post #11 of 11
Quote:
Originally Posted by AZWhitebread View Post
Just put together my new system. The specs are below. The computer turns on, and all the LEDs light up and the fans turn on, but i don't get any picture. The monitor will turn on, but i don't get any signal. The only thing i get is 3 red LEDs on the video card flashing. The HDD light on the case also blinks, but all the connections seem to be hooked up properly. Anyone have any ideas?

ASUS M3A79-T Deluxe
Phenom 9950 BE 125w
SAPPHIRE 100259-1GL Radeon HD 4870 1GB
CORSAIR DOMINATOR 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066
Western Digital Caviar SE16 WD5000AAKS 500GB 7200 RPM SATA 3.0Gb/s
Acer P243WAid Black-Silver 24" 2ms(GTG) HDMI Widescreen LCD Monitor
COOLER MASTER RC-690-KKN1-GP Black SECC/ ABS ATX Mid Tower Computer Case
850W rosewill PS
If you consult your manual your motherboard should have some sort of trouble shooting mechanism to tell you what parts of the hardware are bad. Maybe LEDs or diagnostic beeps... check that out. Check to make sure all the power cables are correctly plugged in, (24 pin mobo connector, 8 or 4 pin CPU connector, graphics 6 pin, ect). The quality control on the corsair dominators is generally good but you may have luck with booting only one stick instead. All the hardware is new right? If so then it may be a motherboard issue.... as the failure rate on them is a little higher then the other hardware you have. The spinning fans makes it a little less likely it is the power supply.... and it is pretty rare to get a chip that doesn't work out of factory.