I meant to post a while ago... anyway, here's mine, built mid-April (i7 2700K @ 5GHz, 1.425V in BIOS):
http://valid.canardpc.com/show_oc.php?id=2334534
I was particularly pleased to be able to run the RAM at its rated DDR3/2133 speed & timings without
any issues at all.
CPU is just using manual voltage atm though. Two weeks ago I built a 2600K system for a friend, runs
at 4.7 with offset, actually happier with that build as the fans spin low during idle, power consumption
less, etc. (I'm sure it could have run at 5 aswell, but the end user wanted to err on the side of caution).
I need to redo my unit with offset mode, stop the fans being maxed all the time (Q-fan profiles
in ASUS BIOS work rather well - both builds were ASUS boards, the other using a P8Z68-V).
Hey Fridge09, can you run Cinebench 10, Cinebench 11.520, SuperPI, wPrime, etc. on your 3770K/4.8?
Feel free to compare, should be interesting:
http://www.sgidepot.co.uk/misc/tests-jj.txt
http://www.sgidepot.co.uk/misc/aebench.html
http://www.sgidepot.co.uk/misc/viewperf.txt
Something I wasn't exepecting for my first SB oc experience: I was able to go past 4.8 without a single
error/crash at all, using the usual P95 & other tests. Maybe it's just the board I'm using, but the stability
is amazing. I'm sure it could do a lot more than 5, but for my benchmarking needs 5 is all I need. Reaching
5 merely required a couple of voltage bumps and that was it. Cooler is a Venomous-X btw, with two
Coolermaster Blade Master fans.
Ian.
http://valid.canardpc.com/show_oc.php?id=2334534
I was particularly pleased to be able to run the RAM at its rated DDR3/2133 speed & timings without
any issues at all.
CPU is just using manual voltage atm though. Two weeks ago I built a 2600K system for a friend, runs
at 4.7 with offset, actually happier with that build as the fans spin low during idle, power consumption
less, etc. (I'm sure it could have run at 5 aswell, but the end user wanted to err on the side of caution).
I need to redo my unit with offset mode, stop the fans being maxed all the time (Q-fan profiles
in ASUS BIOS work rather well - both builds were ASUS boards, the other using a P8Z68-V).
Hey Fridge09, can you run Cinebench 10, Cinebench 11.520, SuperPI, wPrime, etc. on your 3770K/4.8?
Feel free to compare, should be interesting:
http://www.sgidepot.co.uk/misc/tests-jj.txt
http://www.sgidepot.co.uk/misc/aebench.html
http://www.sgidepot.co.uk/misc/viewperf.txt
Something I wasn't exepecting for my first SB oc experience: I was able to go past 4.8 without a single
error/crash at all, using the usual P95 & other tests. Maybe it's just the board I'm using, but the stability
is amazing. I'm sure it could do a lot more than 5, but for my benchmarking needs 5 is all I need. Reaching
5 merely required a couple of voltage bumps and that was it. Cooler is a Venomous-X btw, with two
Coolermaster Blade Master fans.
Ian.
New i7 Build
(13 items) |
|
New i7 Build
(13 items) |
i just like using Aida64 my bad:thumb:
