post #1 of 1
Thread Starter 
Hi, I'm new at overclocking so I'm kinda scared of overclocking. So I overclocked slowly and simple by raising the fsb. I ended up at 3.0ghz since I was scared of going higher but...
BUT since the multiplier is 12.5 and fsb is 240 I haven't used my RAM at it's best. Now I hope someone could help me with setting my ram to 1:1. I also use stock cooler btw

E5200 currently at 3.00ghz ( 12.5x240)
4gb dual channel OCZ pc2-6400
asus P5Q P45 1600 board

temperature, cpu-z processor and ram screens ( after overclocking to 3.0ghz ):


idle temperatures

temperatures after orthos

is this okay?