Back at you space@pe. Excellent and comprehensive material you supplied there. Hadn't thought of upping the skews any further. So obvious once you get it huh?
Well rep for the info and thanks to whoever repped me
snacks >another one<
hmm a little more
Edit: tinkered around with a lot of bios settings and ended up with
cpu pll at 1.58v hmm seems a little high but all other settings from
is it normal for the cpu pll to be this tricky?
my fsb termanation volt is already at 1.40v (vNB@1.49v..to high?)
& im not really feeling good about raising it much more.
well this is properly my last attempt to keep this clock stable
without raising the vcore
after this i think i need to either
raise it or lower my clock a bit.
i'll keep u guys updated
...bsod while transfering to usb flash
(& runnig prime blend). so i upped all exept the vcore a little
bit..right now i just want results im getting tired of not
knowing what the deal is
if my hardware survives i
can always lower the volt settings again
Edit#2: ok so it didn't work..trying now to put the clock
down 1 notch at a time Edited by space@pe - 5/26/09 at 6:17pm