've been doing 3.25ghz stable with my q6600 having a 1.325vid.

I want to get up to 3.5-3.6ghz, any templates i can use? I've been trying all night and morning but i can't get stable past 3.4ghz.

**Btw, it BSOD's at start up when i mean it isn't stable.
2012-2013 Rig
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 2700k @ 4.8ghz asRock Fatal1ty Z68 Professional GEN3 Powercolor AX7990 undervolted to 1.05mv and OC'... Patriot Viper DDR3 1866 CL9 2x4GB 8GB 
Hard DriveOptical DriveCoolingOS
2x128GB Vertex 4 SSD Black Diamond Noctua D14 tri-fan Windows 8.1 
MonitorKeyboardPowerCase
S27A950D G510 Corsair HX1000W CM Storm Stryker 
MouseMouse PadAudio
Best mouse ever made: Logitech G9 RocketFish dual surface Z2300 Logitech 
  hide details  
Reply
2012-2013 Rig
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 2700k @ 4.8ghz asRock Fatal1ty Z68 Professional GEN3 Powercolor AX7990 undervolted to 1.05mv and OC'... Patriot Viper DDR3 1866 CL9 2x4GB 8GB 
Hard DriveOptical DriveCoolingOS
2x128GB Vertex 4 SSD Black Diamond Noctua D14 tri-fan Windows 8.1 
MonitorKeyboardPowerCase
S27A950D G510 Corsair HX1000W CM Storm Stryker 
MouseMouse PadAudio
Best mouse ever made: Logitech G9 RocketFish dual surface Z2300 Logitech 
  hide details  
Reply
post #9823 of 21186
try 1.54 vcore (in bios)
CPU tem (1.52v)
CPU PLL (1.57v)
In line calibration (Disabled)
Check memory ratio and speeds!
Check the memory voltage!
MCH (1.28v)

Try that. That's what i use however you might need a little higher due to your high VID

Good Luck
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
X79-GCN
(22 items)
 
  
CPUMotherboardGraphicsRAM
Intel 3930K 4.5GHz HT GIGABYTE GA-X79-UP4 AMD R9-290X GEil Evo Potenza DDR3 2400MHz CL10 (4x4GB) 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 120GB EK Supremacy (CPU) NF F12's P/P (360 Rad)  NF A14's (420 Rad)  
CoolingCoolingCoolingCooling
XSPC Chrome Compression Fittings EK RES X3 150 Primochill PremoFlex Advanced LRT Clear 1/2 ID EK-FC (R9 290X) 
CoolingCoolingCoolingOS
EK D5 Vario Top-X  Phobya G-Changer V2 360mm Phobya G-Changer V2 420mm Win 10 x64 Pro 
MonitorKeyboardPowerCase
BenQ XR3501 35" Curved Corsair Vengeance K90 Seasonic X-1250 Gold (v2) Corsair 900D 
MouseAudio
Logitech G400s Senn HD 598 
  hide details  
Reply
post #9824 of 21186
Now I am not looking for shortcuts, so I won't ask for any. I just got the board and put my Q6600 GO in it. 2.7 is all I get. OK I know it's me, comming from unlocked AMD's. Because you have to work with the FSB and that affects memory I am finding it much more of a challenge, but perhaps this is good, you learn when challenged. I will ask directions from other members to favorite stickys. I have standard Crucial 800mhz ram, my retailer says I can do all with this low rated ram if I just learn how to work the BIOS better, it does make me wonder why all over the mobo box it screams 1366+ if 800 is all you really need. Is my retailer, "in error" what RAM should I buy if 3.2-3.4 is my goal?
WC Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-930@4.05GHz ASUS P6X58D-Preminum XFX GeForce 275 896mb 6GB Corsair TR3X6G1600C8D 
Hard DriveOptical DriveOSMonitor
WD 150gb Raptor LightScan Win 7 64-bit Acer 22" 
KeyboardPowerCaseMouse
G15 Corsair HX620W Antec 1200 several various 
Mouse Pad
none 
  hide details  
Reply
WC Rig
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7-930@4.05GHz ASUS P6X58D-Preminum XFX GeForce 275 896mb 6GB Corsair TR3X6G1600C8D 
Hard DriveOptical DriveOSMonitor
WD 150gb Raptor LightScan Win 7 64-bit Acer 22" 
KeyboardPowerCaseMouse
G15 Corsair HX620W Antec 1200 several various 
Mouse Pad
none 
  hide details  
Reply
post #9825 of 21186
Quote:
Originally Posted by marsey99 View Post
so i did it i could only get 400 1200 and 1500 but my heatsink now has a sexy red bottom

i ran out of gaffa tape tho so its not as finished as i would of liked tbh as holding the paper and the heatsink was a right royal p.i.t.a and i ran out when i was just starting with the 1500 so in truth i only did half of what i had planed with it, non the less my temps have dropped 3c idle and 5/6c under load. this is only low voltage testing too i imagine if i had done a before reading on higher vcore the drop might of been better. i know i was hitting 72c in ibt @4.4ghz but for the life of me i cant recall my ambient so....

pic attached
Its a nice job you got there. Any chance you're gonna lap the processor?
GoodEnough.
(13 items)
 
  
CPUMotherboardGraphicsRAM
meh meh meh meh 
Hard DriveOSMonitorPower
meh W7U x64 Meh meh 
CaseMouseMouse Pad
Meh Generic Generic 
  hide details  
Reply
GoodEnough.
(13 items)
 
  
CPUMotherboardGraphicsRAM
meh meh meh meh 
Hard DriveOSMonitorPower
meh W7U x64 Meh meh 
CaseMouseMouse Pad
Meh Generic Generic 
  hide details  
Reply
post #9826 of 21186
I reset the cmos, load optimum settings, go in BIOS and set my timings manually and voltages to the rated level.
Froggy
(20 items)
 
  
CPUMotherboardGraphicsRAM
i7-7700k Asus PRIME z270-A MSI 980Ti Gaming 6G 32GB (2x16GB) Corsair LPX vengeance 3000 
Hard DriveCoolingOSMonitor
Samsung 840 250GB Nocthua D14 Win 10 PRO 64bit 24" Asus VS248H-P 
MonitorKeyboardPowerCase
24" Asus VS248H-P Corsair K70 EVGA Supernova 750 G2 Corsair Carbide 300r 
MouseMouse PadAudioAudio
Corsair Simitar X-ray Thunder 8 Fiio e10 Shure HE215 
AudioAudioOther
AKG K550 Samson Go-mic Raser Nostromo 
  hide details  
Reply
Froggy
(20 items)
 
  
CPUMotherboardGraphicsRAM
i7-7700k Asus PRIME z270-A MSI 980Ti Gaming 6G 32GB (2x16GB) Corsair LPX vengeance 3000 
Hard DriveCoolingOSMonitor
Samsung 840 250GB Nocthua D14 Win 10 PRO 64bit 24" Asus VS248H-P 
MonitorKeyboardPowerCase
24" Asus VS248H-P Corsair K70 EVGA Supernova 750 G2 Corsair Carbide 300r 
MouseMouse PadAudioAudio
Corsair Simitar X-ray Thunder 8 Fiio e10 Shure HE215 
AudioAudioOther
AKG K550 Samson Go-mic Raser Nostromo 
  hide details  
Reply
post #9827 of 21186
I got all the way to 3.2ghz range and have hit a wall. I upped the vcore a bit higher than most would suggest but temps at the below settings haven't broken 47C. This is what I have right now.

Code:
CPU = E2180
Motherboard = EP45-UD3P 
BIOS Version = F8
Ram = 1x 2GB OCZ Reaper 1066
 
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster .............: Auto
CPU Clock Ratio .....................: 9
Fine CPU Clock Ratio.................: 
CPU Frequency .......................: 3.24 (360x9)
 
 
Clock Chip Control 
Standard Clock Control
CPU Host Clock Control...............: enabled
CPU Host Frequency (Mhz) ............: 360
PCI Express Frequency (Mhz) .........: 100
 
 
DRAM Performance Control
Performance Enhance..................: turbo
Extreme Memory Profile (X.M.P.)......: auto
(G)MCH Frequency Latch...............: 333mhz
System Memory Multiplier ............: 2.40B
Memory Frequency (Mhz) ..............:  864
DRAM Timing Selectable ..............: Manual
 
Standard Timing Control 
CAS Latency Time.....................: 5 
tRCD ................................: 5
tRP..................................: 5 
tRAS.................................: 15 
 
 
Advanced Timing Control (all on auto)
tRRD.................................: 4
tWTR.................................: 4
tWR..................................: 8
tRFC.................................: 72
tRTP.................................: 4
Command Rate (CMD) ..................: 0
 
 
Channel A
Static tRead Value...................: 
Channel B
Static tRead Value...................: 
 
 
Motherboard Voltage Control
CPU
Load Line Calibration (LLC) .........: Enabled
CPU Vcore............................: 1.42500v
CPU Termination.....1.200V*..........: 1.28v
CPU PLL.............1.500V*..........: 1.50v
CPU Referen.........0.755V*..........: Normal
 
MCH/ICH
MCH Core............1.100V...........: 1.30v
MCH Reference.......0.800V...........: Normal
MCH/DRAM Ref........0.900V...........: Normal
ICH I/O.............1.500V...........: Normal
ICH Core............1.100V...........: Normal
 
DRAM
DRAM Voltage .........1.800V.........:
DRAM Termination .....0.900V.........:
Channel A Reference ..0.900V.........:
Channel B Reference ..0.900V.........:


I've been trying to boot higher. 375x9 wouldn't boot into windows. 400x8 and 450x7 wouldn't either, I was trying to see if it was an fsb wall on the chip. Do I need to fine tune some PLL's or ref's? I have temp and voltage headroom to keep going!


Edit: Forgot to mention, the template posted is IBT stable, I just can't seem to get any higher.
Silentium
(14 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX 8320 SABERTOOTH 990FX ASUS R9 270X G.Skill Ripjaw 
Hard DriveHard DriveOptical DriveOS
Crucial m4 320GB WD Caviar Blue Samsung DVD-RW Windows 7 Pro x64 
MonitorKeyboardPowerCase
24' Asus Razer Black Widow Corsair TX750w Silentium - custom acrylic case 
MouseMouse Pad
Cyborg RAT 7 In-Win Batmat 
  hide details  
Reply
Silentium
(14 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX 8320 SABERTOOTH 990FX ASUS R9 270X G.Skill Ripjaw 
Hard DriveHard DriveOptical DriveOS
Crucial m4 320GB WD Caviar Blue Samsung DVD-RW Windows 7 Pro x64 
MonitorKeyboardPowerCase
24' Asus Razer Black Widow Corsair TX750w Silentium - custom acrylic case 
MouseMouse Pad
Cyborg RAT 7 In-Win Batmat 
  hide details  
Reply
post #9828 of 21186
465x8.5 = Stable.

Temps are much cooler now. 68C Max.

What do I need to do?
 
Sharpie
(18 items)
 
CPUMotherboardGraphicsRAM
i7 950 4GHz 1.28v ASUS Rampage III Formula ASUS 5870 2GB Eyefinity 6 G.Skill RipJaws 6GB (3x2GB) 
Hard DriveHard DriveHard DriveHard Drive
Corsair Force Series GT 240GB SSD 300GB VelociRaptor Western Digital 640GB AAKS Samsung F3 1TB 
Optical DriveOSMonitorMonitor
2x Sony Optiarc - 24X DVD Windows 7 Ultimate x64 Samsung 24" P2450 Samsung 24" P2450 
MonitorKeyboardPowerCase
Dell 1905 - 19" Das Keyboard Pro Model M Corsair 1000HX HAF X 
MouseMouse Pad
Logitech G5 X TRAC Pads Ripper XXL 
  hide details  
Reply
 
Sharpie
(18 items)
 
CPUMotherboardGraphicsRAM
i7 950 4GHz 1.28v ASUS Rampage III Formula ASUS 5870 2GB Eyefinity 6 G.Skill RipJaws 6GB (3x2GB) 
Hard DriveHard DriveHard DriveHard Drive
Corsair Force Series GT 240GB SSD 300GB VelociRaptor Western Digital 640GB AAKS Samsung F3 1TB 
Optical DriveOSMonitorMonitor
2x Sony Optiarc - 24X DVD Windows 7 Ultimate x64 Samsung 24" P2450 Samsung 24" P2450 
MonitorKeyboardPowerCase
Dell 1905 - 19" Das Keyboard Pro Model M Corsair 1000HX HAF X 
MouseMouse Pad
Logitech G5 X TRAC Pads Ripper XXL 
  hide details  
Reply
post #9829 of 21186
Have you tried raising you term, maybe put your pll to 1.57-1.59. You can also play with the clock skew maybe add 50ps to mch.
Froggy
(20 items)
 
  
CPUMotherboardGraphicsRAM
i7-7700k Asus PRIME z270-A MSI 980Ti Gaming 6G 32GB (2x16GB) Corsair LPX vengeance 3000 
Hard DriveCoolingOSMonitor
Samsung 840 250GB Nocthua D14 Win 10 PRO 64bit 24" Asus VS248H-P 
MonitorKeyboardPowerCase
24" Asus VS248H-P Corsair K70 EVGA Supernova 750 G2 Corsair Carbide 300r 
MouseMouse PadAudioAudio
Corsair Simitar X-ray Thunder 8 Fiio e10 Shure HE215 
AudioAudioOther
AKG K550 Samson Go-mic Raser Nostromo 
  hide details  
Reply
Froggy
(20 items)
 
  
CPUMotherboardGraphicsRAM
i7-7700k Asus PRIME z270-A MSI 980Ti Gaming 6G 32GB (2x16GB) Corsair LPX vengeance 3000 
Hard DriveCoolingOSMonitor
Samsung 840 250GB Nocthua D14 Win 10 PRO 64bit 24" Asus VS248H-P 
MonitorKeyboardPowerCase
24" Asus VS248H-P Corsair K70 EVGA Supernova 750 G2 Corsair Carbide 300r 
MouseMouse PadAudioAudio
Corsair Simitar X-ray Thunder 8 Fiio e10 Shure HE215 
AudioAudioOther
AKG K550 Samson Go-mic Raser Nostromo 
  hide details  
Reply
post #9830 of 21186
Quote:
Originally Posted by GOTFrog View Post
Have you tried raising you term, maybe put your pll to 1.57-1.59. You can also play with the clock skew maybe add 50ps to mch.
Was this @ me Frog?
Silentium
(14 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX 8320 SABERTOOTH 990FX ASUS R9 270X G.Skill Ripjaw 
Hard DriveHard DriveOptical DriveOS
Crucial m4 320GB WD Caviar Blue Samsung DVD-RW Windows 7 Pro x64 
MonitorKeyboardPowerCase
24' Asus Razer Black Widow Corsair TX750w Silentium - custom acrylic case 
MouseMouse Pad
Cyborg RAT 7 In-Win Batmat 
  hide details  
Reply
Silentium
(14 items)
 
  
CPUMotherboardGraphicsRAM
AMD FX 8320 SABERTOOTH 990FX ASUS R9 270X G.Skill Ripjaw 
Hard DriveHard DriveOptical DriveOS
Crucial m4 320GB WD Caviar Blue Samsung DVD-RW Windows 7 Pro x64 
MonitorKeyboardPowerCase
24' Asus Razer Black Widow Corsair TX750w Silentium - custom acrylic case 
MouseMouse Pad
Cyborg RAT 7 In-Win Batmat 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › Gigabyte EP45-UD3 Series Owners Guide