Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] Cooler Master ATCS 840 Owners Club
New Posts  All Forums:Forum Nav:

[Official] Cooler Master ATCS 840 Owners Club - Page 439

post #4381 of 4389
Why don't you just take the existing legs off, replace the bolt holding it on with a longer one, and add some rather large washers with a small hole in them to add the necessary height. Should look good and be rather cheap on the pocket book.
Brutus
(14 items)
 
  
CPUMotherboardGraphicsRAM
e6400 evga 680i Evga 8800 GT Crucial Ballistix 2GB ddr2 1000 
Hard DriveCoolingOSMonitor
Seagate sata 250gb raid1 Zalman 9900 Windows Vista LG W2600H 
KeyboardPowerCaseMouse
MS cordless Pc Power & Cooling 750 w silencer Thermaltake Mozart MS cordless 
  hide details  
Reply
Brutus
(14 items)
 
  
CPUMotherboardGraphicsRAM
e6400 evga 680i Evga 8800 GT Crucial Ballistix 2GB ddr2 1000 
Hard DriveCoolingOSMonitor
Seagate sata 250gb raid1 Zalman 9900 Windows Vista LG W2600H 
KeyboardPowerCaseMouse
MS cordless Pc Power & Cooling 750 w silencer Thermaltake Mozart MS cordless 
  hide details  
Reply
post #4382 of 4389
Old Guy wrote "Those taller feet from MNPCTech look great, thanks for that lead.
Quote:
Originally Posted by edruns69 View Post

Why don't you just take the existing legs off, replace the bolt holding it on with a longer one, and add some rather large washers with a small hole in them to add the necessary height. Should look good and be rather cheap on the pocket book.

Yes that's a good idea. The MNPCTech feet are about $40 plush shipping. I had your idea in my plan book originally and just never got to it. I was a little concerned about longer screws and though about drilling and tapping for larger diameter, but it was really just never got to it.

But as in my later post it turns out the bottom intake fan noise was not because of restricted airflow, but from running at > spec RPM. So "overclocking" my fan has a penalty smile.gif And if I build a rolling caddy it will either hold the case farther above a base or have large airflow openings in the base.

Thanks.

OG
Evolving Plan
(35 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Xeon W3680 Westmere-EP Gigabyte GA-X58A-UD3R (Rev. 2) PNY (Nvidia) Quadro 2000 1GB PNY (Nvidia) Quadro 400 for 3rd monitor 
RAMHard DriveHard DriveHard Drive
Mushkin Silverline (6 x 4)=24 GB DDR3 1333 C(OS): 120GB OCZ Vertex 3 - MAX IOPS Edition, S... D(Data): two WD RE4 1TB 3.0Gb/s (RAID 1)  Two WD RE4 1TB 3.0Gb/s to be used in hot swap b... 
Hard DriveHard DriveHard DriveOptical Drive
WD Blue 500AZLX 500GB, in hot swap bay. Used t... Two PATA legacy drives mounted between PSU (rea... LaCie D2 Quadra 1TB e-SATA 3.0 Gb/s (for immedi... Sony Optiarc AD-7261S-OB 
CoolingCoolingCoolingCooling
Case stock fans: one 230mm front intake, two 23... CM External GPU Duct & CM 120mm Ex. Fan Noctua NF-P14 FLX 140mm (addl. bottom case intake) Noctua NF-P14 FLX 140mm (addl. rear case exhaust) 
CoolingCoolingCoolingCooling
Prolimatech Megahalems Rev. B. CPU heat sink Noctua NF-P12 1300R 120mm push fan on CPU heat ... Scythe Kaze Master Pro 6 channel fan controller 70mm fan on i-Star hot swap HDD cage (disconnec... 
OSMonitorMonitorMonitor
Windows 7 Professional 64 bit HP Pavilion 23xi HP Pavillion 27xi (1) HP Pavillion 27xi (2) 
KeyboardPowerCaseMouse
Logitech K330 Wireless w/mouse Seasonic Platinum-860 80 Plus 860 Watts ... CM ATCS 840 (minor mods) Logitech K330 wireless 
Mouse PadAudioOtherOther
Some freebee with an advert on it Cyber Acoustics CA-1001WB 5.25" Drive Bay for now  i-Star USA three bay, 3.5" hot swap cage (in tw... Drive A: Internal FDD w/ multi card readers & 1... 
OtherOtherOther
Startech USB 2.0. 7 port PCI Card 8GB Verbatim Flash Drive. Internal system docu... Netgear N900 Router 
  hide details  
Reply
Evolving Plan
(35 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Xeon W3680 Westmere-EP Gigabyte GA-X58A-UD3R (Rev. 2) PNY (Nvidia) Quadro 2000 1GB PNY (Nvidia) Quadro 400 for 3rd monitor 
RAMHard DriveHard DriveHard Drive
Mushkin Silverline (6 x 4)=24 GB DDR3 1333 C(OS): 120GB OCZ Vertex 3 - MAX IOPS Edition, S... D(Data): two WD RE4 1TB 3.0Gb/s (RAID 1)  Two WD RE4 1TB 3.0Gb/s to be used in hot swap b... 
Hard DriveHard DriveHard DriveOptical Drive
WD Blue 500AZLX 500GB, in hot swap bay. Used t... Two PATA legacy drives mounted between PSU (rea... LaCie D2 Quadra 1TB e-SATA 3.0 Gb/s (for immedi... Sony Optiarc AD-7261S-OB 
CoolingCoolingCoolingCooling
Case stock fans: one 230mm front intake, two 23... CM External GPU Duct & CM 120mm Ex. Fan Noctua NF-P14 FLX 140mm (addl. bottom case intake) Noctua NF-P14 FLX 140mm (addl. rear case exhaust) 
CoolingCoolingCoolingCooling
Prolimatech Megahalems Rev. B. CPU heat sink Noctua NF-P12 1300R 120mm push fan on CPU heat ... Scythe Kaze Master Pro 6 channel fan controller 70mm fan on i-Star hot swap HDD cage (disconnec... 
OSMonitorMonitorMonitor
Windows 7 Professional 64 bit HP Pavilion 23xi HP Pavillion 27xi (1) HP Pavillion 27xi (2) 
KeyboardPowerCaseMouse
Logitech K330 Wireless w/mouse Seasonic Platinum-860 80 Plus 860 Watts ... CM ATCS 840 (minor mods) Logitech K330 wireless 
Mouse PadAudioOtherOther
Some freebee with an advert on it Cyber Acoustics CA-1001WB 5.25" Drive Bay for now  i-Star USA three bay, 3.5" hot swap cage (in tw... Drive A: Internal FDD w/ multi card readers & 1... 
OtherOtherOther
Startech USB 2.0. 7 port PCI Card 8GB Verbatim Flash Drive. Internal system docu... Netgear N900 Router 
  hide details  
Reply
post #4383 of 4389
Quote:
Originally Posted by Adhmuz View Post

Also I noticed some heavier gauge channel which got me thinking about your idea of building a rack on wheels, could make something really strong and custom that would suit your needs really well. Even use bigger casters, locking casters, lots of possibilities when your making it yourself.

Yes the mind spins with possibilities. I sometimes go to a scrap yard where I can get really heavier gauge and dimension aluminum angles, bars, channels as well as plate. Not always easy to get exactly quantities of what you want.

Some of the nicest larger and heavier casters are made for rolling scaffolding (painters, electricians, plumbers often use them in commercial buildings). Non marring rubber on the wheels for hard floors but large enough diameter to roll nicely on carpeted floors.

I will take pics but this is a future project. First I have to decide between two rooms. Then have to run at least three new 15amp circuits to the room (two for computer system and better lighting, one for room a/c). Then have to break those circuits into distributed electrical outlet boxes... maybe Plugmold(tm). Then run high performance coax there for the modem straight from the house entry (not shared with TV).

OG
Evolving Plan
(35 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Xeon W3680 Westmere-EP Gigabyte GA-X58A-UD3R (Rev. 2) PNY (Nvidia) Quadro 2000 1GB PNY (Nvidia) Quadro 400 for 3rd monitor 
RAMHard DriveHard DriveHard Drive
Mushkin Silverline (6 x 4)=24 GB DDR3 1333 C(OS): 120GB OCZ Vertex 3 - MAX IOPS Edition, S... D(Data): two WD RE4 1TB 3.0Gb/s (RAID 1)  Two WD RE4 1TB 3.0Gb/s to be used in hot swap b... 
Hard DriveHard DriveHard DriveOptical Drive
WD Blue 500AZLX 500GB, in hot swap bay. Used t... Two PATA legacy drives mounted between PSU (rea... LaCie D2 Quadra 1TB e-SATA 3.0 Gb/s (for immedi... Sony Optiarc AD-7261S-OB 
CoolingCoolingCoolingCooling
Case stock fans: one 230mm front intake, two 23... CM External GPU Duct & CM 120mm Ex. Fan Noctua NF-P14 FLX 140mm (addl. bottom case intake) Noctua NF-P14 FLX 140mm (addl. rear case exhaust) 
CoolingCoolingCoolingCooling
Prolimatech Megahalems Rev. B. CPU heat sink Noctua NF-P12 1300R 120mm push fan on CPU heat ... Scythe Kaze Master Pro 6 channel fan controller 70mm fan on i-Star hot swap HDD cage (disconnec... 
OSMonitorMonitorMonitor
Windows 7 Professional 64 bit HP Pavilion 23xi HP Pavillion 27xi (1) HP Pavillion 27xi (2) 
KeyboardPowerCaseMouse
Logitech K330 Wireless w/mouse Seasonic Platinum-860 80 Plus 860 Watts ... CM ATCS 840 (minor mods) Logitech K330 wireless 
Mouse PadAudioOtherOther
Some freebee with an advert on it Cyber Acoustics CA-1001WB 5.25" Drive Bay for now  i-Star USA three bay, 3.5" hot swap cage (in tw... Drive A: Internal FDD w/ multi card readers & 1... 
OtherOtherOther
Startech USB 2.0. 7 port PCI Card 8GB Verbatim Flash Drive. Internal system docu... Netgear N900 Router 
  hide details  
Reply
Evolving Plan
(35 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Xeon W3680 Westmere-EP Gigabyte GA-X58A-UD3R (Rev. 2) PNY (Nvidia) Quadro 2000 1GB PNY (Nvidia) Quadro 400 for 3rd monitor 
RAMHard DriveHard DriveHard Drive
Mushkin Silverline (6 x 4)=24 GB DDR3 1333 C(OS): 120GB OCZ Vertex 3 - MAX IOPS Edition, S... D(Data): two WD RE4 1TB 3.0Gb/s (RAID 1)  Two WD RE4 1TB 3.0Gb/s to be used in hot swap b... 
Hard DriveHard DriveHard DriveOptical Drive
WD Blue 500AZLX 500GB, in hot swap bay. Used t... Two PATA legacy drives mounted between PSU (rea... LaCie D2 Quadra 1TB e-SATA 3.0 Gb/s (for immedi... Sony Optiarc AD-7261S-OB 
CoolingCoolingCoolingCooling
Case stock fans: one 230mm front intake, two 23... CM External GPU Duct & CM 120mm Ex. Fan Noctua NF-P14 FLX 140mm (addl. bottom case intake) Noctua NF-P14 FLX 140mm (addl. rear case exhaust) 
CoolingCoolingCoolingCooling
Prolimatech Megahalems Rev. B. CPU heat sink Noctua NF-P12 1300R 120mm push fan on CPU heat ... Scythe Kaze Master Pro 6 channel fan controller 70mm fan on i-Star hot swap HDD cage (disconnec... 
OSMonitorMonitorMonitor
Windows 7 Professional 64 bit HP Pavilion 23xi HP Pavillion 27xi (1) HP Pavillion 27xi (2) 
KeyboardPowerCaseMouse
Logitech K330 Wireless w/mouse Seasonic Platinum-860 80 Plus 860 Watts ... CM ATCS 840 (minor mods) Logitech K330 wireless 
Mouse PadAudioOtherOther
Some freebee with an advert on it Cyber Acoustics CA-1001WB 5.25" Drive Bay for now  i-Star USA three bay, 3.5" hot swap cage (in tw... Drive A: Internal FDD w/ multi card readers & 1... 
OtherOtherOther
Startech USB 2.0. 7 port PCI Card 8GB Verbatim Flash Drive. Internal system docu... Netgear N900 Router 
  hide details  
Reply
post #4384 of 4389
Feet - I used the MNPCTech feet, but changed to bolts having M4.7 threads, they screw right in.

Fans – If you ever want to replace the stock 230mm fans with high pressure 140mm fans, check out the adapter made by elegantmarket on eBay, search terms “140mm to 200mm Flat Fan Adapter”.
Edited by Manjusri - 11/14/16 at 4:29pm
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7-4790K Asus Sabertooth Z97 mk 2 CPU Corsair Vengeance 32GB 
Hard DriveOptical DriveCoolingOS
Samsung 840 Pro Plextor PX-891SAF  Noctua NH-U14S  Windows 7 Ultimate 64-bit 
MonitorKeyboardPowerCase
Dell U2412M Topre RealForce 103U Corsair 750HX CM ATCS 840 black 
Mouse
Asus Gladius 
  hide details  
Reply
My System
(14 items)
 
  
CPUMotherboardGraphicsRAM
i7-4790K Asus Sabertooth Z97 mk 2 CPU Corsair Vengeance 32GB 
Hard DriveOptical DriveCoolingOS
Samsung 840 Pro Plextor PX-891SAF  Noctua NH-U14S  Windows 7 Ultimate 64-bit 
MonitorKeyboardPowerCase
Dell U2412M Topre RealForce 103U Corsair 750HX CM ATCS 840 black 
Mouse
Asus Gladius 
  hide details  
Reply
post #4385 of 4389
I've got a custom painted case (painted for ATI back in the day) that I no longer have use for. I have done a few builds with it and the paint is still pretty much perfect on the outside. I still have the large fans and I think everything except the brackets that were to be used if you switched to smaller top fans. Is there any interest in this? I am in the Toronto Canada area so shipping would be a concern if you are not in Canada.
post #4386 of 4389
Hi All,

Has anyone tried or managed to fit a Corsair H115 into the 840? I have an old H80 that is starting to wear out and apparently needs replacing and I'd prefer to move to a larger radiator going forward. Appreciate any help here.

-Scott
post #4387 of 4389
I'm using a Nepton 280 inside my ATCS 840 - but had to use some tyrips to secure the right hand side of the radiator (when looking from the side). But it works fine for me smile.gif

NtZCoJc.jpg


And a more recent picture of the build.

krIEDOX.jpg
post #4388 of 4389
Hi guys. My bookmarks evaporated and none of the backups worked. So I'm having to manually re-build all my bookmarks. Including this one. So I thought I'd check in.

Still loving this case build. Had some funny system behavior and it was just so easy to open up this case, trace cabling, disconnect components, troubleshoot and reconnect. I think it was the 2nd GPU card.

I'm going to have to upgrade my C:OS SSD, and do a clean OS install. And while I really can't seem to find the time, I'm comfortable this case will ease the pain because everything is so accessible.

OG
Evolving Plan
(35 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Xeon W3680 Westmere-EP Gigabyte GA-X58A-UD3R (Rev. 2) PNY (Nvidia) Quadro 2000 1GB PNY (Nvidia) Quadro 400 for 3rd monitor 
RAMHard DriveHard DriveHard Drive
Mushkin Silverline (6 x 4)=24 GB DDR3 1333 C(OS): 120GB OCZ Vertex 3 - MAX IOPS Edition, S... D(Data): two WD RE4 1TB 3.0Gb/s (RAID 1)  Two WD RE4 1TB 3.0Gb/s to be used in hot swap b... 
Hard DriveHard DriveHard DriveOptical Drive
WD Blue 500AZLX 500GB, in hot swap bay. Used t... Two PATA legacy drives mounted between PSU (rea... LaCie D2 Quadra 1TB e-SATA 3.0 Gb/s (for immedi... Sony Optiarc AD-7261S-OB 
CoolingCoolingCoolingCooling
Case stock fans: one 230mm front intake, two 23... CM External GPU Duct & CM 120mm Ex. Fan Noctua NF-P14 FLX 140mm (addl. bottom case intake) Noctua NF-P14 FLX 140mm (addl. rear case exhaust) 
CoolingCoolingCoolingCooling
Prolimatech Megahalems Rev. B. CPU heat sink Noctua NF-P12 1300R 120mm push fan on CPU heat ... Scythe Kaze Master Pro 6 channel fan controller 70mm fan on i-Star hot swap HDD cage (disconnec... 
OSMonitorMonitorMonitor
Windows 7 Professional 64 bit HP Pavilion 23xi HP Pavillion 27xi (1) HP Pavillion 27xi (2) 
KeyboardPowerCaseMouse
Logitech K330 Wireless w/mouse Seasonic Platinum-860 80 Plus 860 Watts ... CM ATCS 840 (minor mods) Logitech K330 wireless 
Mouse PadAudioOtherOther
Some freebee with an advert on it Cyber Acoustics CA-1001WB 5.25" Drive Bay for now  i-Star USA three bay, 3.5" hot swap cage (in tw... Drive A: Internal FDD w/ multi card readers & 1... 
OtherOtherOther
Startech USB 2.0. 7 port PCI Card 8GB Verbatim Flash Drive. Internal system docu... Netgear N900 Router 
  hide details  
Reply
Evolving Plan
(35 items)
 
  
CPUMotherboardGraphicsGraphics
Intel Xeon W3680 Westmere-EP Gigabyte GA-X58A-UD3R (Rev. 2) PNY (Nvidia) Quadro 2000 1GB PNY (Nvidia) Quadro 400 for 3rd monitor 
RAMHard DriveHard DriveHard Drive
Mushkin Silverline (6 x 4)=24 GB DDR3 1333 C(OS): 120GB OCZ Vertex 3 - MAX IOPS Edition, S... D(Data): two WD RE4 1TB 3.0Gb/s (RAID 1)  Two WD RE4 1TB 3.0Gb/s to be used in hot swap b... 
Hard DriveHard DriveHard DriveOptical Drive
WD Blue 500AZLX 500GB, in hot swap bay. Used t... Two PATA legacy drives mounted between PSU (rea... LaCie D2 Quadra 1TB e-SATA 3.0 Gb/s (for immedi... Sony Optiarc AD-7261S-OB 
CoolingCoolingCoolingCooling
Case stock fans: one 230mm front intake, two 23... CM External GPU Duct & CM 120mm Ex. Fan Noctua NF-P14 FLX 140mm (addl. bottom case intake) Noctua NF-P14 FLX 140mm (addl. rear case exhaust) 
CoolingCoolingCoolingCooling
Prolimatech Megahalems Rev. B. CPU heat sink Noctua NF-P12 1300R 120mm push fan on CPU heat ... Scythe Kaze Master Pro 6 channel fan controller 70mm fan on i-Star hot swap HDD cage (disconnec... 
OSMonitorMonitorMonitor
Windows 7 Professional 64 bit HP Pavilion 23xi HP Pavillion 27xi (1) HP Pavillion 27xi (2) 
KeyboardPowerCaseMouse
Logitech K330 Wireless w/mouse Seasonic Platinum-860 80 Plus 860 Watts ... CM ATCS 840 (minor mods) Logitech K330 wireless 
Mouse PadAudioOtherOther
Some freebee with an advert on it Cyber Acoustics CA-1001WB 5.25" Drive Bay for now  i-Star USA three bay, 3.5" hot swap cage (in tw... Drive A: Internal FDD w/ multi card readers & 1... 
OtherOtherOther
Startech USB 2.0. 7 port PCI Card 8GB Verbatim Flash Drive. Internal system docu... Netgear N900 Router 
  hide details  
Reply
post #4389 of 4389
Just Wanted to say The Old atcs 840 is going to be a servercase and will dust (wanted to say rust) away somewhere in the Attic.
But i will NEVER sell it
Will change to a Phanteks Enthoo Evolv M-ATX Tempered Glass.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Computer Cases
Overclock.net › Forums › Case Mods & Cases › Computer Cases › [Official] Cooler Master ATCS 840 Owners Club