Overclock.net › Forums › Intel › Intel Motherboards › Stability Help
New Posts  All Forums:Forum Nav:

Stability Help

post #1 of 5
Thread Starter 
Hi, I'm new to overclocking and I've managed to do a slight overclock.

I've done test using Orthos for 12 hours no errors running Small FFTs, and ran MemTest86+ for 2 passes no errors.

But whenever I run something like Orthos and run a Blend test, my system freezes, gets a blue screen, etc. Any way that I can stabilize both of these?
post #2 of 5
You might want to increase voltage to the SPP(northbridge). What is your OC currently at?
post #3 of 5
Thread Starter 
Quote:
Originally Posted by flyin15sec View Post
You might want to increase voltage to the SPP(northbridge). What is your OC currently at?
At 4.05 Ghz
426 FSB, RAM is at 853mhz

Voltages:
Core: 1.336
FSB: 1.4
Memory: 2.1
SPP: 1.4
post #4 of 5
Increase voltage to the Northbridge and FSB.
post #5 of 5
Thread Starter 
Increased FSB and Northbridge to 1.45 and still bluescreen'd after about 15 minutes. D:
Edited by omgdaniel - 12/18/08 at 3:25pm
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › Stability Help