Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › antec 900 transformation*pics page 5*
New Posts  All Forums:Forum Nav:

antec 900 transformation*pics page 5* - Page 6

post #51 of 58
http://www.frozencpu.com/products/18...?tl=g44c34s276

You can also find the Reset Switch cable extension on that site. You really just need a 2-pin extension so it doesn't matter which one you choose (they are different colors and are labeled differently). If you really want to save money just splice in a couple of extra inches on the front panel cables.
First Build
(13 items)
 
  
CPUMotherboardGraphicsRAM
E5200 Wolfdale 3.25GHz @ 1.28v Gigabyte P35-DS3L Sapphire HD 4830 512MB OCZ Platinum 2x1GB 1066 
OSMonitorPowerCase
Windows XP 32-bit 19" LCD 1280 x 1024 OCZ StealthXStream 600W Antec Nine Hundred 
  hide details  
Reply
First Build
(13 items)
 
  
CPUMotherboardGraphicsRAM
E5200 Wolfdale 3.25GHz @ 1.28v Gigabyte P35-DS3L Sapphire HD 4830 512MB OCZ Platinum 2x1GB 1066 
OSMonitorPowerCase
Windows XP 32-bit 19" LCD 1280 x 1024 OCZ StealthXStream 600W Antec Nine Hundred 
  hide details  
Reply
post #52 of 58
Quote:
Originally Posted by 500sd View Post
obviously im not going to spend 100$ on this but im just clarifying that i have money to spend

im young dude, i go for that whole "ridiculously unnecessary computer" look.
Hahaha that's exactly what I aim for... check my Cosmos S link.

Dude i would put some stealth Scythe S-FLEX fans and then some nicely positioned red 4"cathodes to give the red glow.

That way you'll get the glow and also benefit from a quieter and cooler computer. I went from red Antec Tricools to normal s-flex fans and my GPU temps dropped 10C at idle... 10C!!!!!


Oh and about white cathodes.. they only look cool if your case is perfectly clean.. like not a single little dust particle or anything, and nice neat cables. I believe VoodooPC used white cathodes on some of its later systems where the water loops were colored and it looked plain sick.
Edited by NoodleGTS - 12/30/08 at 11:50am
post #53 of 58
Quote:
Originally Posted by GoHigh View Post
Just turning your computer from BLUE to RED is hardly CUSTOM. Seems like a pointless waste of $100 to me... But I guess if that's your thing.

Here is a radical idea...

Why not just take out all the BLUE fans and replace it with quieter non-led ones. You can even call it... Stealth or something.
Here's a radical idea:

Stop being so sarcastic.

Whether or not it's a pointless waste of an investment to you is irrelevant since it's not your rig. Try giving relevant advice instead of making asinine suggestions.

Thank you sir.

Quote:
Originally Posted by GoHigh View Post
But if you are into that ridiculous all show and no go, Christmas lights look, then go for it.
Whats really ridiculous is your unnecessary condescension and rudeness towards him.

Quote:
Originally Posted by Higgins View Post
I think it looks cool, but not "ridiculously unnecessary" at all.

You should go for a incognito look cable wise and go from there..

Hide ALL cables either behind the motherboard plate or just inside the HDD cages.. it'll give it a whole new look
I agree.
post #54 of 58
Thread Starter 
Quote:
Originally Posted by NoodleGTS View Post
Hahaha that's exactly what I aim for... check my Cosmos S link.

Dude i would put some stealth Scythe S-FLEX fans and then some nicely positioned red 4"cathodes to give the red glow.

That way you'll get the glow and also benefit from a quieter and cooler computer. I went from red Antec Tricools to normal s-flex fans and my GPU temps dropped 10C at idle... 10C!!!!!


Oh and about white cathodes.. they only look cool if your case is perfectly clean.. like not a single little dust particle or anything, and nice neat cables. I believe VoodooPC used white cathodes on some of its later systems where the water loops were colored and it looked plain sick.
woah noodle your cosmo s looks sick! but i already ordered 4 red led yate loons.

and @ stove, so your saying i can just buy 3 of those and just hook em up to each cable and it will work fine?

and @ miki, thanks for the pwnage

i really want to cut more holes but im gonna seem like a pest to my neighbors dad lol.

and if you guys haven't noticed my 24 pin power connector is on the left side of my mobo, which is a pain...i had to run it through the little square in the corner of my 8800 but theres a giant kink above my power supply now.
Sony FW Series
(14 items)
 
  
CPUGraphicsRAMHard Drive
C2D P8700 2.53 Ghz HD 4650 1gb 4gb DDR2-800 2x2gb 320gb 5400rpm 
OSMonitorAudio
W7 16.4" widescreen with XBRITE-FullHD™ 1920 x 1080 M-Audio MobilePre v2, Beyerdynamic DT770 Pro 80ohm 
  hide details  
Reply
Sony FW Series
(14 items)
 
  
CPUGraphicsRAMHard Drive
C2D P8700 2.53 Ghz HD 4650 1gb 4gb DDR2-800 2x2gb 320gb 5400rpm 
OSMonitorAudio
W7 16.4" widescreen with XBRITE-FullHD™ 1920 x 1080 M-Audio MobilePre v2, Beyerdynamic DT770 Pro 80ohm 
  hide details  
Reply
post #55 of 58
Thread Starter 
wow the place where i ordered the fans from hasn't even shipped them out yet what the hell
i payed 16 dollars for shipping and i get this?!
Sony FW Series
(14 items)
 
  
CPUGraphicsRAMHard Drive
C2D P8700 2.53 Ghz HD 4650 1gb 4gb DDR2-800 2x2gb 320gb 5400rpm 
OSMonitorAudio
W7 16.4" widescreen with XBRITE-FullHD™ 1920 x 1080 M-Audio MobilePre v2, Beyerdynamic DT770 Pro 80ohm 
  hide details  
Reply
Sony FW Series
(14 items)
 
  
CPUGraphicsRAMHard Drive
C2D P8700 2.53 Ghz HD 4650 1gb 4gb DDR2-800 2x2gb 320gb 5400rpm 
OSMonitorAudio
W7 16.4" widescreen with XBRITE-FullHD™ 1920 x 1080 M-Audio MobilePre v2, Beyerdynamic DT770 Pro 80ohm 
  hide details  
Reply
post #56 of 58
Thread Starter 
wow i ordered it christmas day, and the yate loons still havent even been shipped!
has anyone ordered from specialtech.co.uk internationally?
Edited by 500sd - 1/10/09 at 8:43pm
Sony FW Series
(14 items)
 
  
CPUGraphicsRAMHard Drive
C2D P8700 2.53 Ghz HD 4650 1gb 4gb DDR2-800 2x2gb 320gb 5400rpm 
OSMonitorAudio
W7 16.4" widescreen with XBRITE-FullHD™ 1920 x 1080 M-Audio MobilePre v2, Beyerdynamic DT770 Pro 80ohm 
  hide details  
Reply
Sony FW Series
(14 items)
 
  
CPUGraphicsRAMHard Drive
C2D P8700 2.53 Ghz HD 4650 1gb 4gb DDR2-800 2x2gb 320gb 5400rpm 
OSMonitorAudio
W7 16.4" widescreen with XBRITE-FullHD™ 1920 x 1080 M-Audio MobilePre v2, Beyerdynamic DT770 Pro 80ohm 
  hide details  
Reply
post #57 of 58
Thread Starter 
any idea on what i should do about my 24 pin connector? its really bugging me since the connector on the mobo is on the left...the pic is on page 4
Sony FW Series
(14 items)
 
  
CPUGraphicsRAMHard Drive
C2D P8700 2.53 Ghz HD 4650 1gb 4gb DDR2-800 2x2gb 320gb 5400rpm 
OSMonitorAudio
W7 16.4" widescreen with XBRITE-FullHD™ 1920 x 1080 M-Audio MobilePre v2, Beyerdynamic DT770 Pro 80ohm 
  hide details  
Reply
Sony FW Series
(14 items)
 
  
CPUGraphicsRAMHard Drive
C2D P8700 2.53 Ghz HD 4650 1gb 4gb DDR2-800 2x2gb 320gb 5400rpm 
OSMonitorAudio
W7 16.4" widescreen with XBRITE-FullHD™ 1920 x 1080 M-Audio MobilePre v2, Beyerdynamic DT770 Pro 80ohm 
  hide details  
Reply
post #58 of 58
Thread Starter 
just installed red rosewill fans and hooked them up to my fan controller, sound is slightly quieter than before. pics will be up once i get my camera back from my bro
Sony FW Series
(14 items)
 
  
CPUGraphicsRAMHard Drive
C2D P8700 2.53 Ghz HD 4650 1gb 4gb DDR2-800 2x2gb 320gb 5400rpm 
OSMonitorAudio
W7 16.4" widescreen with XBRITE-FullHD™ 1920 x 1080 M-Audio MobilePre v2, Beyerdynamic DT770 Pro 80ohm 
  hide details  
Reply
Sony FW Series
(14 items)
 
  
CPUGraphicsRAMHard Drive
C2D P8700 2.53 Ghz HD 4650 1gb 4gb DDR2-800 2x2gb 320gb 5400rpm 
OSMonitorAudio
W7 16.4" widescreen with XBRITE-FullHD™ 1920 x 1080 M-Audio MobilePre v2, Beyerdynamic DT770 Pro 80ohm 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Case Mods
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › antec 900 transformation*pics page 5*