Originally Posted by the magical me
1.)...whether I will be able to do the overclocking depending on the stock CPU fan,
2.)...and the stock heatsink too??
3.)...and also depending on a power suopply ...supply not less than 300 watts,
4.)...so how much do yo assume I will notice by going to 5%,
5.)...and do I have to set anything else if I start with 5%
6.)...by proceeding with an auotomatic overclocking the motherboard will do the others thing as to suit the ram speed with the desired overclocking percentage choosen ???
1.) You will be able to overclock, but your overclocks will likely be limited by heat. Monitor full load temps carefully.
3.) 300 watts is pretty weak. Monitor full load voltages carefully.
4.) You'll notice about 5% ???????
5.) No, not if you're using automatic overclocking. Just disable any other automatic speed controls (Speed Step?).
You might want to spend some time learning how CPU and memory speeds are calculated from FSB, Multipliers and Dividers.Edited by billbartuska - 12/16/08 at 1:56am