I firstly started this thread off as a Asus Rampage Formula(X48) Thread but then as suggested by some of the members of OCN I decided to turn this in to a “Asus Republic Of Gamers Series Motherboards Club.â€
All the members of the previous Rampage club will be still on the lists.
I know there is a lot of Asus ROG series Mother board owners out here in OCN and I would love it if you would join.
Here is the code for all your signatures:
Code:
Code:
[CODE]
[center][size=1][url=" http://www.overclock.net/intel-motherboards/426626-official-asus-republic-gamers-series-motherboard.html#post5109204 "] [b]The Official Asus Republic Of Gamers Series Motherboard Club[/b] [/url][/size][/center]
Last but not least the requirements for the Club:
-Own a Rampage, Striker or Maximus Series Motherboard from Asus.
-Show proof that you do own it (By CPU-Z Validation, Bench Mark, Pic of inside your case.)
-The want to show everyone that you own one (duh).
Here is a Brilliant BIOS overclock template made by Ghostleader,
Thanks a lot,
Everyone should fill it in and show us your OC's
Code:
Code:
[CODE]
ASUS Rampage Formula BIOS 0407 Template
*Extreme Tweaker*
Ai Overclock Tuner []
CPU Ratio Setting []
FSB Strap to North Bridge []
FSB Frequency []
PCIE Frequency []
DRAM Frequency []
DRAM Command Rate []
DRAM CMD Skew on Channal A []
DRAM CMD Skew on Channal B []
DRAM CLK Skew on Channal A []
DRAM CLK Skew on Channal B []
DRAM Timing Control []
1st Information
CAS# Latency []
RAS# to CAS# Delay []
RAS# PRE Time []
RAS# ACT Time []
RAS# to RAS# Delay []
REF Cycle Time []
WRITE Recovery Time []
READ to PRE Time []
2nd Information
READ to WRITE Delay (S/D) []
WRITE to READ Delay (S) []
WRITE to READ Delay (D) []
READ to READ Delay (S) []
READ to READ Delay (D) []
WRITE to WRITE Delay (S) []
WRITE to WRITE Dealy (D) []
3rd Information
WRITE to PRE Delay []
READ to PRE Delay []
PRE to PRE Delay []
ALL PRE to ACT Delay []
ALL PRE to REF Delay []
DRAM Static Read Control []
Ai Clock Twister []
Ai Transation Booster []
Common Performance Booster []
Pull-In of CHA PH1 []
Pull-In of CHA PH2 []
Pull-In of CHA PH3 []
Pull-In of CHA PH4 []
Pull-In of CHA PH5 []
Pull-In of CHA PH6 []
Pull-In of CHB PH1 []
Pull-In of CHB PH2 []
Pull-In of CHB PH3 []
Pull-In of CHB PH4 []
Pull-In of CHB PH5 []
Pull-In of CHB PH6 []
CPU Voltage []
CPU PLL Voltage []
DRAM Voltage []
FSB Termination Voltage []
South Bridge Voltage []
SB 1,5V Voltage []
Loadline Calibration []
CPU GTL Voltage Reference []
NB GTL Voltage Reference []
DRAM Controller Voltage REF []
DRAM Channel A Voltage REF []
DRAM Channel B Voltage REF []
CPU LED Selection []
NB LED Selection []
SB LED Selection []
Voltiminder LED []
CPU Spread Spectrum []
PCIE Spred Spectrum []
*Advanced settings*
CPU Ratio Setting []
C1E Support []
CPU TM Function []
Vanderpool Technology []
Execute Disable Bit []
Max CPUID Value Limit []
But the board is rock solid running a 3.8GHz OC with my Q6700 at 9x multi and 423 FSB. Its also running 4x2Gb G.Skill DDR2 1066 at only 1.94v vdimm, so it handles 8Gb of ram very well.
But the board is rock solid running a 3.8GHz OC with my Q6700 at 9x multi and 423 FSB. Its also running 4x2Gb G.Skill DDR2 1066 at only 1.94v vdimm, so it handles 8Gb of ram very well.
Originally Posted by jeffries7
add me to the list please, will take some pictures when i can find the cable to connect my camera and when my barracuda's get here
if you want validation look at my cpu-z validation.
Originally Posted by gig
Add me too. I'll take some pics when I find my camera. Check my cpu-z validation.
Added
Yours sincerely,
JoshsPC
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Ask a question
Ask a question
Overclock.net
27.8M posts
541.2K members
Since 2004
A forum community dedicated to overclocking enthusiasts and testing the limits of computing. Come join the discussion about computing, builds, collections, displays, models, styles, scales, specifications, reviews, accessories, classifieds, and more!