I'm not sure, I have tried to use clockgen numerous times but just ends with my system freezing.
post #31 of 49
12/22/08 at 5:45pm
Occasionally you will hit a few ranges on the 780 [~370-399 and 420-450mhz FSB for me] that either will not perform up to par or are just not stable at all.
ie- I loose ~2k on Read bandwidth, dropping from 450mhz to 449mhz FSB = WTH
...these 'FSB holes' need to be jumped..so dont bother attempting to scale through them.
**As for Clockgen, it will automatically pick-up the correct PLL clock for the 780i..all you need to do is raise the FSB with the slider, a few Mhz at a time and hit 'Apply'.